lpfc 8.3.0 : Add BlockGuard support (T10-DIF) Part 2
Add SCSI data path, error handling, and debugfs code to complete
BlockGuard support.
Signed-off-by: James Smart <James.Smart@xxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_debugfs.c | 152 +++++++
drivers/scsi/lpfc/lpfc_mbox.c | 2
drivers/scsi/lpfc/lpfc_scsi.c | 874 +++++++++++++++++++++++++++++++++++++-
drivers/scsi/lpfc/lpfc_scsi.h | 2
drivers/scsi/lpfc/lpfc_sli.c | 13 +
5 files changed, 1026 insertions(+), 17 deletions(-)
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -907,6 +907,91 @@ out:
return rc;
}
+static int
+lpfc_debugfs_dumpData_open(struct inode *inode, struct file *file)
+{
+ struct lpfc_debug *debug;
+ int rc = -ENOMEM;
+
+ if (!_dump_buf_data)
+ return -EBUSY;
+
+ debug = kmalloc(sizeof(*debug), GFP_KERNEL);
+ if (!debug)
+ goto out;
+
+ /* Round to page boundry */
+ printk(KERN_ERR "BLKGRD %s: _dump_buf_data=0x%p\n",
+ __func__, _dump_buf_data);
+ debug->buffer = _dump_buf_data;
+ if (!debug->buffer) {
+ kfree(debug);
+ goto out;
+ }
+
+ debug->len = (1 << _dump_buf_data_order) << PAGE_SHIFT;
+ file->private_data = debug;
+
+ rc = 0;
+out:
+ return rc;
+}
+
+static int
+lpfc_debugfs_dumpDif_open(struct inode *inode, struct file *file)
+{
+ struct lpfc_debug *debug;
+ int rc = -ENOMEM;
+
+ if (!_dump_buf_dif)
+ return -EBUSY;
+
+ debug = kmalloc(sizeof(*debug), GFP_KERNEL);
+ if (!debug)
+ goto out;
+
+ /* Round to page boundry */
+ printk(KERN_ERR "BLKGRD %s: _dump_buf_dif=0x%p file=%s\n", __func__,
+ _dump_buf_dif, file->f_dentry->d_name.name);
+ debug->buffer = _dump_buf_dif;
+ if (!debug->buffer) {
+ kfree(debug);
+ goto out;
+ }
+
+ debug->len = (1 << _dump_buf_dif_order) << PAGE_SHIFT;
+ file->private_data = debug;
+
+ rc = 0;
+out:
+ return rc;
+}
+
+static ssize_t
+lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ /*
+ * The Data/DIF buffers only save one failing IO
+ * The write op is used as a reset mechanism after an IO has
+ * already been saved to the next one can be saved
+ */
+ spin_lock(&_dump_buf_lock);
+
+ memset((void *)_dump_buf_data, 0,
+ ((1 << PAGE_SHIFT) << _dump_buf_data_order));
+ memset((void *)_dump_buf_dif, 0,
+ ((1 << PAGE_SHIFT) << _dump_buf_dif_order));
+
+ _dump_buf_done = 0;
+
+ spin_unlock(&_dump_buf_lock);
+
+ return nbytes;
+}
+
+
+
/**
* lpfc_debugfs_nodelist_open - Open the nodelist debugfs file.
* @inode: The inode pointer that contains a vport pointer.
@@ -1035,6 +1120,17 @@ lpfc_debugfs_release(struct inode *inode, struct file *file)
return 0;
}
+static int
+lpfc_debugfs_dumpDataDif_release(struct inode *inode, struct file *file)
+{
+ struct lpfc_debug *debug = file->private_data;
+
+ debug->buffer = NULL;
+ kfree(debug);
+
+ return 0;
+}
+
#undef lpfc_debugfs_op_disc_trc
static struct file_operations lpfc_debugfs_op_disc_trc = {
.owner = THIS_MODULE,
@@ -1080,6 +1176,26 @@ static struct file_operations lpfc_debugfs_op_dumpHostSlim = {
.release = lpfc_debugfs_release,
};
+#undef lpfc_debugfs_op_dumpData
+static struct file_operations lpfc_debugfs_op_dumpData = {
+ .owner = THIS_MODULE,
+ .open = lpfc_debugfs_dumpData_open,
+ .llseek = lpfc_debugfs_lseek,
+ .read = lpfc_debugfs_read,
+ .write = lpfc_debugfs_dumpDataDif_write,
+ .release = lpfc_debugfs_dumpDataDif_release,
+};
+
+#undef lpfc_debugfs_op_dumpDif
+static struct file_operations lpfc_debugfs_op_dumpDif = {
+ .owner = THIS_MODULE,
+ .open = lpfc_debugfs_dumpDif_open,
+ .llseek = lpfc_debugfs_lseek,
+ .read = lpfc_debugfs_read,
+ .write = lpfc_debugfs_dumpDataDif_write,
+ .release = lpfc_debugfs_dumpDataDif_release,
+};
+
#undef lpfc_debugfs_op_slow_ring_trc
static struct file_operations lpfc_debugfs_op_slow_ring_trc = {
.owner = THIS_MODULE,
@@ -1176,6 +1292,32 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
goto debug_failed;
}
+ /* Setup dumpData */
+ snprintf(name, sizeof(name), "dumpData");
+ phba->debug_dumpData =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dumpData);
+ if (!phba->debug_dumpData) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0800 Cannot create debugfs dumpData\n");
+ goto debug_failed;
+ }
+
+ /* Setup dumpDif */
+ snprintf(name, sizeof(name), "dumpDif");
+ phba->debug_dumpDif =
+ debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_op_dumpDif);
+ if (!phba->debug_dumpDif) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "0801 Cannot create debugfs dumpDif\n");
+ goto debug_failed;
+ }
+
+
+
/* Setup slow ring trace */
if (lpfc_debugfs_max_slow_ring_trc) {
num = lpfc_debugfs_max_slow_ring_trc - 1;
@@ -1340,6 +1482,16 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
debugfs_remove(phba->debug_dumpHostSlim); /* HostSlim */
phba->debug_dumpHostSlim = NULL;
}
+ if (phba->debug_dumpData) {
+ debugfs_remove(phba->debug_dumpData); /* dumpData */
+ phba->debug_dumpData = NULL;
+ }
+
+ if (phba->debug_dumpDif) {
+ debugfs_remove(phba->debug_dumpDif); /* dumpDif */
+ phba->debug_dumpDif = NULL;
+ }
+
if (phba->slow_ring_trc) {
kfree(phba->slow_ring_trc);
phba->slow_ring_trc = NULL;
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1099,6 +1099,8 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
/* If HBA supports SLI=3 ask for it */
if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) {
+ if (phba->cfg_enable_bg)
+ mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -18,13 +18,14 @@
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
-
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>
@@ -43,6 +44,73 @@
#define LPFC_RESET_WAIT 2
#define LPFC_ABORT_WAIT 2
+int _dump_buf_done;
+
+static char *dif_op_str[] = {
+ "SCSI_PROT_NORMAL",
+ "SCSI_PROT_READ_INSERT",
+ "SCSI_PROT_WRITE_STRIP",
+ "SCSI_PROT_READ_STRIP",
+ "SCSI_PROT_WRITE_INSERT",
+ "SCSI_PROT_READ_PASS",
+ "SCSI_PROT_WRITE_PASS",
+ "SCSI_PROT_READ_CONVERT",
+ "SCSI_PROT_WRITE_CONVERT"
+};
+
+static void
+lpfc_debug_save_data(struct scsi_cmnd *cmnd)
+{
+ void *src, *dst;
+ struct scatterlist *sgde = scsi_sglist(cmnd);
+
+ if (!_dump_buf_data) {
+ printk(KERN_ERR "BLKGRD ERROR %s _dump_buf_data is NULL\n",
+ __func__);
+ return;
+ }
+
+
+ if (!sgde) {
+ printk(KERN_ERR "BLKGRD ERROR: data scatterlist is null\n");
+ return;
+ }
+
+ dst = (void *) _dump_buf_data;
+ while (sgde) {
+ src = sg_virt(sgde);
+ memcpy(dst, src, sgde->length);
+ dst += sgde->length;
+ sgde = sg_next(sgde);
+ }
+}
+
+static void
+lpfc_debug_save_dif(struct scsi_cmnd *cmnd)
+{
+ void *src, *dst;
+ struct scatterlist *sgde = scsi_prot_sglist(cmnd);
+
+ if (!_dump_buf_dif) {
+ printk(KERN_ERR "BLKGRD ERROR %s _dump_buf_data is NULL\n",
+ __func__);
+ return;
+ }
+
+ if (!sgde) {
+ printk(KERN_ERR "BLKGRD ERROR: prot scatterlist is null\n");
+ return;
+ }
+
+ dst = _dump_buf_dif;
+ while (sgde) {
+ src = sg_virt(sgde);
+ memcpy(dst, src, sgde->length);
+ dst += sgde->length;
+ sgde = sg_next(sgde);
+ }
+}
+
/**
* lpfc_update_stats: Update statistical data for the command completion.
* @phba: Pointer to HBA object.
@@ -463,7 +531,8 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
*/
iocb = &psb->cur_iocbq.iocb;
iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
- if (phba->sli_rev == 3) {
+ if ((phba->sli_rev == 3) &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
/* fill in immediate fcp command BDE */
iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
@@ -516,6 +585,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
if (lpfc_cmd) {
lpfc_cmd->seg_cnt = 0;
lpfc_cmd->nonsg_phys = 0;
+ lpfc_cmd->prot_seg_cnt = 0;
}
spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
return lpfc_cmd;
@@ -590,7 +660,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
lpfc_cmd->seg_cnt = nseg;
if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
printk(KERN_ERR "%s: Too many sg segments from "
- "dma_map_sg. Config %d, seg_cnt %d",
+ "dma_map_sg. Config %d, seg_cnt %d\n",
__func__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
scsi_dma_unmap(scsi_cmnd);
@@ -609,6 +679,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
physaddr = sg_dma_address(sgel);
if (phba->sli_rev == 3 &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
nseg <= LPFC_EXT_DATA_BDE_COUNT) {
data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
data_bde->tus.f.bdeSize = sg_dma_len(sgel);
@@ -634,7 +705,8 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
* explicitly reinitialized and for SLI-3 the extended bde count is
* explicitly reinitialized since all iocb memory resources are reused.
*/
- if (phba->sli_rev == 3) {
+ if (phba->sli_rev == 3 &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
if (num_bde > LPFC_EXT_DATA_BDE_COUNT) {
/*
* The extended IOCB format can only fit 3 BDE or a BPL.
@@ -661,9 +733,685 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
((num_bde + 2) * sizeof(struct ulp_bde64));
}
fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
+
+ /*
+ * Due to difference in data length between DIF/non-DIF paths,
+ * we need to set word 4 of IOCB here
+ */
+ iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd));
return 0;
}
+/*
+ * Given a scsi cmnd, determine the BlockGuard profile to be used
+ * with the cmd
+ */
+static int
+lpfc_sc_to_sli_prof(struct scsi_cmnd *sc)
+{
+ uint8_t guard_type = scsi_host_get_guard(sc->device->host);
+ uint8_t ret_prof = LPFC_PROF_INVALID;
+
+ if (guard_type == SHOST_DIX_GUARD_IP) {
+ switch (scsi_get_prot_op(sc)) {
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ ret_prof = LPFC_PROF_AST2;
+ break;
+
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ ret_prof = LPFC_PROF_A1;
+ break;
+
+ case SCSI_PROT_READ_CONVERT:
+ case SCSI_PROT_WRITE_CONVERT:
+ ret_prof = LPFC_PROF_AST1;
+ break;
+
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ case SCSI_PROT_NORMAL:
+ default:
+ printk(KERN_ERR "Bad op/guard:%d/%d combination\n",
+ scsi_get_prot_op(sc), guard_type);
+ break;
+
+ }
+ } else if (guard_type == SHOST_DIX_GUARD_CRC) {
+ switch (scsi_get_prot_op(sc)) {
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ ret_prof = LPFC_PROF_A1;
+ break;
+
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ ret_prof = LPFC_PROF_C1;
+ break;
+
+ case SCSI_PROT_READ_CONVERT:
+ case SCSI_PROT_WRITE_CONVERT:
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ case SCSI_PROT_NORMAL:
+ default:
+ printk(KERN_ERR "Bad op/guard:%d/%d combination\n",
+ scsi_get_prot_op(sc), guard_type);
+ break;
+ }
+ } else {
+ /* unsupported format */
+ BUG();
+ }
+
+ return ret_prof;
+}
+
+struct scsi_dif_tuple {
+ __be16 guard_tag; /* Checksum */
+ __be16 app_tag; /* Opaque storage */
+ __be32 ref_tag; /* Target LBA or indirect LBA */
+};
+
+static inline unsigned
+lpfc_cmd_blksize(struct scsi_cmnd *sc)
+{
+ return sc->device->sector_size;
+}
+
+/**
+ * lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command
+ * @sc: in: SCSI command
+ * @apptagmask out: app tag mask
+ * @apptagval out: app tag value
+ * @reftag out: ref tag (reference tag)
+ *
+ * Description:
+ * Extract DIF paramters from the command if possible. Otherwise,
+ * use default paratmers.
+ *
+ **/
+static inline void
+lpfc_get_cmd_dif_parms(struct scsi_cmnd *sc, uint16_t *apptagmask,
+ uint16_t *apptagval, uint32_t *reftag)
+{
+ struct scsi_dif_tuple *spt;
+ unsigned char op = scsi_get_prot_op(sc);
+ unsigned int protcnt = scsi_prot_sg_count(sc);
+ static int cnt;
+
+ if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
+ op == SCSI_PROT_WRITE_PASS ||
+ op == SCSI_PROT_WRITE_CONVERT)) {
+
+ cnt++;
+ spt = page_address(sg_page(scsi_prot_sglist(sc))) +
+ scsi_prot_sglist(sc)[0].offset;
+ *apptagmask = 0;
+ *apptagval = 0;
+ *reftag = cpu_to_be32(spt->ref_tag);
+
+ } else {
+ /* SBC defines ref tag to be lower 32bits of LBA */
+ *reftag = (uint32_t) (0xffffffff & scsi_get_lba(sc));
+ *apptagmask = 0;
+ *apptagval = 0;
+ }
+}
+
+/*
+ * This function sets up buffer list for protection groups of
+ * type LPFC_PG_TYPE_NO_DIF
+ *
+ * This is usually used when the HBA is instructed to generate
+ * DIFs and insert them into data stream (or strip DIF from
+ * incoming data stream)
+ *
+ * The buffer list consists of just one protection group described
+ * below:
+ * +-------------------------+
+ * start of prot group --> | PDE_1 |
+ * +-------------------------+
+ * | Data BDE |
+ * +-------------------------+
+ * |more Data BDE's ... (opt)|
+ * +-------------------------+
+ *
+ * @sc: pointer to scsi command we're working on
+ * @bpl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ *
+ * Note: Data s/g buffers have been dma mapped
+ */
+static int
+lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+ struct ulp_bde64 *bpl, int datasegcnt)
+{
+ struct scatterlist *sgde = NULL; /* s/g data entry */
+ struct lpfc_pde *pde1 = NULL;
+ dma_addr_t physaddr;
+ int i = 0, num_bde = 0;
+ int datadir = sc->sc_data_direction;
+ int prof = LPFC_PROF_INVALID;
+ unsigned blksize;
+ uint32_t reftag;
+ uint16_t apptagmask, apptagval;
+
+ pde1 = (struct lpfc_pde *) bpl;
+ prof = lpfc_sc_to_sli_prof(sc);
+
+ if (prof == LPFC_PROF_INVALID)
+ goto out;
+
+ /* extract some info from the scsi command for PDE1*/
+ blksize = lpfc_cmd_blksize(sc);
+ lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag);
+
+ /* setup PDE1 with what we have */
+ lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize,
+ BG_EC_STOP_ERR);
+ lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag);
+
+ num_bde++;
+ bpl++;
+
+ /* assumption: caller has already run dma_map_sg on command data */
+ scsi_for_each_sg(sc, sgde, datasegcnt, i) {
+ physaddr = sg_dma_address(sgde);
+ bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
+ bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
+ bpl->tus.f.bdeSize = sg_dma_len(sgde);
+ if (datadir == DMA_TO_DEVICE)
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ else
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
+ bpl->tus.w = le32_to_cpu(bpl->tus.w);
+ bpl++;
+ num_bde++;
+ }
+
+out:
+ return num_bde;
+}
+
+/*
+ * This function sets up buffer list for protection groups of
+ * type LPFC_PG_TYPE_DIF_BUF
+ *
+ * This is usually used when DIFs are in their own buffers,
+ * separate from the data. The HBA can then by instructed
+ * to place the DIFs in the outgoing stream. For read operations,
+ * The HBA could extract the DIFs and place it in DIF buffers.
+ *
+ * The buffer list for this type consists of one or more of the
+ * protection groups described below:
+ * +-------------------------+
+ * start of first prot group --> | PDE_1 |
+ * +-------------------------+
+ * | PDE_3 (Prot BDE) |
+ * +-------------------------+
+ * | Data BDE |
+ * +-------------------------+
+ * |more Data BDE's ... (opt)|
+ * +-------------------------+
+ * start of new prot group --> | PDE_1 |
+ * +-------------------------+
+ * | ... |
+ * +-------------------------+
+ *
+ * @sc: pointer to scsi command we're working on
+ * @bpl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ * @protcnt: number of segment of protection data that have been dma mapped
+ *
+ * Note: It is assumed that both data and protection s/g buffers have been
+ * mapped for DMA
+ */
+static int
+lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+ struct ulp_bde64 *bpl, int datacnt, int protcnt)
+{
+ struct scatterlist *sgde = NULL; /* s/g data entry */
+ struct scatterlist *sgpe = NULL; /* s/g prot entry */
+ struct lpfc_pde *pde1 = NULL;
+ struct ulp_bde64 *prot_bde = NULL;
+ dma_addr_t dataphysaddr, protphysaddr;
+ unsigned short curr_data = 0, curr_prot = 0;
+ unsigned int split_offset, protgroup_len;
+ unsigned int protgrp_blks, protgrp_bytes;
+ unsigned int remainder, subtotal;
+ int prof = LPFC_PROF_INVALID;
+ int datadir = sc->sc_data_direction;
+ unsigned char pgdone = 0, alldone = 0;
+ unsigned blksize;
+ uint32_t reftag;
+ uint16_t apptagmask, apptagval;
+ int num_bde = 0;
+
+ sgpe = scsi_prot_sglist(sc);
+ sgde = scsi_sglist(sc);
+
+ if (!sgpe || !sgde) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9020 Invalid s/g entry: data=0x%p prot=0x%p\n",
+ sgpe, sgde);
+ return 0;
+ }
+
+ prof = lpfc_sc_to_sli_prof(sc);
+ if (prof == LPFC_PROF_INVALID)
+ goto out;
+
+ /* extract some info from the scsi command for PDE1*/
+ blksize = lpfc_cmd_blksize(sc);
+ lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag);
+
+ split_offset = 0;
+ do {
+ /* setup the first PDE_1 */
+ pde1 = (struct lpfc_pde *) bpl;
+
+ lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize,
+ BG_EC_STOP_ERR);
+ lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag);
+
+ num_bde++;
+ bpl++;
+
+ /* setup the first BDE that points to protection buffer */
+ prot_bde = (struct ulp_bde64 *) bpl;
+ protphysaddr = sg_dma_address(sgpe);
+ prot_bde->addrLow = le32_to_cpu(putPaddrLow(protphysaddr));
+ prot_bde->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr));
+ protgroup_len = sg_dma_len(sgpe);
+
+
+ /* must be integer multiple of the DIF block length */
+ BUG_ON(protgroup_len % 8);
+
+ protgrp_blks = protgroup_len / 8;
+ protgrp_bytes = protgrp_blks * blksize;
+
+ prot_bde->tus.f.bdeSize = protgroup_len;
+ if (datadir == DMA_TO_DEVICE)
+ prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ else
+ prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
+ prot_bde->tus.w = le32_to_cpu(bpl->tus.w);
+
+ curr_prot++;
+ num_bde++;
+
+ /* setup BDE's for data blocks associated with DIF data */
+ pgdone = 0;
+ subtotal = 0; /* total bytes processed for current prot grp */
+ while (!pgdone) {
+ if (!sgde) {
+ printk(KERN_ERR "%s Invalid data segment\n",
+ __func__);
+ return 0;
+ }
+ bpl++;
+ dataphysaddr = sg_dma_address(sgde) + split_offset;
+ bpl->addrLow = le32_to_cpu(putPaddrLow(dataphysaddr));
+ bpl->addrHigh = le32_to_cpu(putPaddrHigh(dataphysaddr));
+
+ remainder = sg_dma_len(sgde) - split_offset;
+
+ if ((subtotal + remainder) <= protgrp_bytes) {
+ /* we can use this whole buffer */
+ bpl->tus.f.bdeSize = remainder;
+ split_offset = 0;
+
+ if ((subtotal + remainder) == protgrp_bytes)
+ pgdone = 1;
+ } else {
+ /* must split this buffer with next prot grp */
+ bpl->tus.f.bdeSize = protgrp_bytes - subtotal;
+ split_offset += bpl->tus.f.bdeSize;
+ }
+
+ subtotal += bpl->tus.f.bdeSize;
+
+ if (datadir == DMA_TO_DEVICE)
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ else
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
+ bpl->tus.w = le32_to_cpu(bpl->tus.w);
+
+ num_bde++;
+ curr_data++;
+
+ if (split_offset)
+ break;
+
+ /* Move to the next s/g segment if possible */
+ sgde = sg_next(sgde);
+ }
+
+ /* are we done ? */
+ if (curr_prot == protcnt) {
+ alldone = 1;
+ } else if (curr_prot < protcnt) {
+ /* advance to next prot buffer */
+ sgpe = sg_next(sgpe);
+ bpl++;
+
+ /* update the reference tag */
+ reftag += protgrp_blks;
+ } else {
+ /* if we're here, we have a bug */
+ printk(KERN_ERR "BLKGRD: bug in %s\n", __func__);
+ }
+
+ } while (!alldone);
+
+out:
+
+
+ return num_bde;
+}
+/*
+ * Given a SCSI command that supports DIF, determine composition of protection
+ * groups involved in setting up buffer lists
+ *
+ * Returns:
+ * for DIF (for both read and write)
+ * */
+static int
+lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
+{
+ int ret = LPFC_PG_TYPE_INVALID;
+ unsigned char op = scsi_get_prot_op(sc);
+
+ switch (op) {
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ ret = LPFC_PG_TYPE_NO_DIF;
+ break;
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ case SCSI_PROT_WRITE_CONVERT:
+ case SCSI_PROT_READ_CONVERT:
+ ret = LPFC_PG_TYPE_DIF_BUF;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9021 Unsupported protection op:%d\n", op);
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * This is the protection/DIF aware version of
+ * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
+ * two functions eventually, but for now, it's here
+ */
+static int
+lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
+ struct lpfc_scsi_buf *lpfc_cmd)
+{
+ struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+ struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+ struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
+ IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+ uint32_t num_bde = 0;
+ int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
+ int prot_group_type = 0;
+ int diflen, fcpdl;
+ unsigned blksize;
+
+ /*
+ * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
+ * fcp_rsp regions to the first data bde entry
+ */
+ bpl += 2;
+ if (scsi_sg_count(scsi_cmnd)) {
+ /*
+ * The driver stores the segment count returned from pci_map_sg
+ * because this a count of dma-mappings used to map the use_sg
+ * pages. They are not guaranteed to be the same for those
+ * architectures that implement an IOMMU.
+ */
+ datasegcnt = dma_map_sg(&phba->pcidev->dev,
+ scsi_sglist(scsi_cmnd),
+ scsi_sg_count(scsi_cmnd), datadir);
+ if (unlikely(!datasegcnt))
+ return 1;
+
+ lpfc_cmd->seg_cnt = datasegcnt;
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+ printk(KERN_ERR "%s: Too many sg segments from "
+ "dma_map_sg. Config %d, seg_cnt %d\n",
+ __func__, phba->cfg_sg_seg_cnt,
+ lpfc_cmd->seg_cnt);
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
+
+ switch (prot_group_type) {
+ case LPFC_PG_TYPE_NO_DIF:
+ num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
+ datasegcnt);
+ /* we shoud have 2 or more entries in buffer list */
+ if (num_bde < 2)
+ goto err;
+ break;
+ case LPFC_PG_TYPE_DIF_BUF:{
+ /*
+ * This type indicates that protection buffers are
+ * passed to the driver, so that needs to be prepared
+ * for DMA
+ */
+ protsegcnt = dma_map_sg(&phba->pcidev->dev,
+ scsi_prot_sglist(scsi_cmnd),
+ scsi_prot_sg_count(scsi_cmnd), datadir);
+ if (unlikely(!protsegcnt)) {
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ lpfc_cmd->prot_seg_cnt = protsegcnt;
+ if (lpfc_cmd->prot_seg_cnt
+ > phba->cfg_prot_sg_seg_cnt) {
+ printk(KERN_ERR "%s: Too many prot sg segments "
+ "from dma_map_sg. Config %d,"
+ "prot_seg_cnt %d\n", __func__,
+ phba->cfg_prot_sg_seg_cnt,
+ lpfc_cmd->prot_seg_cnt);
+ dma_unmap_sg(&phba->pcidev->dev,
+ scsi_prot_sglist(scsi_cmnd),
+ scsi_prot_sg_count(scsi_cmnd),
+ datadir);
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
+ datasegcnt, protsegcnt);
+ /* we shoud have 3 or more entries in buffer list */
+ if (num_bde < 3)
+ goto err;
+ break;
+ }
+ case LPFC_PG_TYPE_INVALID:
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9022 Unexpected protection group %i\n",
+ prot_group_type);
+ return 1;
+ }
+ }
+
+ /*
+ * Finish initializing those IOCB fields that are dependent on the
+ * scsi_cmnd request_buffer. Note that the bdeSize is explicitly
+ * reinitialized since all iocb memory resources are used many times
+ * for transmit, receive, and continuation bpl's.
+ */
+ iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
+ iocb_cmd->un.fcpi64.bdl.bdeSize += (num_bde * sizeof(struct ulp_bde64));
+ iocb_cmd->ulpBdeCount = 1;
+ iocb_cmd->ulpLe = 1;
+
+ fcpdl = scsi_bufflen(scsi_cmnd);
+
+ if (scsi_get_prot_type(scsi_cmnd) == SCSI_PROT_DIF_TYPE1) {
+ /*
+ * We are in DIF Type 1 mode
+ * Every data block has a 8 byte DIF (trailer)
+ * attached to it. Must ajust FCP data length
+ */
+ blksize = lpfc_cmd_blksize(scsi_cmnd);
+ diflen = (fcpdl / blksize) * 8;
+ fcpdl += diflen;
+ }
+ fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
+
+ /*
+ * Due to difference in data length between DIF/non-DIF paths,
+ * we need to set word 4 of IOCB here
+ */
+ iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
+
+ return 0;
+err:
+ lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+ "9023 Could not setup all needed BDE's"
+ "prot_group_type=%d, num_bde=%d\n",
+ prot_group_type, num_bde);
+ return 1;
+}
+
+/*
+ * This function checks for BlockGuard errors detected by
+ * the HBA. In case of errors, the ASC/ASCQ fields in the
+ * sense buffer will be set accordingly, paired with
+ * ILLEGAL_REQUEST to signal to the kernel that the HBA
+ * detected corruption.
+ *
+ * Returns:
+ * 0 - No error found
+ * 1 - BlockGuard error found
+ * -1 - Internal error (bad profile, ...etc)
+ */
+static int
+lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_iocbq *pIocbOut)
+{
+ struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
+ struct sli3_bg_fields *bgf = &pIocbOut->iocb.unsli3.sli3_bg;
+ int ret = 0;
+ uint32_t bghm = bgf->bghm;
+ uint32_t bgstat = bgf->bgstat;
+ uint64_t failing_sector = 0;
+
+ printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%lx "
+ "bgstat=0x%x bghm=0x%x\n",
+ cmd->cmnd[0], (u64)scsi_get_lba(cmd),
+ cmd->request->nr_sectors, bgstat, bghm);
+
+ spin_lock(&_dump_buf_lock);
+ if (!_dump_buf_done) {
+ printk(KERN_ERR "Saving Data for %u blocks to debugfs\n",
+ (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
+ lpfc_debug_save_data(cmd);
+
+ /* If we have a prot sgl, save the DIF buffer */
+ if (lpfc_prot_group_type(phba, cmd) ==
+ LPFC_PG_TYPE_DIF_BUF) {
+ printk(KERN_ERR "Saving DIF for %u blocks to debugfs\n",
+ (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
+ lpfc_debug_save_dif(cmd);
+ }
+
+ _dump_buf_done = 1;
+ }
+ spin_unlock(&_dump_buf_lock);
+
+ if (lpfc_bgs_get_invalid_prof(bgstat)) {
+ cmd->result = ScsiResult(DID_ERROR, 0);
+ printk(KERN_ERR "Invalid BlockGuard profile. bgstat:0x%x\n",
+ bgstat);
+ ret = (-1);
+ goto out;
+ }
+
+ if (lpfc_bgs_get_uninit_dif_block(bgstat)) {
+ cmd->result = ScsiResult(DID_ERROR, 0);
+ printk(KERN_ERR "Invalid BlockGuard DIF Block. bgstat:0x%x\n",
+ bgstat);
+ ret = (-1);
+ goto out;
+ }
+
+ if (lpfc_bgs_get_guard_err(bgstat)) {
+ ret = 1;
+
+ scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x10, 0x1);
+ cmd->result = (DRIVER_SENSE|SUGGEST_DIE) << 24
+ | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
+ phba->bg_guard_err_cnt++;
+ printk(KERN_ERR "BLKGRD: guard_tag error\n");
+ }
+
+ if (lpfc_bgs_get_reftag_err(bgstat)) {
+ ret = 1;
+
+ scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x10, 0x3);
+ cmd->result = (DRIVER_SENSE|SUGGEST_DIE) << 24
+ | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
+
+ phba->bg_reftag_err_cnt++;
+ printk(KERN_ERR "BLKGRD: ref_tag error\n");
+ }
+
+ if (lpfc_bgs_get_apptag_err(bgstat)) {
+ ret = 1;
+
+ scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
+ 0x10, 0x2);
+ cmd->result = (DRIVER_SENSE|SUGGEST_DIE) << 24
+ | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
+
+ phba->bg_apptag_err_cnt++;
+ printk(KERN_ERR "BLKGRD: app_tag error\n");
+ }
+
+ if (lpfc_bgs_get_hi_water_mark_present(bgstat)) {
+ /*
+ * setup sense data descriptor 0 per SPC-4 as an information
+ * field, and put the failing LBA in it
+ */
+ cmd->sense_buffer[8] = 0; /* Information */
+ cmd->sense_buffer[9] = 0xa; /* Add. length */
+ do_div(bghm, cmd->device->sector_size);
+
+ failing_sector = scsi_get_lba(cmd);
+ failing_sector += bghm;
+
+ put_unaligned_be64(failing_sector, &cmd->sense_buffer[10]);
+ }
+
+ if (!ret) {
+ /* No error was reported - problem in FW? */
+ cmd->result = ScsiResult(DID_ERROR, 0);
+ printk(KERN_ERR "BLKGRD: no errors reported!\n");
+ }
+
+out:
+ return ret;
+}
+
/**
* lpfc_send_scsi_error_event: Posts an event when there is SCSI error.
* @phba: Pointer to hba context object.
@@ -775,6 +1523,10 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
*/
if (psb->seg_cnt > 0)
scsi_dma_unmap(psb->pCmd);
+ if (psb->prot_seg_cnt > 0)
+ dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(psb->pCmd),
+ scsi_prot_sg_count(psb->pCmd),
+ psb->pCmd->sc_data_direction);
}
/**
@@ -828,7 +1580,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
logit = LOG_FCP;
lpfc_printf_vlog(vport, KERN_WARNING, logit,
- "0730 FCP command x%x failed: x%x SNS x%x x%x "
+ "9024 FCP command x%x failed: x%x SNS x%x x%x "
"Data: x%x x%x x%x x%x x%x\n",
cmnd->cmnd[0], scsi_status,
be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info,
@@ -851,7 +1603,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
- "0716 FCP Read Underrun, expected %d, "
+ "9025 FCP Read Underrun, expected %d, "
"residual %d Data: x%x x%x x%x\n",
be32_to_cpu(fcpcmd->fcpDl),
scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
@@ -867,7 +1619,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
(scsi_get_resid(cmnd) != fcpi_parm)) {
lpfc_printf_vlog(vport, KERN_WARNING,
LOG_FCP | LOG_FCP_ERROR,
- "0735 FCP Read Check Error "
+ "9026 FCP Read Check Error "
"and Underrun Data: x%x x%x x%x x%x\n",
be32_to_cpu(fcpcmd->fcpDl),
scsi_get_resid(cmnd), fcpi_parm,
@@ -886,7 +1638,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
(scsi_bufflen(cmnd) - scsi_get_resid(cmnd)
< cmnd->underflow)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
- "0717 FCP command x%x residual "
+ "9027 FCP command x%x residual "
"underrun converted to error "
"Data: x%x x%x x%x\n",
cmnd->cmnd[0], scsi_bufflen(cmnd),
@@ -895,7 +1647,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
}
} else if (resp_info & RESID_OVER) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
- "0720 FCP command x%x residual overrun error. "
+ "9028 FCP command x%x residual overrun error. "
"Data: x%x x%x \n", cmnd->cmnd[0],
scsi_bufflen(cmnd), scsi_get_resid(cmnd));
host_status = DID_ERROR;
@@ -907,7 +1659,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
} else if ((scsi_status == SAM_STAT_GOOD) && fcpi_parm &&
(cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
- "0734 FCP Read Check Error Data: "
+ "9029 FCP Read Check Error Data: "
"x%x x%x x%x x%x\n",
be32_to_cpu(fcpcmd->fcpDl),
be32_to_cpu(fcprsp->rspResId),
@@ -960,7 +1712,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
lpfc_cmd->status = IOSTAT_DEFAULT;
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
- "0729 FCP cmd x%x failed <%d/%d> "
+ "9030 FCP cmd x%x failed <%d/%d> "
"status: x%x result: x%x Data: x%x x%x\n",
cmd->cmnd[0],
cmd->device ? cmd->device->id : 0xffff,
@@ -1008,7 +1760,28 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
lpfc_cmd->result == IOERR_ABORT_REQUESTED) {
cmd->result = ScsiResult(DID_REQUEUE, 0);
break;
- } /* else: fall through */
+ }
+
+ if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED ||
+ lpfc_cmd->result == IOERR_TX_DMA_FAILED) &&
+ pIocbOut->iocb.unsli3.sli3_bg.bgstat) {
+ if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
+ /*
+ * This is a response for a BG enabled
+ * cmd. Parse BG error
+ */
+ lpfc_parse_bg_err(phba, lpfc_cmd,
+ pIocbOut);
+ break;
+ } else {
+ lpfc_printf_vlog(vport, KERN_WARNING,
+ LOG_BG,
+ "9031 non-zero BGSTAT "
+ "on unprotected cmd");
+ }
+ }
+
+ /* else: fall through */
default:
cmd->result = ScsiResult(DID_ERROR, 0);
break;
@@ -1243,7 +2016,6 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
} else {
iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
iocb_cmd->ulpPU = PARM_READ_CHECK;
- iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
fcp_cmnd->fcpCntl3 = READ_DATA;
phba->fc4InputRequests++;
}
@@ -1254,7 +2026,8 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
fcp_cmnd->fcpCntl3 = 0;
phba->fc4ControlRequests++;
}
- if (phba->sli_rev == 3)
+ if (phba->sli_rev == 3 &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED))
lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd);
/*
* Finish initializing those IOCB fields that are independent
@@ -1312,7 +2085,8 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
int_to_scsilun(lun, &fcp_cmnd->fcp_lun);
fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
- if (vport->phba->sli_rev == 3)
+ if (vport->phba->sli_rev == 3 &&
+ !(vport->phba->sli3_options & LPFC_SLI3_BG_ENABLED))
lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd);
piocb->ulpCommand = CMD_FCP_ICMND64_CR;
piocb->ulpContext = ndlp->nlp_rpi;
@@ -1541,6 +2315,17 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
goto out_fail_command;
}
+ if (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
+ scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
+
+ printk(KERN_ERR "BLKGRD ERROR: rcvd protected cmd:%02x op:%02x "
+ "str=%s without registering for BlockGuard - "
+ "Rejecting command\n",
+ cmnd->cmnd[0], scsi_get_prot_op(cmnd),
+ dif_op_str[scsi_get_prot_op(cmnd)]);
+ goto out_fail_command;
+ }
+
/*
* Catch race where our node has transitioned, but the
* transport is still transitioning.
@@ -1574,7 +2359,64 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
cmnd->host_scribble = (unsigned char *)lpfc_cmd;
cmnd->scsi_done = done;
- err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+ if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9033 BLKGRD: rcvd protected cmd:%02x op:%02x "
+ "str=%s\n",
+ cmnd->cmnd[0], scsi_get_prot_op(cmnd),
+ dif_op_str[scsi_get_prot_op(cmnd)]);
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9034 BLKGRD: CDB: %02x %02x %02x %02x %02x "
+ "%02x %02x %02x %02x %02x \n",
+ cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
+ cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
+ cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
+ cmnd->cmnd[9]);
+ if (cmnd->cmnd[0] == READ_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9035 BLKGRD: READ @ sector %llu, "
+ "count %lu\n",
+ (u64)scsi_get_lba(cmnd),
+ cmnd->request->nr_sectors);
+ else if (cmnd->cmnd[0] == WRITE_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9036 BLKGRD: WRITE @ sector %llu, "
+ "count %lu cmd=%p\n",
+ (u64)scsi_get_lba(cmnd),
+ cmnd->request->nr_sectors,
+ cmnd);
+
+ err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
+ } else {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9038 BLKGRD: rcvd unprotected cmd:%02x op:%02x"
+ " str=%s\n",
+ cmnd->cmnd[0], scsi_get_prot_op(cmnd),
+ dif_op_str[scsi_get_prot_op(cmnd)]);
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9039 BLKGRD: CDB: %02x %02x %02x %02x %02x "
+ "%02x %02x %02x %02x %02x \n",
+ cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
+ cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
+ cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
+ cmnd->cmnd[9]);
+ if (cmnd->cmnd[0] == READ_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9040 dbg: READ @ sector %llu, "
+ "count %lu\n", (u64)scsi_get_lba(cmnd),
+ cmnd->request->nr_sectors);
+ else if (cmnd->cmnd[0] == WRITE_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9041 dbg: WRITE @ sector %llu, "
+ "count %lu cmd=%p\n",
+ (u64)scsi_get_lba(cmnd),
+ cmnd->request->nr_sectors, cmnd);
+ else
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9042 dbg: parser not implemented\n");
+ err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+ }
+
if (err)
goto out_host_busy_free_buf;
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -124,6 +124,8 @@ struct lpfc_scsi_buf {
uint32_t seg_cnt; /* Number of scatter-gather segments returned by
* dma_map_sg. The driver needs this for calls
* to dma_unmap_sg. */
+ uint32_t prot_seg_cnt; /* seg_cnt's counterpart for protection data */
+
dma_addr_t nonsg_phys; /* Non scatter-gather physical address. */
/*
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -542,6 +542,7 @@ lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
*/
nextiocb->iocb.ulpIoTag = (nextiocb->iocb_cmpl) ? nextiocb->iotag : 0;
+
if (pring->ringno == LPFC_ELS_RING) {
lpfc_debugfs_slow_ring_trc(phba,
"IOCB cmd ring: wd4:x%08x wd6:x%08x wd7:x%08x",
@@ -3044,7 +3045,8 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
LPFC_SLI3_HBQ_ENABLED |
LPFC_SLI3_CRP_ENABLED |
- LPFC_SLI3_INB_ENABLED);
+ LPFC_SLI3_INB_ENABLED |
+ LPFC_SLI3_BG_ENABLED);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0442 Adapter failed to init, mbxCmd x%x "
@@ -3089,6 +3091,15 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
phba->inb_ha_copy = NULL;
phba->inb_counter = NULL;
}
+
+ if (phba->cfg_enable_bg) {
+ if (pmb->mb.un.varCfgPort.gbg)
+ phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
+ else
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0443 Adapter did not grant "
+ "BlockGuard\n");
+ }
} else {
phba->hbq_get = NULL;
phba->port_gp = phba->mbox->us.s2.port;
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
