Shi, Harris <Harris.Shi@xxxxxxx> wrote: > Due to the current timeout management change, our RDAC (failover) driver > had some difficulties in handling SCSI I/O timeout. The RDAC driver is in > the similar layer as HBA driver in that it will register into scsi > mid-layer as scsi_host_template and stays below mid-layer. However, all > scsi I/Os coming to RDAC stack are routed by a path then dispatched to the > real HBA driver via mid-layer. We used to rely on the timer in > scsi_cmnd->eh_timeout to deal with scsi i/o coming into the RDAC stack. > Basically when I/O is coming to RDAC stack, we need to delete the timer > for each I/O. Then after selecting a specific path for this I/O, we need > to send the I/O back to mid-layer with a larger timeout value just to > avoid the forced failover. When I/O completes successfully, we added the > original timer back to the I/O and pass it over to upper block layer for > further process. > > > > However, with the current timeout management functions moving to block > layer, it became difficult for us to explicitly control the timeout value > for specific I/O. > > Can you shed some lights on how to handle the I/O based timeout in this > case? > Since long term mpp capabilities should be handled by dm-mp and the SCSI RDAC handler exporting functions to allow direct adding and deleting of the timer may not be something that would be needed long term. It may not be really clean to add these interfaces in. Could similar prior functionality be created by the following? 1.) To the RDAC vhba add a hostt->eh_timed_out function. In this timeout function return BLK_EH_RESET_TIMER until it is done with the command. Since the vhba does not have a transport scsi_times_out should call this function on every timeout. There is some overhead here depending on the default timeout value set in timing out and then resetting the timer. 2.) For each sdev that is taken over store the previous rq_timed_out_fn and then use blk_queue_rq_timed_out to set a mpp specific function for the requests sent to the real HBA drivers. 3.) Set the timeout in the real HBA driver requests prior to sending it to the mid layer. -andmike -- Michael Anderson andmike@xxxxxxxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
