Re: usb hdd problems with 2.6.27.2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[Adding CCs]

On Wednesday, 22 of October 2008, Luciano Rocha wrote:
> 
> Hello,
> 
> An external HDD, usb-encased, works fine under 2.6.26.5, but under
> 2.6.27.2 I get hundreds of errors per second, of 'No Sense [current]'.
> 
> On connection, under 2.6.26.5, I get the following:
> 
> [   84.503949] usb 1-2.1.1: new high speed USB device using ehci_hcd and address 8
> [   84.696861] usb 1-2.1.1: configuration #1 chosen from 1 choice
> [   84.740856] usbcore: registered new interface driver libusual
> [   84.817625] Initializing USB Mass Storage driver...
> [   84.817625] scsi2 : SCSI emulation for USB Mass Storage devices
> [   84.818820] usbcore: registered new interface driver usb-storage
> [   84.818823] USB Mass Storage support registered.
> [   89.819567] scsi 2:0:0:0: Direct-Access     SAMSUNG  HD400LD          WQ10 PQ: 0 ANSI: 0
> [   89.857627] Driver 'sd' needs updating - please use bus_type methods
> [   89.857837] sd 2:0:0:0: [sda] 781422769 512-byte hardware sectors (400088 MB)
> [   89.858754] sd 2:0:0:0: [sda] Write Protect is off
> [   89.858754] sd 2:0:0:0: [sda] Assuming drive cache: write through
> [   89.858869] sd 2:0:0:0: [sda] 781422769 512-byte hardware sectors (400088 MB)
> [   89.858869] sd 2:0:0:0: [sda] Write Protect is off
> [   89.858869] sd 2:0:0:0: [sda] Assuming drive cache: write through
> [   89.858869]  sda: sda1
> [   89.879851] sd 2:0:0:0: [sda] Attached SCSI disk
> [   89.901630] sd 2:0:0:0: Attached scsi generic sg0 type 0
> [   89.963632] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [   89.963632] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  106.913629] kjournald starting.  Commit interval 5 seconds
> [  106.913629] EXT3 FS on dm-5, internal journal
> 
> On 2.6.27.2, I get:
> 
> [  551.484341] usb 1-2.1.1: new high speed USB device using ehci_hcd and address 8
> [  551.677467] usb 1-2.1.1: configuration #1 chosen from 1 choice
> [  551.718201] usbcore: registered new interface driver libusual
> [  551.799287] Initializing USB Mass Storage driver...
> [  551.800330] scsi2 : SCSI emulation for USB Mass Storage devices
> [  551.800694] usbcore: registered new interface driver usb-storage
> [  551.800698] USB Mass Storage support registered.
> [  556.800702] scsi 2:0:0:0: Direct-Access     SAMSUNG  HD400LD          WQ10 PQ: 0 ANSI: 0
> [  556.835190] Driver 'sd' needs updating - please use bus_type methods
> [  556.835928] sd 2:0:0:0: [sda] 781422769 512-byte hardware sectors (400088 MB)
> [  556.836809] sd 2:0:0:0: [sda] Write Protect is off
> [  556.836816] sd 2:0:0:0: [sda] Assuming drive cache: write through
> [  556.837548] sd 2:0:0:0: [sda] 781422769 512-byte hardware sectors (400088 MB)
> [  556.838296] sd 2:0:0:0: [sda] Write Protect is off
> [  556.838307] sd 2:0:0:0: [sda] Assuming drive cache: write through
> [  556.838310]  sda: sda1
> [  556.859169] sd 2:0:0:0: [sda] Attached SCSI disk
> [  556.878553] sd 2:0:0:0: Attached scsi generic sg0 type 0
> [  556.946044] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [  556.946055] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  556.947290] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [  556.947298] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  556.948539] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [  556.948547] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  556.949790] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [  556.949798] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  556.951045] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [  556.951053] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  556.952290] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [  556.952297] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  556.954665] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [  556.954673] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  556.957665] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [  556.957673] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  556.960791] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [  556.960799] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  556.963790] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> [  556.963798] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [  556.966915] sd 2:0:0:0: [sda] Sense Key : No Sense [current] 
> 
> These repeat forever, till I disconnect.
> 
> Regards,
> Luciano Rocha
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux