On Mon, Nov 10, 2008 at 08:54:53PM -0800, Andrew Morton wrote:
> On Mon, 10 Nov 2008 20:20:57 -0800 James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx> wrote:
>
> > Could someone from Adaptec and Dell please verify that this is correct?
> > Mark Salyzyn no longer works there, but the aacraid@xxxxxxxxxxx address
> > is supposed to still be working.
>
> Here is the patch:
>
>
>
> From: Tomas Henzl <thenzl@xxxxxxxxxx>
>
> A lot of 64bit machines with Adaptec 2200S and 2120S controllers don't
> recognize SCSI disks any more with the patch "fix driver failure with Dell
> PowerEdge Expandable RAID Controller 3/Di", but fail with tons of "aac_srb:
> aac_fib_send failed with status: 8195" instead. This patch disables the
> quirk introduced in the change cited above for those two controllers again.
>
> Signed-off-by: Gernot Hillier <gernot.hillier@xxxxxxxxxxx>
> Signed-off-by: Tomas Henzl <thenzl@xxxxxxxxxx>
> Cc: <aacraid@xxxxxxxxxxx>
> Cc: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
> Tested-by: Thomas Guyot-Sionnest <dermoth@xxxxxx>
> Cc: <stable@xxxxxxxxxx> [2.6.27.x, 2.6.26.x, 2.6.25.x]
> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> ---
>
> drivers/scsi/aacraid/linit.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff -puN drivers/scsi/aacraid/linit.c~aacraid-disable-dell-percraid-quirk-on-adaptec-2200s-and-2120s drivers/scsi/aacraid/linit.c
> --- a/drivers/scsi/aacraid/linit.c~aacraid-disable-dell-percraid-quirk-on-adaptec-2200s-and-2120s
> +++ a/drivers/scsi/aacraid/linit.c
> @@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drive
> { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
> { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
> { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
> - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */
> - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */
> + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */
> + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */
> { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
> { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
> { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */
> _
Dell's storage teams have been investigating, to be sure those are the
only known affected cards. To the best of everyone's knowledge here,
this is correct.
Please apply at your earliest convenience.
Thanks,
Matt
--
Matt Domsch
Linux Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
