This is the Common API for accessing the Kernel SAS Transport Layer. Signed-off-by: Eric Moore <eric.moore@xxxxxxx> --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c 1969-12-31 17:00:00.000000000 -0700 +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c 2008-11-03 11:37:19.000000000 -0700 @@ -0,0 +1,1197 @@ +/* + * SAS Transport Layer for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_transport.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@xxxxxxx) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport_sas.h> +#include <scsi/scsi_dbg.h> + +#include "mpt2sas_base.h" +/** + * _transport_sas_node_find_by_handle - sas node search + * @ioc: per adapter object + * @handle: expander or hba handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_node_lock. + * + * Search for either hba phys or expander device based on handle, then returns + * the sas_node object. + */ +static struct _sas_node * +_transport_sas_node_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + int i; + + for (i = 0; i < ioc->sas_hba.num_phys; i ++) + if (ioc->sas_hba.phy[i].handle == handle) + return &ioc->sas_hba; + + return scsih_expander_find_by_handle(ioc, handle); +} + +/** + * _transport_convert_phy_link_rate - + * @link_rate: link rate returned from mpt firmware + * + * Convert link_rate from mpi fusion into sas_transport form. + */ +static enum sas_linkrate +_transport_convert_phy_link_rate(u8 link_rate) +{ + enum sas_linkrate rc; + + switch(link_rate) { + case MPI2_SAS_NEG_LINK_RATE_1_5: + rc = SAS_LINK_RATE_1_5_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_3_0: + rc = SAS_LINK_RATE_3_0_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_6_0: + rc = SAS_LINK_RATE_6_0_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED: + rc = SAS_PHY_DISABLED; + break; + case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED: + rc = SAS_LINK_RATE_FAILED; + break; + case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR: + rc = SAS_SATA_PORT_SELECTOR; + break; + case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS: + rc = SAS_PHY_RESET_IN_PROGRESS; + break; + default: + case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE: + case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE: + rc = SAS_LINK_RATE_UNKNOWN; + break; + } + return rc; +} + +/** + * _transport_set_identify - set identify for phys and end devices + * @ioc: per adapter object + * @handle: device handle + * @identify: sas identify info + * + * Populates sas identify info. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_set_identify(struct MPT2SAS_ADAPTER *ioc, u16 handle, + struct sas_identify *identify) +{ + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + __le64 *sas_address; + u32 device_info; + u32 ioc_status; + + if ((config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)" + "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status, + __FILE__, __LINE__, __func__); + return -1; + } + + memset(identify, 0, sizeof(identify)); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + + /* sas_address */ + sas_address = (__le64 *)&sas_device_pg0.SASAddress; + *sas_address = le64_to_cpu(*sas_address); + identify->sas_address = *sas_address; + + /* device_type */ + switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { + case MPI2_SAS_DEVICE_INFO_NO_DEVICE: + identify->device_type = SAS_PHY_UNUSED; + break; + case MPI2_SAS_DEVICE_INFO_END_DEVICE: + identify->device_type = SAS_END_DEVICE; + break; + case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER: + identify->device_type = SAS_EDGE_EXPANDER_DEVICE; + break; + case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER: + identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; + break; + } + + /* initiator_port_protocols */ + if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; + if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_STP; + if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; + if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST) + identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; + + /* target_port_protocols */ + if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SSP; + if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_STP; + if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SMP; + if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + identify->target_port_protocols |= SAS_PROTOCOL_SATA; + + return 0; +} + +/** + * transport_done - internal transport layer callback handler. + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Callback handler when sending internal generated transport cmds. + * The callback index passed is `ioc->transport_cb_idx` + * + * Return nothing. + */ +void +transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t * mpi_reply; + + mpi_reply = base_get_reply_virt_addr(ioc, reply); + if (ioc->transport_cmds.status == MPT2_CMD_NOT_USED) + return; + if (ioc->transport_cmds.smid != smid) + return; + ioc->transport_cmds.status |= MPT2_CMD_COMPLETE; + if (mpi_reply) { + memcpy(ioc->transport_cmds.reply, mpi_reply, + mpi_reply->MsgLength*4); + ioc->transport_cmds.status |= MPT2_CMD_REPLY_VALID; + } + ioc->transport_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->transport_cmds.done); +} + +/* report manufacture request structure */ +struct rep_manu_request{ + u8 smp_frame_type; + u8 function; + u8 reserved; + u8 request_length; +}; + +/* report manufacture reply structure */ +struct rep_manu_reply{ + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x01 */ + u8 function_result; + u8 response_length; + u16 expander_change_count; + u8 reserved0[2]; + u8 sas_format:1; + u8 reserved1:7; + u8 reserved2[3]; + u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN]; + u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN]; + u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN]; + u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN]; + u16 component_id; + u8 component_revision_id; + u8 reserved3; + u8 vendor_specific[8]; +}; + +/** + * transport_expander_report_manufacture - obtain SMP report_manufacture + * @ioc: per adapter object + * @sas_address: expander sas address + * @edev: the sas_expander_device object + * + * Fills in the sas_expander_device object when SMP port is created. + * + * Returns 0 for success, non-zero for failure. + */ +static int +transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc, + u64 sas_address, struct sas_expander_device *edev) +{ + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + struct rep_manu_reply *manufacture_reply; + struct rep_manu_request *manufacture_request; + int rc; + u16 smid; + u32 ioc_state; + unsigned long timeleft; + void *psge; + u32 sgl_flags; + u8 issue_reset = 0; + unsigned long flags; + void *data_out = NULL; + dma_addr_t data_out_dma; + u32 sz; + u64 *sas_address_le; + u16 wait_state_count; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + mutex_lock(&ioc->transport_cmds.mutex); + + if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT2_CMD_PENDING; + + wait_state_count = 0; + ioc_state = base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + if (!(smid = base_get_smid(ioc, ioc->transport_cb_idx))) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + mpi_request = base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + sz = sizeof(struct rep_manu_request) + sizeof(struct rep_manu_reply); + data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma); + + if (!data_out) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + rc = -ENOMEM; + base_free_smid(ioc, smid); + goto out; + } + + manufacture_request = data_out; + manufacture_request->smp_frame_type = 0x40; + manufacture_request->function = 1; + manufacture_request->reserved = 0; + manufacture_request->request_length = 0; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = 0xFF; + sas_address_le = (u64 *)&mpi_request->SASAddress; + *sas_address_le = cpu_to_le64(sas_address); + mpi_request->RequestDataLength = sizeof(struct rep_manu_request); + psge = &mpi_request->SGL; + + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + sizeof(struct rep_manu_request), data_out_dma); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + sizeof(struct rep_manu_reply), data_out_dma + + sizeof(struct rep_manu_request)); + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "report_manufacture - " + "send to sas_addr(0x%016llx)\n", ioc->name, + (unsigned long long)sas_address)); + base_put_smid_default(ioc, smid, 0 /* VF_ID */); + timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, + 10*HZ); + + if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "report_manufacture : timeout\n", + ioc->name); + if (!(ioc->transport_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "report_manufacture - " + "complete\n", ioc->name)); + + if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) { + u8 *tmp; + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "report_manufacture - reply data transfer size(%d)\n", + ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); + + if (le16_to_cpu(mpi_reply->ResponseDataLength) != + sizeof(struct rep_manu_reply)) + goto out; + + manufacture_reply = data_out + sizeof(struct rep_manu_request); + strncpy(edev->vendor_id, manufacture_reply->vendor_id, + SAS_EXPANDER_VENDOR_ID_LEN); + strncpy(edev->product_id, manufacture_reply->product_id, + SAS_EXPANDER_PRODUCT_ID_LEN); + strncpy(edev->product_rev, manufacture_reply->product_rev, + SAS_EXPANDER_PRODUCT_REV_LEN); + edev->level = manufacture_reply->sas_format; + if (manufacture_reply->sas_format) { + strncpy(edev->component_vendor_id, + manufacture_reply->component_vendor_id, + SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); + tmp = (u8 *)&manufacture_reply->component_id; + edev->component_id = tmp[0] << 8 | tmp[1]; + edev->component_revision_id = + manufacture_reply->component_revision_id; + } + } else + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "report_manufacture - no reply\n", ioc->name)); + + issue_host_reset: + if (issue_reset) + base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET); + out: + ioc->transport_cmds.status = MPT2_CMD_NOT_USED; + if (data_out) + pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma); + + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +/** + * transport_port_add - insert port to the list + * @ioc: per adapter object + * @handle: handle of attached device + * @parent_handle: parent handle(either hba or expander) + * Context: This function will acquire ioc->sas_node_lock. + * + * Adding new port object to the sas_node->sas_port_list. + * + * Returns mpt2sas_port. + */ +struct _sas_port * +transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle, u16 parent_handle) +{ + struct _sas_phy *mpt2sas_phy, *next; + struct _sas_port *mpt2sas_port; + unsigned long flags; + struct _sas_node *sas_node; + struct sas_rphy *rphy; + int i; + struct sas_port *port; + + if (!parent_handle) + return NULL; + + mpt2sas_port = kzalloc (sizeof(struct _sas_port), + GFP_KERNEL); + if (!mpt2sas_port) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return NULL; + } + + INIT_LIST_HEAD(&mpt2sas_port->port_list); + INIT_LIST_HEAD(&mpt2sas_port->phy_list); + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_handle(ioc, parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (!sas_node) { + printk(MPT2SAS_ERR_FMT "%s: Could not find parent(0x%04x)!\n", + ioc->name, __func__, parent_handle); + goto out_fail; + } + + mpt2sas_port->handle = parent_handle; + mpt2sas_port->sas_address = sas_node->sas_address; + if ((_transport_set_identify(ioc, handle, + &mpt2sas_port->remote_identify))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + if (mpt2sas_port->remote_identify.device_type == SAS_PHY_UNUSED) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address != + mpt2sas_port->remote_identify.sas_address) + continue; + list_add_tail(&sas_node->phy[i].port_siblings, + &mpt2sas_port->phy_list); + mpt2sas_port->num_phys++; + } + + if (!mpt2sas_port->num_phys) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + port = sas_port_alloc_num(sas_node->parent_dev); + if ((sas_port_add(port))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + list_for_each_entry(mpt2sas_phy, &mpt2sas_port->phy_list, + port_siblings) { + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &port->dev, "add: handle(0x%04x)" + ", sas_addr(0x%016llx), phy(%d)\n", handle, + (unsigned long long) + mpt2sas_port->remote_identify.sas_address, + mpt2sas_phy->phy_id); + sas_port_add_phy(port, mpt2sas_phy->phy); + } + + mpt2sas_port->port = port; + if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE) + rphy = sas_end_device_alloc(port); + else + rphy = sas_expander_alloc(port, + mpt2sas_port->remote_identify.device_type); + + rphy->identify = mpt2sas_port->remote_identify; + if ((sas_rphy_add(rphy))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &rphy->dev, "add: handle(0x%04x), " + "sas_addr(0x%016llx)\n", handle, + (unsigned long long) + mpt2sas_port->remote_identify.sas_address); + mpt2sas_port->rphy = rphy; + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_add_tail(&mpt2sas_port->port_list, &sas_node->sas_port_list); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + /* fill in report manufacture */ + if (mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) + transport_expander_report_manufacture(ioc, + mpt2sas_port->remote_identify.sas_address, + rphy_to_expander_device(rphy)); + + return mpt2sas_port; + + out_fail: + list_for_each_entry_safe(mpt2sas_phy, next, &mpt2sas_port->phy_list, + port_siblings) + list_del(&mpt2sas_phy->port_siblings); + kfree(mpt2sas_port); + return NULL; +} + +/** + * transport_port_remove - remove port from the list + * @ioc: per adapter object + * @sas_address: sas address of attached device + * @parent_handle: handle to the upstream parent(either hba or expander) + * Context: This function will acquire ioc->sas_node_lock. + * + * Removing object and freeing associated memory from the + * ioc->sas_port_list. + * + * Return nothing. + */ +void +transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 parent_handle) +{ + unsigned long flags; + struct _sas_port *mpt2sas_port, *next; + struct _sas_node *sas_node; + u8 found = 0; + struct _sas_phy *mpt2sas_phy, *next_phy; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_handle(ioc, parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!sas_node) + return; + list_for_each_entry_safe(mpt2sas_port, next, &sas_node->sas_port_list, + port_list) { + if (mpt2sas_port->remote_identify.sas_address != sas_address) + continue; + found = 1; + list_del(&mpt2sas_port->port_list); + goto out; + } + out: + if (!found) + return; + + list_for_each_entry_safe(mpt2sas_phy, next_phy, + &mpt2sas_port->phy_list, port_siblings) { + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &mpt2sas_port->port->dev, + "remove: parent_handle(0x%04x), " + "sas_addr(0x%016llx), phy(%d)\n", parent_handle, + (unsigned long long) + mpt2sas_port->remote_identify.sas_address, + mpt2sas_phy->phy_id); + sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy); + list_del(&mpt2sas_phy->port_siblings); + } + sas_port_delete(mpt2sas_port->port); + kfree(mpt2sas_port); +} + +/** + * transport_add_host_phy - report sas_host phy to transport + * @ioc: per adapter object + * @mpt2sas_phy: mpt2sas per phy object + * @phy_pg0: sas phy page 0 + * @parent_dev: parent device class object + * + * Returns 0 for success, non-zero for failure. + */ +int +transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mpt2sas_phy->phy_id; + + + INIT_LIST_HEAD(&mpt2sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + if ((_transport_set_identify(ioc, mpt2sas_phy->handle, + &mpt2sas_phy->identify))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + phy->identify = mpt2sas_phy->identify; + mpt2sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle); + if (mpt2sas_phy->attached_handle) + _transport_set_identify(ioc, mpt2sas_phy->attached_handle, + &mpt2sas_phy->remote_identify); + phy->identify.phy_identifier = mpt2sas_phy->phy_id; + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( + phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( + phy_pg0.HwLinkRate >> 4); + phy->minimum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate >> 4); + + if ((sas_phy_add(phy))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &phy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + mpt2sas_phy->handle, (unsigned long long) + mpt2sas_phy->identify.sas_address, + mpt2sas_phy->attached_handle, + (unsigned long long) + mpt2sas_phy->remote_identify.sas_address); + mpt2sas_phy->phy = phy; + return 0; +} + + +/** + * transport_add_expander_phy - report expander phy to transport + * @ioc: per adapter object + * @mpt2sas_phy: mpt2sas per phy object + * @expander_pg1: expander page 1 + * @parent_dev: parent device class object + * + * Returns 0 for success, non-zero for failure. + */ +int +transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mpt2sas_phy->phy_id; + + INIT_LIST_HEAD(&mpt2sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + if ((_transport_set_identify(ioc, mpt2sas_phy->handle, + &mpt2sas_phy->identify))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + phy->identify = mpt2sas_phy->identify; + mpt2sas_phy->attached_handle = + le16_to_cpu(expander_pg1.AttachedDevHandle); + if (mpt2sas_phy->attached_handle) + _transport_set_identify(ioc, mpt2sas_phy->attached_handle, + &mpt2sas_phy->remote_identify); + phy->identify.phy_identifier = mpt2sas_phy->phy_id; + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + expander_pg1.NegotiatedLinkRate & + MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( + expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( + expander_pg1.HwLinkRate >> 4); + phy->minimum_linkrate = _transport_convert_phy_link_rate( + expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + expander_pg1.ProgrammedLinkRate >> 4); + + if ((sas_phy_add(phy))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &phy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + mpt2sas_phy->handle, (unsigned long long) + mpt2sas_phy->identify.sas_address, + mpt2sas_phy->attached_handle, + (unsigned long long) + mpt2sas_phy->remote_identify.sas_address); + mpt2sas_phy->phy = phy; + return 0; +} + +/** + * transport_update_phy_link_change - refreshing phy link changes and attached devices + * @ioc: per adapter object + * @handle: handle to sas_host or expander + * @attached_handle: attached device handle + * @phy_numberv: phy number + * @link_rate: new link rate + * + * Returns nothing. + */ +void +transport_update_phy_link_change(struct MPT2SAS_ADAPTER *ioc, u16 handle, + u16 attached_handle, u8 phy_number, u8 link_rate) +{ + unsigned long flags; + struct _sas_node *sas_node; + struct _sas_phy *mpt2sas_phy; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!sas_node) + return; + + mpt2sas_phy = &sas_node->phy[phy_number]; + mpt2sas_phy->attached_handle = attached_handle; + if (attached_handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) + _transport_set_identify(ioc, mpt2sas_phy->attached_handle, + &mpt2sas_phy->remote_identify); + else + memset(&mpt2sas_phy->remote_identify, 0 , sizeof(struct + sas_identify)); + + if (mpt2sas_phy->phy) + mpt2sas_phy->phy->negotiated_linkrate = + _transport_convert_phy_link_rate(link_rate); + + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev, + "refresh: handle(0x%04x), sas_addr(0x%016llx),\n" + "\tlink_rate(0x%02x), phy(%d)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + handle, (unsigned long long) + mpt2sas_phy->identify.sas_address, link_rate, + phy_number, attached_handle, + (unsigned long long) + mpt2sas_phy->remote_identify.sas_address); +} + +static inline void * +phy_to_ioc(struct sas_phy *phy) +{ + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + return shost_priv(shost); +} + +static inline void * +rphy_to_ioc(struct sas_rphy *rphy) +{ + struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); + return shost_priv(shost); +} + +/** + * transport_get_linkerrors - + * @phy: The sas phy object + * + * Only support sas_host direct attached phys. + * Returns 0 for success, non-zero for failure. + * + */ +static int +transport_get_linkerrors(struct sas_phy *phy) +{ + struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy); + struct _sas_phy *mpt2sas_phy; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasPhyPage1_t phy_pg1; + int i; + + for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys && + !mpt2sas_phy; i++) { + if (ioc->sas_hba.phy[i].phy != phy) + continue; + mpt2sas_phy = &ioc->sas_hba.phy[i]; + } + + if (!mpt2sas_phy) /* this phy not on sas_host */ + return -EINVAL; + + if ((config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1, + mpt2sas_phy->phy_id))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) + printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status" + "(0x%04x), loginfo(0x%08x)\n", ioc->name, + mpt2sas_phy->phy_id, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo)); + + phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount); + phy->running_disparity_error_count = + le32_to_cpu(phy_pg1.RunningDisparityErrorCount); + phy->loss_of_dword_sync_count = + le32_to_cpu(phy_pg1.LossDwordSynchCount); + phy->phy_reset_problem_count = + le32_to_cpu(phy_pg1.PhyResetProblemCount); + return 0; +} + +/** + * transport_get_enclosure_identifier - + * @phy: The sas phy object + * + * Obtain the enclosure logical id for an expander. + * Returns 0 for success, non-zero for failure. + */ +static int +transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) +{ + struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy); + struct _sas_node *sas_expander; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = scsih_expander_find_by_sas_address(ioc, + rphy->identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (!sas_expander) + return -ENXIO; + + *identifier = sas_expander->enclosure_logical_id; + return 0; +} + +/** + * transport_get_bay_identifier - + * @phy: The sas phy object + * + * Returns the slot id for a device that resides inside an enclosure. + */ +static int +transport_get_bay_identifier(struct sas_rphy *rphy) +{ + struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy); + struct _sas_device *sas_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (!sas_device) + return -ENXIO; + + return sas_device->slot; +} + +/** + * transport_phy_reset - + * @phy: The sas phy object + * @hard_reset: + * + * Only support sas_host direct attached phys. + * Returns 0 for success, non-zero for failure. + */ +static int +transport_phy_reset(struct sas_phy *phy, int hard_reset) +{ + struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy); + struct _sas_phy *mpt2sas_phy; + Mpi2SasIoUnitControlReply_t mpi_reply; + Mpi2SasIoUnitControlRequest_t mpi_request; + int i; + + for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys && + !mpt2sas_phy; i++) { + if (ioc->sas_hba.phy[i].phy != phy) + continue; + mpt2sas_phy = &ioc->sas_hba.phy[i]; + } + + if (!mpt2sas_phy) /* this phy not on sas_host */ + return -EINVAL; + + memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t)); + mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; + mpi_request.Operation = hard_reset ? + MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET; + mpi_request.PhyNum = mpt2sas_phy->phy_id; + + if ((base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) + printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status" + "(0x%04x), loginfo(0x%08x)\n", ioc->name, + mpt2sas_phy->phy_id, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo)); + + return 0; +} + +/** + * transport_smp_handler - transport portal for smp passthru + * @shost: shost object + * @rphy: sas transport rphy object + * @req: + * + * This used primarily for smp_utils. + * Example: + * smp_rep_general /sys/class/bsg/expander-5:0 + */ +static int +transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, + struct request *req) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + int rc; + u16 smid; + u32 ioc_state; + unsigned long timeleft; + void *psge; + u32 sgl_flags; + u8 issue_reset = 0; + unsigned long flags; + dma_addr_t dma_addr_in = 0; + dma_addr_t dma_addr_out = 0; + u16 wait_state_count; + struct request *rsp = req->next_rq; + + if (!rsp) { + printk(MPT2SAS_ERR_FMT "%s: the smp response space is " + "missing\n", ioc->name, __func__); + return -EINVAL; + } + + /* do we need to support multiple segments? */ + if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) { + printk(MPT2SAS_ERR_FMT "%s: multiple segments req %u %u, " + "rsp %u %u\n", ioc->name, __func__, req->bio->bi_vcnt, + req->data_len, rsp->bio->bi_vcnt, rsp->data_len); + return -EINVAL; + } + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex); + if (rc) + return rc; + + if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n", ioc->name, + __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT2_CMD_PENDING; + + wait_state_count = 0; + ioc_state = base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + if (!(smid = base_get_smid(ioc, ioc->transport_cb_idx))) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + mpi_request = base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = 0xFF; + *((u64 *)&mpi_request->SASAddress) = (rphy) ? + cpu_to_le64(rphy->identify.sas_address) : + cpu_to_le64(ioc->sas_hba.sas_address); + mpi_request->RequestDataLength = cpu_to_le16(req->data_len - 4); + psge = &mpi_request->SGL; + + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio), + req->data_len, PCI_DMA_BIDIRECTIONAL); + if (!dma_addr_out) { + base_free_smid(ioc, le16_to_cpu(smid)); + goto unmap; + } + + ioc->base_add_sg_single(psge, sgl_flags | (req->data_len - 4), + dma_addr_out); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio), + rsp->data_len, PCI_DMA_BIDIRECTIONAL); + if (!dma_addr_in) { + base_free_smid(ioc, le16_to_cpu(smid)); + goto unmap; + } + + ioc->base_add_sg_single(psge, sgl_flags | (rsp->data_len + 4), + dma_addr_in); + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - " + "sending smp request\n", ioc->name, __func__)); + + base_put_smid_default(ioc, smid, 0 /* VF_ID */); + timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, + 10*HZ); + + if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s : timeout\n", + __func__, ioc->name); + if (!(ioc->transport_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - " + "complete\n", ioc->name, __func__)); + + if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) { + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s - reply data transfer size(%d)\n", + ioc->name, __func__, + le16_to_cpu(mpi_reply->ResponseDataLength))); + + memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); + req->sense_len = sizeof(*mpi_reply); + req->data_len = 0; + rsp->data_len -= mpi_reply->ResponseDataLength; + + } else { + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s - no reply\n", ioc->name, __func__)); + rc = -ENXIO; + } + + issue_host_reset: + if (issue_reset) { + base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET); + rc = -ETIMEDOUT; + } + + unmap: + if (dma_addr_out) + pci_unmap_single(ioc->pdev, dma_addr_out, req->data_len, + PCI_DMA_BIDIRECTIONAL); + if (dma_addr_in) + pci_unmap_single(ioc->pdev, dma_addr_in, rsp->data_len, + PCI_DMA_BIDIRECTIONAL); + + out: + ioc->transport_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +struct sas_function_template mpt2sas_transport_functions = { + .get_linkerrors = transport_get_linkerrors, + .get_enclosure_identifier = transport_get_enclosure_identifier, + .get_bay_identifier = transport_get_bay_identifier, + .phy_reset = transport_phy_reset, + .smp_handler = transport_smp_handler, +}; + +struct scsi_transport_template *mpt2sas_transport_template; -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
