New panic output is attached after adding softlockup. New found: 1, "strace mke2fs /dev/sdb1" works well. it just show many write(3, "\377\377...", 4096) =4096 .... 2, when system hang, ping this machine is workable. And keyboard input works but cmd has no output. BRG Alex -----Original Message----- From: Andrew Morton [mailto:akpm@xxxxxxxxxxxxxxxxxxxx] Sent: 2008年10月30日 16:54 To: Shi, Alex Cc: bugme-daemon@xxxxxxxxxxxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx Subject: Re: [Bugme-new] [Bug 11898] New: mke2fs hang on AIC79 device. (switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). On Thu, 30 Oct 2008 01:17:37 -0700 (PDT) bugme-daemon@xxxxxxxxxxxxxxxxxxx wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=11898 > > Summary: mke2fs hang on AIC79 device. > Product: IO/Storage > Version: 2.5 > KernelVersion: 2.6.28-rc1/rc2 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: blocking > Priority: P1 > Component: SCSI > AssignedTo: linux-scsi@xxxxxxxxxxxxxxx > ReportedBy: alex.shi@xxxxxxxxx > > > Latest working kernel version:2.6.27 > Earliest failing kernel version:2.6.28-rc1 > Distribution:RHEL 4.91 > Hardware Environment:AIC79xx > Software Environment: > Problem Description: > > Steps to reproduce: mke2fs /dev/sdx > > > [root@linux-b03 ~]# mke2fs /dev/sdb1 > mke2fs 1.39 (29-May-2006) > Filesystem label= > OS type: Linux > Block size=4096 (log=2) > Fragment size=4096 (log=2) > 3842720 inodes, 7679996 blocks > 383999 blocks (5.00%) reserved for the super user > First data block=0 > Maximum filesystem blocks=4294967296 > 235 block groups > 32768 blocks per group, 32768 fragments per group > 16352 inodes per group > Superblock backups stored on blocks: > 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, > 4096000 > > Writing inode tables: done > Writing superblocks and filesystem accounting information: > > ..... hang .... Can you please work out where it hung? Enable the softlockup detector, nmi watchdog, try to get a sysrq-w or sysrq-t trace, etc? Thanks. > lspci : > > > 04:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) > Subsystem: Super Micro Computer Inc Unknown device 8080 > Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 16 > I/O ports at 2400 [disabled] [size=256] > Memory at c8200000 (64-bit, non-prefetchable) [size=8K] > I/O ports at 2000 [disabled] [size=256] > [virtual] Expansion ROM at c2000000 [disabled] [size=512K] > Capabilities: <access denied> > > 04:02.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) > Subsystem: Super Micro Computer Inc Unknown device 8080 > Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17 > I/O ports at 2c00 [disabled] [size=256] > Memory at c8202000 (64-bit, non-prefetchable) [size=8K] > I/O ports at 2800 [disabled] [size=256] > [virtual] Expansion ROM at c2080000 [disabled] [size=512K] > Capabilities: <access denied> > > dmesg: > > 8D0, 0014 (r0 PTLTD ) > ACPI: RSDT BFF631DD, 003C (r1 PTLTD RSDT 6040000 LTP 0) > ACPI: FACP BFF68E10, 0074 (r1 INTEL TUMWATER 6040000 PTL 3) > ACPI: DSDT BFF64ACF, 4341 (r1 Intel BLAKFORD 6040000 MSFT 100000E) > ACPI: FACS BFF69FC0, 0040 > ACPI: APIC BFF68E84, 00C8 (r1 PTLTD APIC 6040000 LTP 0) > ACPI: MCFG BFF68F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) > ACPI: BOOT BFF68F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) > ACPI: SPCR BFF68FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) > ACPI: SSDT BFF63219, 13EC (r1 PmRef CpuPm 3000 INTL 20050228) > ACPI: Local APIC address 0xfee00000 > (7 early reservations) ==> bootmem [0000000000 - 0140000000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > #2 [0000200000 - 00006cabc8] TEXT DATA BSS ==> [0000200000 - 00006cabc8] > #3 [0037eba000 - 0037fefe92] RAMDISK ==> [0037eba000 - 0037fefe92] > #4 [000009c800 - 0000100000] BIOS reserved ==> [000009c800 - 0000100000] > #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] > #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] > found SMP MP-table at [ffff8800000f5900] 000f5900 > [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] > on node 0 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00140000 > Movable zone start PFN for each node > early_node_map[3] active PFN ranges > 0: 0x00000000 -> 0x0000009c > 0: 0x00000100 -> 0x000bff60 > 0: 0x00100000 -> 0x00140000 > On node 0 totalpages: 1048316 > DMA zone: 56 pages used for memmap > DMA zone: 1334 pages reserved > DMA zone: 2606 pages, LIFO batch:0 > DMA32 zone: 14280 pages used for memmap > DMA32 zone: 767896 pages, LIFO batch:31 > Normal zone: 3584 pages used for memmap > Normal zone: 258560 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) > IOAPIC[1]: apic_id 9, version 0, address 0xfec80000, GSI 24-47 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Using ACPI (MADT) for SMP configuration information > SMP: Allowing 8 CPUs, 0 hotplug CPUs > Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) > PERCPU: Allocating 45056 bytes of per cpu data > NR_CPUS: 8, nr_cpu_ids: 8, nr_node_ids 1 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029062 > Kernel command line: ro root=LABEL=/1 profile=2 console=ttyS0,38400 > kernel profiling enabled (shift: 2) > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Fast TSC calibration using PIT > Detected 2400.210 MHz processor. > Console: colour VGA+ 80x25 > console [ttyS0] enabled > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Checking aperture... > No AGP bridge found > Calgary: detecting Calgary via BIOS EBDA area > Calgary: Unable to locate Rio Grande table in EBDA - bailing! > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > Placing software IO TLB between 0x20000000 - 0x24000000 > Memory: 4039052k/5242880k available (2745k kernel code, 153224k reserved, 1353k > data, 328k init) > Calibrating delay loop (skipped), value calculated using timer frequency.. > 4800.42 BogoMIPS (lpj=9600840) > Mount-cache hash table entries: 256 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU0: Thermal monitoring handled by SMI > using mwait in idle threads. > ACPI: Core revision 20080926 > Parsing all Control Methods: > Table [DSDT](id 0001) - 421 Objects with 47 Devices 131 Methods 22 Regions > Parsing all Control Methods: > Table [SSDT](id 0002) - 43 Objects with 0 Devices 16 Methods 0 Regions > tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired > evxfevnt-0091 [00] enable : Transition to ACPI mode successful > Setting APIC routing to flat > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel(R) Xeon(R) CPU X5340 @ 2.40GHz stepping 07 > Booting processor 1 APIC 0x4 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 4800.39 BogoMIPS (lpj=9600793) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 0 > CPU1: Thermal monitoring enabled (TM2) > CPU1: Intel(R) Xeon(R) CPU X5340 @ 2.40GHz stepping 07 > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > Booting processor 2 APIC 0x1 ip 0x6000 > Initializing CPU#2 > Calibrating delay using timer specific routine.. 4800.39 BogoMIPS (lpj=9600792) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU2: Thermal monitoring enabled (TM2) > CPU2: Intel(R) Xeon(R) CPU X5340 @ 2.40GHz stepping 07 > checking TSC synchronization [CPU#0 -> CPU#2]: passed. > Booting processor 3 APIC 0x5 ip 0x6000 > Initializing CPU#3 > Calibrating delay using timer specific routine.. 4800.39 BogoMIPS (lpj=9600792) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 1 > CPU3: Thermal monitoring enabled (TM2) > CPU3: Intel(R) Xeon(R) CPU X5340 @ 2.40GHz stepping 07 > checking TSC synchronization [CPU#0 -> CPU#3]: passed. > Booting processor 4 APIC 0x2 ip 0x6000 > Initializing CPU#4 > Calibrating delay using timer specific routine.. 4800.36 BogoMIPS (lpj=9600737) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 2 > CPU4: Thermal monitoring enabled (TM2) > CPU4: Intel(R) Xeon(R) CPU X5340 @ 2.40GHz stepping 07 > checking TSC synchronization [CPU#0 -> CPU#4]: passed. > Booting processor 5 APIC 0x6 ip 0x6000 > Initializing CPU#5 > Calibrating delay using timer specific routine.. 4800.39 BogoMIPS (lpj=9600791) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 2 > CPU5: Thermal monitoring enabled (TM2) > CPU5: Intel(R) Xeon(R) CPU X5340 @ 2.40GHz stepping 07 > checking TSC synchronization [CPU#0 -> CPU#5]: passed. > Booting processor 6 APIC 0x3 ip 0x6000 > Initializing CPU#6 > Calibrating delay using timer specific routine.. 4800.36 BogoMIPS (lpj=9600728) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 3 > CPU6: Thermal monitoring enabled (TM2) > CPU6: Intel(R) Xeon(R) CPU X5340 @ 2.40GHz stepping 07 > checking TSC synchronization [CPU#0 -> CPU#6]: passed. > Booting processor 7 APIC 0x7 ip 0x6000 > Initializing CPU#7 > Calibrating delay using timer specific routine.. 4801.13 BogoMIPS (lpj=9602264) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 1 > CPU: Processor Core ID: 3 > CPU7: Thermal monitoring enabled (TM2) > CPU7: Intel(R) Xeon(R) CPU X5340 @ 2.40GHz stepping 07 > checking TSC synchronization [CPU#0 -> CPU#7]: passed. > Brought up 8 CPUs > Total of 8 processors activated (38403.86 BogoMIPS). > net_namespace: 888 bytes > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 10 > PCI: MCFG area at e0000000 reserved in E820 > PCI: Using MMCONFIG at e0000000 - e0afffff > PCI: Using configuration type 1 for base access > evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int > 0x9 > ACPI: EC: Look up EC in DSDT > Completing Region/Field/Buffer/Package > initialization:......................................................................... > Initialized 17/22 Regions 0/0 Fields 35/35 Buffers 21/21 Packages (473 nodes) > Initializing Device/Processor/Thermal objects by executing _INI methods:. > Executed 1 _INI methods requiring 0 _STA executions (examined 57 objects) > evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 0 Runtime GPEs > in this block > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:00.0: PME# supported from D0 D3hot D3cold > pci 0000:00:00.0: PME# disabled > pci 0000:00:02.0: PME# supported from D0 D3hot D3cold > pci 0000:00:02.0: PME# disabled > pci 0000:00:04.0: PME# supported from D0 D3hot D3cold > pci 0000:00:04.0: PME# disabled > pci 0000:00:06.0: PME# supported from D0 D3hot D3cold > pci 0000:00:06.0: PME# disabled > pci 0000:00:08.0: reg 10 64bit mmio: [0xfe700000-0xfe7003ff] > pci 0000:00:08.0: PME# supported from D0 D3hot D3cold > pci 0000:00:08.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] > pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] > pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] > pci 0000:00:1d.7: reg 10 32bit mmio: [0xc8000000-0xc80003ff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 > pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] > pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] > pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] > pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] > pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f] > pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f] > pci 0000:01:00.0: PME# supported from D0 D3hot D3cold > pci 0000:01:00.0: PME# disabled > pci 0000:01:00.3: PME# supported from D0 D3hot D3cold > pci 0000:01:00.3: PME# disabled > pci 0000:00:02.0: bridge io port: [0x2000-0x3fff] > pci 0000:00:02.0: bridge 32bit mmio: [0xc8100000-0xc83fffff] > pci 0000:02:00.0: PME# supported from D0 D3hot D3cold > pci 0000:02:00.0: PME# disabled > pci 0000:02:02.0: PME# supported from D0 D3hot D3cold > pci 0000:02:02.0: PME# disabled > pci 0000:01:00.0: bridge io port: [0x2000-0x3fff] > pci 0000:01:00.0: bridge 32bit mmio: [0xc8200000-0xc83fffff] > pci 0000:03:00.0: PXH quirk detected; SHPC device MSI disabled > pci 0000:03:00.0: PME# supported from D0 D3hot D3cold > pci 0000:03:00.0: PME# disabled > pci 0000:03:00.2: PXH quirk detected; SHPC device MSI disabled > pci 0000:03:00.2: PME# supported from D0 D3hot D3cold > pci 0000:03:00.2: PME# disabled > pci 0000:02:00.0: bridge io port: [0x2000-0x2fff] > pci 0000:02:00.0: bridge 32bit mmio: [0xc8200000-0xc82fffff] > pci 0000:04:02.0: reg 10 io port: [0x2400-0x24ff] > pci 0000:04:02.0: reg 14 64bit mmio: [0xc8200000-0xc8201fff] > pci 0000:04:02.0: reg 1c io port: [0x2000-0x20ff] > pci 0000:04:02.0: reg 30 32bit mmio: [0x000000-0x07ffff] > pci 0000:04:02.1: reg 10 io port: [0x2c00-0x2cff] > pci 0000:04:02.1: reg 14 64bit mmio: [0xc8202000-0xc8203fff] > pci 0000:04:02.1: reg 1c io port: [0x2800-0x28ff] > pci 0000:04:02.1: reg 30 32bit mmio: [0x000000-0x07ffff] > pci 0000:03:00.0: bridge io port: [0x2000-0x2fff] > pci 0000:03:00.0: bridge 32bit mmio: [0xc8200000-0xc82fffff] > pci 0000:06:00.0: reg 10 32bit mmio: [0xc8320000-0xc833ffff] > pci 0000:06:00.0: reg 14 32bit mmio: [0xc8300000-0xc831ffff] > pci 0000:06:00.0: reg 18 io port: [0x3000-0x301f] > pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] > pci 0000:06:00.0: PME# supported from D0 D3hot D3cold > pci 0000:06:00.0: PME# disabled > pci 0000:06:00.1: reg 10 32bit mmio: [0xc8360000-0xc837ffff] > pci 0000:06:00.1: reg 14 32bit mmio: [0xc8340000-0xc835ffff] > pci 0000:06:00.1: reg 18 io port: [0x3020-0x303f] > pci 0000:06:00.1: reg 30 32bit mmio: [0x000000-0x00ffff] > pci 0000:06:00.1: PME# supported from D0 D3hot D3cold > pci 0000:06:00.1: PME# disabled > pci 0000:02:02.0: bridge io port: [0x3000-0x3fff] > pci 0000:02:02.0: bridge 32bit mmio: [0xc8300000-0xc83fffff] > pci 0000:0b:01.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] > pci 0000:0b:01.0: reg 14 io port: [0x4000-0x40ff] > pci 0000:0b:01.0: reg 18 32bit mmio: [0xc8400000-0xc840ffff] > pci 0000:0b:01.0: reg 30 32bit mmio: [0x000000-0x01ffff] > pci 0000:0b:01.0: supports D1 D2 > pci 0000:00:1e.0: transparent bridge > pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff] > pci 0000:00:1e.0: bridge 32bit mmio: [0xc8400000-0xc84fffff] > pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff] > bus 00 -> node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0.PXH0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0.PXH1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD2._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMF3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9 > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. > SCSI subsystem initialized > PCI: Using ACPI for IRQ routing > PCI-GART: No AMD northbridge found. > hpet clockevent registered > HPET: 3 timers in total, 0 timers will be used for per-cpu timer > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 comparators, 64-bit 14.318180 MHz counter > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > system 00:01: ioport range 0x4d0-0x4d1 has been reserved > system 00:01: ioport range 0x295-0x296 has been reserved > system 00:01: ioport range 0xca2-0xca3 has been reserved > system 00:01: ioport range 0xca8-0xcaf has been reserved > system 00:01: ioport range 0x1000-0x107f has been reserved > system 00:01: ioport range 0x1180-0x11bf has been reserved > system 00:01: ioport range 0x800-0x80f has been reserved > system 00:01: ioport range 0xfe00-0xfe00 has been reserved > system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved > system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved > system 00:01: iomem range 0xfec80000-0xfec80fff has been reserved > system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved > system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved > pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 > pci 0000:03:00.0: IO window: 0x2000-0x2fff > pci 0000:03:00.0: MEM window: 0xc8200000-0xc82fffff > pci 0000:03:00.0: PREFETCH window: 0x000000c2000000-0x000000c20fffff > pci 0000:03:00.2: PCI bridge, secondary bus 0000:05 > pci 0000:03:00.2: IO window: disabled > pci 0000:03:00.2: MEM window: disabled > pci 0000:03:00.2: PREFETCH window: disabled > pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 > pci 0000:02:00.0: IO window: 0x2000-0x2fff > pci 0000:02:00.0: MEM window: 0xc8200000-0xc82fffff > pci 0000:02:00.0: PREFETCH window: 0x000000c2000000-0x000000c20fffff > pci 0000:02:02.0: PCI bridge, secondary bus 0000:06 > pci 0000:02:02.0: IO window: 0x3000-0x3fff > pci 0000:02:02.0: MEM window: 0xc8300000-0xc83fffff > pci 0000:02:02.0: PREFETCH window: 0x000000c2100000-0x000000c21fffff > pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 > pci 0000:01:00.0: IO window: 0x2000-0x3fff > pci 0000:01:00.0: MEM window: 0xc8200000-0xc83fffff > pci 0000:01:00.0: PREFETCH window: 0x000000c2000000-0x000000c21fffff > pci 0000:01:00.3: PCI bridge, secondary bus 0000:07 > pci 0000:01:00.3: IO window: disabled > pci 0000:01:00.3: MEM window: disabled > pci 0000:01:00.3: PREFETCH window: disabled > pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:02.0: IO window: 0x2000-0x3fff > pci 0000:00:02.0: MEM window: 0xc8100000-0xc83fffff > pci 0000:00:02.0: PREFETCH window: 0x000000c2000000-0x000000c21fffff > pci 0000:00:04.0: PCI bridge, secondary bus 0000:08 > pci 0000:00:04.0: IO window: disabled > pci 0000:00:04.0: MEM window: disabled > pci 0000:00:04.0: PREFETCH window: disabled > pci 0000:00:06.0: PCI bridge, secondary bus 0000:09 > pci 0000:00:06.0: IO window: disabled > pci 0000:00:06.0: MEM window: disabled > pci 0000:00:06.0: PREFETCH window: disabled > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0a > pci 0000:00:1c.0: IO window: disabled > pci 0000:00:1c.0: MEM window: disabled > pci 0000:00:1c.0: PREFETCH window: disabled > pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b > pci 0000:00:1e.0: IO window: 0x4000-0x4fff > pci 0000:00:1e.0: MEM window: 0xc8400000-0xc84fffff > pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff > pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:02.0: setting latency timer to 64 > pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:01:00.0: setting latency timer to 64 > pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:02:00.0: setting latency timer to 64 > pci 0000:03:00.0: setting latency timer to 64 > pci 0000:03:00.2: setting latency timer to 64 > pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > pci 0000:02:02.0: setting latency timer to 64 > pci 0000:01:00.3: setting latency timer to 64 > pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:04.0: setting latency timer to 64 > pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:06.0: setting latency timer to 64 > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1e.0: setting latency timer to 64 > bus: 00 index 0 io port: [0x00-0xffff] > bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] > bus: 01 index 0 io port: [0x2000-0x3fff] > bus: 01 index 1 mmio: [0xc8100000-0xc83fffff] > bus: 01 index 2 mmio: [0xc2000000-0xc21fffff] > bus: 01 index 3 mmio: [0x0-0x0] > bus: 02 index 0 io port: [0x2000-0x3fff] > bus: 02 index 1 mmio: [0xc8200000-0xc83fffff] > bus: 02 index 2 mmio: [0xc2000000-0xc21fffff] > bus: 02 index 3 mmio: [0x0-0x0] > bus: 03 index 0 io port: [0x2000-0x2fff] > bus: 03 index 1 mmio: [0xc8200000-0xc82fffff] > bus: 03 index 2 mmio: [0xc2000000-0xc20fffff] > bus: 03 index 3 mmio: [0x0-0x0] > bus: 04 index 0 io port: [0x2000-0x2fff] > bus: 04 index 1 mmio: [0xc8200000-0xc82fffff] > bus: 04 index 2 mmio: [0xc2000000-0xc20fffff] > bus: 04 index 3 mmio: [0x0-0x0] > bus: 05 index 0 mmio: [0x0-0x0] > bus: 05 index 1 mmio: [0x0-0x0] > bus: 05 index 2 mmio: [0x0-0x0] > bus: 05 index 3 mmio: [0x0-0x0] > bus: 06 index 0 io port: [0x3000-0x3fff] > bus: 06 index 1 mmio: [0xc8300000-0xc83fffff] > bus: 06 index 2 mmio: [0xc2100000-0xc21fffff] > bus: 06 index 3 mmio: [0x0-0x0] > bus: 07 index 0 mmio: [0x0-0x0] > bus: 07 index 1 mmio: [0x0-0x0] > bus: 07 index 2 mmio: [0x0-0x0] > bus: 07 index 3 mmio: [0x0-0x0] > bus: 08 index 0 mmio: [0x0-0x0] > bus: 08 index 1 mmio: [0x0-0x0] > bus: 08 index 2 mmio: [0x0-0x0] > bus: 08 index 3 mmio: [0x0-0x0] > bus: 09 index 0 mmio: [0x0-0x0] > bus: 09 index 1 mmio: [0x0-0x0] > bus: 09 index 2 mmio: [0x0-0x0] > bus: 09 index 3 mmio: [0x0-0x0] > bus: 0a index 0 mmio: [0x0-0x0] > bus: 0a index 1 mmio: [0x0-0x0] > bus: 0a index 2 mmio: [0x0-0x0] > bus: 0a index 3 mmio: [0x0-0x0] > bus: 0b index 0 io port: [0x4000-0x4fff] > bus: 0b index 1 mmio: [0xc8400000-0xc84fffff] > bus: 0b index 2 mmio: [0xd0000000-0xd7ffffff] > bus: 0b index 3 io port: [0x00-0xffff] > bus: 0b index 4 mmio: [0x000000-0xffffffffffffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > checking if image is initramfs... it is > Freeing initrd memory: 1239k freed > Simple Boot Flag at 0x38 set to 0x1 > HugeTLB registered 2 MB page size, pre-allocated 0 pages > Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). > msgmni has been set to 7893 > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > pci 0000:0b:01.0: Boot video device > input: Power Button (FF) as /class/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /class/input/input1 > ACPI: Power Button (CM) [PWRB] > ACPI: SSDT BFF64605, 0200 (r1 PmRef Cpu0Ist 3000 INTL 20050228) > Parsing all Control Methods: > Table [SSDT](id 00C6) - 5 Objects with 0 Devices 2 Methods 0 Regions > processor ACPI0007:00: registered as cooling_device0 > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI: SSDT BFF64805, 0066 (r1 PmRef Cpu1Ist 3000 INTL 20050228) > Parsing all Control Methods: > Table [SSDT](id 00C9) - 3 Objects with 0 Devices 2 Methods 0 Regions > processor ACPI0007:01: registered as cooling_device1 > ACPI: Processor [CPU1] (supports 8 throttling states) > ACPI: SSDT BFF6486B, 0066 (r1 PmRef Cpu2Ist 3000 INTL 20050228) > Parsing all Control Methods: > Table [SSDT](id 00CC) - 3 Objects with 0 Devices 2 Methods 0 Regions > processor ACPI0007:02: registered as cooling_device2 > ACPI: Processor [CPU2] (supports 8 throttling states) > ACPI: SSDT BFF648D1, 0066 (r1 PmRef Cpu3Ist 3000 INTL 20050228) > Parsing all Control Methods: > Table [SSDT](id 00CF) - 3 Objects with 0 Devices 2 Methods 0 Regions > processor ACPI0007:03: registered as cooling_device3 > ACPI: Processor [CPU3] (supports 8 throttling states) > ACPI: SSDT BFF64937, 0066 (r1 PmRef CPU4Ist 3000 INTL 20050228) > Parsing all Control Methods: > Table [SSDT](id 00D2) - 3 Objects with 0 Devices 2 Methods 0 Regions > processor ACPI0007:04: registered as cooling_device4 > ACPI: Processor [CPU4] (supports 8 throttling states) > ACPI: SSDT BFF6499D, 0066 (r1 PmRef CPU5Ist 3000 INTL 20050228) > Parsing all Control Methods: > Table [SSDT](id 00D5) - 3 Objects with 0 Devices 2 Methods 0 Regions > processor ACPI0007:05: registered as cooling_device5 > ACPI: Processor [CPU5] (supports 8 throttling states) > ACPI: SSDT BFF64A03, 0066 (r1 PmRef Cpu6Ist 3000 INTL 20050228) > Parsing all Control Methods: > Table [SSDT](id 00D8) - 3 Objects with 0 Devices 2 Methods 0 Regions > processor ACPI0007:06: registered as cooling_device6 > ACPI: Processor [CPU6] (supports 8 throttling states) > ACPI: SSDT BFF64A69, 0066 (r1 PmRef Cpu7Ist 3000 INTL 20050228) > Parsing all Control Methods: > Table [SSDT](id 00DB) - 3 Objects with 0 Devices 2 Methods 0 Regions > processor ACPI0007:07: registered as cooling_device7 > ACPI: Processor [CPU7] (supports 8 throttling states) > Real Time Clock Driver v1.12ac > intel_rng: FWH not detected > Linux agpgart interface v0.103 > Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 > seconds). > Hangcheck: Using get_cycles(). > Serial: 8250/16550 driver4 ports, IRQ sharing disabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > brd: module loaded > loop: module loaded > Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI > Copyright (c) 1999-2006 Intel Corporation. > console [netcon0] enabled > netconsole: network logging started > Uniform Multi-Platform E-IDE driver > piix 0000:00:1f.1: IDE controller (0x8086:0x269e rev 0x09) > pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > piix 0000:00:1f.1: IDE port disabled > piix 0000:00:1f.1: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x1860-0x1867 > Probing IDE interface ide0... > hdb: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive > hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hdb: UDMA/44 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide_generic: please use "probe_mask=0x3f" module parameter for probing all > legacy ISA IDE ports > ide-gd driver 1.18 > ide-cd driver 5.00 > ide-cd: hdb: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache > Uniform CD-ROM driver Revision: 3.20 > aic79xx 0000:04:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 > <Adaptec AIC7902 Ultra320 SCSI adapter> > aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100MHz, 512 SCBs > scsi 0:0:6:0: Direct-Access HITACHI HUS103073FL3800 SA1B PQ: 0 ANSI: 3 > target0:0:6: asynchronous > scsi0:A:6:0: Tagged Queuing enabled. Depth 32 > target0:0:6: Beginning Domain Validation > target0:0:6: wide asynchronous > target0:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP > (6.25 ns, offset 80) > target0:0:6: Ending Domain Validation > scsi 0:0:8:0: Processor SUPER GEM359 REV001 1.09 PQ: 0 ANSI: 2 > target0:0:8: asynchronous > target0:0:8: Beginning Domain Validation > target0:0:8: Ending Domain Validation > scsi 0:0:9:0: Direct-Access SEAGATE ST336607LC 0007 PQ: 0 ANSI: 3 > target0:0:9: asynchronous > scsi0:A:9:0: Tagged Queuing enabled. Depth 32 > target0:0:9: Beginning Domain Validation > target0:0:9: wide asynchronous > target0:0:9: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP > (6.25 ns, offset 63) > target0:0:9: Ending Domain Validation > aic79xx 0000:04:02.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 > <Adaptec AIC7902 Ultra320 SCSI adapter> > aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100MHz, 512 SCBs > Driver 'sd' needs updating - please use bus_type methods > sd 0:0:6:0: [sda] 143374805 512-byte hardware sectors: (73.4 GB/68.3 GiB) > sd 0:0:6:0: [sda] Write Protect is off > sd 0:0:6:0: [sda] Mode Sense: c3 00 10 08 > sd 0:0:6:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and > FUA > sd 0:0:6:0: [sda] 143374805 512-byte hardware sectors: (73.4 GB/68.3 GiB) > sd 0:0:6:0: [sda] Write Protect is off > sd 0:0:6:0: [sda] Mode Sense: c3 00 10 08 > sd 0:0:6:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and > FUA > sda: sda1 sda2 > sd 0:0:6:0: [sda] Attached SCSI disk > sd 0:0:9:0: [sdb] 71687372 512-byte hardware sectors: (36.7 GB/34.1 GiB) > sd 0:0:9:0: [sdb] Write Protect is off > sd 0:0:9:0: [sdb] Mode Sense: ab 00 10 08 > sd 0:0:9:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and > FUA > sd 0:0:9:0: [sdb] 71687372 512-byte hardware sectors: (36.7 GB/34.1 GiB) > sd 0:0:9:0: [sdb] Write Protect is off > sd 0:0:9:0: [sdb] Mode Sense: ab 00 10 08 > sd 0:0:9:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and > FUA > sdb: sdb1 sdb2 > sd 0:0:9:0: [sdb] Attached SCSI disk > PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) > oprofile: using NMI interrupt. > TCP cubic registered > input: AT Translated Set 2 keyboard as /class/input/input2 > NET: Registered protocol family 10 > IPv6 over IPv4 tunneling driver > NET: Registered protocol family 17 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > Freeing unused kernel memory: 328k freed > end_request: I/O error, dev fd0, sector 0 > end_request: I/O error, dev fd0, sector 0 > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > input: PS/2 Generic Mouse as /class/input/input3 > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 > e1000e: Copyright (c) 1999-2008 Intel Corporation. > e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > e1000e 0000:06:00.0: setting latency timer to 64 > e1000e 0000:06:00.0: irq 95 for MSI/MSI-X > 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:30:48:30:61:16 > 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection > 0000:06:00.0: eth0: MAC: 4, PHY: 5, PBA No: ffffff-0ff > e1000e 0000:06:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > e1000e 0000:06:00.1: setting latency timer to 64 > e1000e 0000:06:00.1: irq 94 for MSI/MSI-X > 0000:06:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:30:48:30:61:17 > 0000:06:00.1: eth1: Intel(R) PRO/1000 Network Connection > 0000:06:00.1: eth1: MAC: 4, PHY: 5, PBA No: ffffff-0ff > EXT3 FS on sda1, internal journal > Adding 4096564k swap on /dev/sda2. Priority:-1 extents:1 across:4096564k > Adding 5123064k swap on /dev/sdb2. Priority:-2 extents:1 across:5123064k > platform microcode: firmware: requesting intel-ucode/06-0f-07 > platform microcode: firmware: requesting intel-ucode/06-0f-07 > platform microcode: firmware: requesting intel-ucode/06-0f-07 > platform microcode: firmware: requesting intel-ucode/06-0f-07 > platform microcode: firmware: requesting intel-ucode/06-0f-07 > platform microcode: firmware: requesting intel-ucode/06-0f-07 > platform microcode: firmware: requesting intel-ucode/06-0f-07 > platform microcode: firmware: requesting intel-ucode/06-0f-07 > Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx> > <peter.oruba@xxxxxxx> > Microcode Update Driver: v2.00 removed. > warning: process `kudzu' used the deprecated sysctl system call with 1.23. > process `sysctl' is using deprecated sysctl (syscall) > net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms > instead. > e1000e 0000:06:00.0: irq 95 for MSI/MSI-X > e1000e 0000:06:00.0: irq 95 for MSI/MSI-X > ADDRCONF(NETDEV_UP): eth0: link is not ready > 0000:06:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: None > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) > eth0: no IPv6 routers present >
Attachment:
panic-output
Description: panic-output
