RE: [dm-devel] i/o error due to all path failure with rdac

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2008-10-30 at 13:17 -0600, Moger, Babu wrote:
> I am running multipath-tools v0.4.8 (I just pulled from mainstream last week) and kernel version 2.6.27-rc7.
> 
> I am not seeing "queueing MODE_SELECT command", because this is online/offline test.  When you offline 
> the controller the luns are automatically transferred to alt controller.

No, moving the luns to the other controller is done by the rdac hardware
handler by way of sending a MODE_SELECT to the controller.

So, we should be seeing a MODE_SELECT to the passive controller.

> 
> Thanks
> Babu Moger
> 
> -----Original Message-----
> From: dm-devel-bounces@xxxxxxxxxx [mailto:dm-devel-bounces@xxxxxxxxxx] On Behalf Of Mike Anderson
> Sent: Thursday, October 30, 2008 12:35 PM
> To: device-mapper development; Chandra Seetharaman
> Cc: linux-scsi@xxxxxxxxxxxxxxx
> Subject: Re: [dm-devel] i/o error due to all path failure with rdac
> 
> Moger, Babu <Babu.Moger@xxxxxxx> wrote:
> >
> > Hi,
> >
> >   I am running an online/offline test. I have two paths to the controller. One is active and one is passive. When I fail (offline) the active path (sde 8:64), the Device mapper is failing passive path(sdf 8:80) as well leading to all path failure.  Any ideas or hints?
> >
> 
> What version of multipath tools and kernel are you running? If this is a
> newer kernel I would have expected to see "queueing MODE_SELECT command"
> during failover.
> 
> > Here is output multipath -ll. I have only one lun.
> >
> > [root@localhost ~]# multipath -ll
> > mpathie (3600a0b80000f6a7d0000cff048fed59c) dm-2 LSI,INF-01-00
> > [size=10G][features=1 queue_if_no_path][hwhandler=1 rdac][rw]
> > \_ round-robin 0 [prio=2][enabled]
> >  \_ 3:0:0:0 sde 8:64  [active][undef]
> > \_ round-robin 0 [prio=1][enabled]
> >  \_ 3:0:1:0 sdf 8:80  [active][undef]
> >
> >
> > Here is the detailed log.
> >
> > Oct 24 16:50:50 localhost multipathd: sdf: rdac prio = 0
> > Oct 24 16:51:06 localhost kernel: sd 3:0:0:0: [sde] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK
> > Oct 24 16:51:06 localhost kernel: end_request: I/O error, dev sde, sector 1047072
> > Oct 24 16:51:06 localhost kernel: device-mapper: multipath: Failing path 8:64.
> > Oct 24 16:51:06 localhost multipathd: mpathie: rr_weight = 2 (controller setting)
> > Oct 24 16:51:06 localhost multipathd: mpathie: pgfailback = 100 (controller setting)
> > Oct 24 16:51:06 localhost multipathd: mpathie: no_path_retry = 10 (controller setting)
> > Oct 24 16:51:06 localhost multipathd: pg_timeout = NONE (internal default)
> > Oct 24 16:51:06 localhost multipathd: 8:64: mark as failed
> > Oct 24 16:51:06 localhost multipathd: uevent 'change' from '/block/dm-2'
> > Oct 24 16:51:06 localhost multipathd: UDEV_LOG=3
> > Oct 24 16:51:06 localhost multipathd: ACTION=change
> > Oct 24 16:51:06 localhost multipathd: DEVPATH=/block/dm-2
> > Oct 24 16:51:06 localhost multipathd: SUBSYSTEM=block
> > Oct 24 16:51:06 localhost multipathd: DM_TARGET=multipath
> > Oct 24 16:51:06 localhost multipathd: DM_ACTION=PATH_FAILED
> > Oct 24 16:51:06 localhost multipathd: DM_SEQNUM=1
> > Oct 24 16:51:06 localhost multipathd: DM_PATH=8:64
> > Oct 24 16:51:06 localhost multipathd: DM_NR_VALID_PATHS=1
> > Oct 24 16:51:06 localhost multipathd: DM_NAME=mpathie
> > Oct 24 16:51:06 localhost multipathd: DM_UUID=mpath-3600a0b80000f6a7d0000cff048fed59c
> > Oct 24 16:51:06 localhost multipathd: MAJOR=253
> > Oct 24 16:51:06 localhost multipathd: MINOR=2
> > Oct 24 16:51:06 localhost multipathd: DEVTYPE=disk
> > Oct 24 16:51:06 localhost multipathd: SEQNUM=1254
> > Oct 24 16:51:06 localhost multipathd: UDEVD_EVENT=1
> > Oct 24 16:51:06 localhost multipathd: dm-2: add map (uevent)
> > Oct 24 16:51:08 localhost kernel: device-mapper: multipath: Failing path 8:80.
> > Oct 24 16:51:08 localhost multipathd: mpathie: devmap event #3
> > Oct 24 16:51:08 localhost multipathd: mpathie: discover
> > Oct 24 16:51:08 localhost multipathd: mpathie: rr_weight = 2 (controller setting)
> > Oct 24 16:51:08 localhost multipathd: mpathie: pgfailback = 100 (controller setting)
> > Oct 24 16:51:08 localhost multipathd: mpathie: no_path_retry = 10 (controller setting)
> > Oct 24 16:51:08 localhost multipathd: pg_timeout = NONE (internal default)
> > Oct 24 16:51:08 localhost multipathd: 8:80: mark as failed
> > Oct 24 16:51:08 localhost multipathd: mpathie: Entering recovery mode: max_retries=10
> > Oct 24 16:51:08 localhost multipathd: uevent 'change' from '/block/dm-2'
> > Oct 24 16:51:08 localhost multipathd: UDEV_LOG=3
> > Oct 24 16:51:08 localhost multipathd: ACTION=change
> > Oct 24 16:51:08 localhost multipathd: DEVPATH=/block/dm-2
> > Oct 24 16:51:08 localhost multipathd: SUBSYSTEM=block
> > Oct 24 16:51:08 localhost multipathd: DM_TARGET=multipath
> > Oct 24 16:51:08 localhost multipathd: DM_ACTION=PATH_FAILED
> > Oct 24 16:51:08 localhost multipathd: DM_SEQNUM=2
> > Oct 24 16:51:08 localhost multipathd: DM_PATH=8:80
> > Oct 24 16:51:08 localhost multipathd: DM_NR_VALID_PATHS=0
> > Oct 24 16:51:08 localhost multipathd: DM_NAME=mpathie
> > Oct 24 16:51:08 localhost multipathd: DM_UUID=mpath-3600a0b80000f6a7d0000cff048fed59c
> > Oct 24 16:51:08 localhost multipathd: MAJOR=253
> > Oct 24 16:51:08 localhost multipathd: MINOR=2
> > Oct 24 16:51:08 localhost multipathd: DEVTYPE=disk
> > Oct 24 16:51:08 localhost multipathd: SEQNUM=1255
> > Oct 24 16:51:08 localhost multipathd: UDEVD_EVENT=1
> > Oct 24 16:51:08 localhost multipathd: dm-2: add map (uevent)
> > Oct 24 16:51:36 localhost kernel:  rport-3:0-2: blocked FC remote port time out: removing target and saving binding
> > Oct 24 16:51:36 localhost multipathd: sde: rdac checker reports path is down
> > Oct 24 16:51:36 localhost multipathd: sde: mask = 0x8
> > Oct 24 16:51:36 localhost kernel: sd 3:0:0:0: [sde] Synchronizing SCSI cache
> > Oct 24 16:51:36 localhost kernel: sd 3:0:0:0: [sde] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> > Oct 24 16:51:36 localhost kernel: scsi 3:0:0:0: rdac: Detached
> > Oct 24 16:51:36 localhost multipathd: uevent 'remove' from '/class/scsi_generic/sg5'
> > Oct 24 16:51:36 localhost multipathd: UDEV_LOG=3
> > Oct 24 16:51:36 localhost multipathd: ACTION=remove
> > Oct 24 16:51:36 localhost multipathd: DEVPATH=/class/scsi_generic/sg5
> > Oct 24 16:51:36 localhost multipathd: SUBSYSTEM=scsi_generic
> > Oct 24 16:51:36 localhost multipathd: MAJOR=21
> > Oct 24 16:51:36 localhost multipathd: MINOR=5
> > Oct 24 16:51:36 localhost multipathd: PHYSDEVPATH=/devices/pci0000:00/0000:00:02.0/0000:06:00.3/0000:0b:01.0/host3/rport-3:0-2/target3:0:0/3:0:0:0
> > Oct 24 16:51:36 localhost multipathd: PHYSDEVBUS=scsi
> > Oct 24 16:51:36 localhost multipathd: PHYSDEVDRIVER=sd
> > Oct 24 16:51:36 localhost multipathd: SEQNUM=1256
> > Oct 24 16:51:36 localhost multipathd: UDEVD_EVENT=1
> > Oct 24 16:51:36 localhost multipathd: DEVNAME=/dev/sg5
> > Oct 24 16:51:36 localhost multipathd: uevent 'remove' from '/class/scsi_device/3:0:0:0'
> > Oct 24 16:51:36 localhost multipathd: UDEV_LOG=3
> > Oct 24 16:51:36 localhost kernel: device-mapper: multipath: Failing path 8:80.
> > Oct 24 16:51:36 localhost multipathd: ACTION=remove
> > Oct 24 16:51:36 localhost UnixSmash4[9200]: 7:UnixSmash has experienced a write failure.
> >
> > Thanks
> > Babu Moger
> >
> >
> > --
> > dm-devel mailing list
> > dm-devel@xxxxxxxxxx
> > https://www.redhat.com/mailman/listinfo/dm-devel
> 
> -andmike
> --
> Michael Anderson
> andmike@xxxxxxxxxxxxxxxxxx
> 
> --
> dm-devel mailing list
> dm-devel@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/dm-devel
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux