Re: [PATCH] advansys: use request_firmware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Mattew,

On Sat, 2008-07-12 at 10:29 -0600, Matthew Wilcox wrote:
> > +	if (AscLoadMicroCode(iop_base, 0, &fw->data[4],
> > +			     fw->size - 4) != chksum) {
> >  		asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
> >  		return warn_code;
> >  	}
> > +	release_firmware(fw);
> 

Sorry, It should be :-
+       if (AscLoadMicroCode(iop_base, 0, &fw->data[4],
+                            fw->size - 4) != chksum) {
                asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
+               release_firmware(fw);
                return warn_code;
        }
+       release_firmware(fw);
        warn_code |= AscInitMicroCodeVar(asc_dvc);

You can get updated patch from
http://git.infradead.org/users/jaswinder/firm-jsr-2.6.git 

This is first draft, final patch will available at David's firmware tree
http://git.infradead.org/users/dwmw2/firmware-2.6.git

> You're calling release_firmware() here.  I don't know if that actually
> frees the firmware when it's built-in, but if it does, then freeing the
> firmware could cause the chip to stop working if it gets reset before
> userspace is up.

Normally release_firmware will be called after loading microcode.

Even it gets reset then It will again call request_firmware and load
firmware and then frees after loading microcode.

Logically it will work same as microcode_buffer say _adv_asc3550_buf[]
when you need to load microcode you just read from _adv_asc3550_buf[]
and load it. And if reset occurs you again read from _adv_asc3550_buf[]
and then load microcode, but you keep _adv_asc3550_buf[] all the time
in memory.
In our case we just request_firmware when need to load microcode and
release_firmware after loading. So we frees the memory after loading
microcode.

So it will not stop the chip from working.

> If it is OK to call release_firmware here, then the error path is
> missing a release_firmware() call.
> 

Fixed. Thanks.

If you still have some doubts, please let me know.

Thank you,

Jaswinder Singh.

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux