Re: [ANNOUNCE]: Generic SCSI Target Mid-level For Linux (followup)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2008-07-11 at 22:41 +0400, Vladislav Bolkhovitin wrote:
> Nicholas A. Bellinger wrote:
> >>>>  And this is a real showstopper for making LIO-Core 
> >>>> the default and the only SCSI target framework. SCST is SCSI-centric, 
> >>> Well, one needs to understand that LIO-Core subsystem API is more than a
> >>> SCSI target framework.  Its a generic method of accessing any possible
> >>> storage object of the storage stack, and having said engine handle the
> >>> hardware restrictions (be they physical or virtual) for the underlying
> >>> storage object.  It can run as a SCSI engine to real (or emualted) SCSI
> >>> hardware from linux/drivers/scsi, but the real strength is that it sits
> >>> above the SCSI/BLOCK/FILE layers and uses a single codepath for all
> >>> underlying storage objects.  For example in the lio-core-2.6.git tree, I
> >>> chose the location linux/drivers/lio-core, because LIO-Core uses 'struct
> >>> file' from fs/, 'struct block_device' from block/ and struct scsi_device
> >>> from drivers/scsi.
> >> SCST and iSCSI-SCST, basically, do the same things, except iSCSI MC/S 
> >> and related, + something more, like 1-to-many pass-through and 
> >> scst_user, which need a big chunks of code, correct? And they are 
> >> together about 2 times smaller:
> > 
> > Yes, something much more.  A complete implementation of traditional
> > iSCSI/TCP (known as RFC-3720), iSCSI/SCTP (which will be important in
> > the future), and IPv6 (also important) is a significant amount of logic.
> > When I say a 'complete implementation' I mean:
> > 
> > I) Active-Active connection layer recovery (known as
> > ErrorRecoveryLevel=2).  (We are going to use the same code for iSER for
> > inter-nexus OS independent (eg: below the SCSI Initiator level)
> > recovery.  Again, the important part here is that recovery and
> > outstanding task migration happens transparently to the host OS SCSI
> > subsystem.  This means (at least with iSCSI and iSER): not having to
> > register multiple LUNs and depend (at least completely) on SCSI WWN
> > information, and OS dependent SCSI level multipath.  
> > 
> > II) MC/S for multiplexing (same as I), as well as being able to
> > multiplex across multiple cards and subnets (using TCP, SCTP has
> > multi-homing).  Also being able to bring iSCSI connections up/down on
> > the fly, until we all have iSCSI/SCTP, is very important too.
> > 
> > III) Every possible combination of RFC-3720 defined parameter keys (and
> > provide the apparatis to prove it).  And yes, anyone can do this today
> > against their own Target.  I created core-iscsi-dv specifically for
> > testing LIO-Target <-> LIO-Core back in 2005.  Core-iSCSI-DV is the
> > _ONLY_ _PUBLIC_ RFC-3720 domain validation tool that will actually
> > demonstrate, using ANY data integrity tool complete domain validation of
> > user defined keys.  Please have a look at:
> > 
> > http://linux-iscsi.org/index.php/Core-iscsi-dv
> > 
> > http://www.linux-iscsi.org/files/core-iscsi-dv/README
> > 
> > Any traditional iSCSI target mode implementation + Storage Engine +
> > Subsystem Plugin that thinks its ready to go into the kernel will have
> > to pass at LEAST the 8k test loop interations, the simplest being:
> > 
> > HeaderDigest, DataDigest, MaxRecvDataSegmentLength (512 -> 262144, in
> > 512 byte increments)
> > 
> > Core-iSCSI-DV is also a great indication of stability and data integrity
> > of hardware/software of an iSCSI Target + Engine, espically when you
> > have multiple core-iscsi-dv nodes hitting multiple VHACS clouds on
> > physical machines within the cluster.  I have never run IET against
> > core-iscsi-dv personally, and I don't think Ming or Ross has either.

Ming or Ross, would you like to make a comment on this, considering
after it, it is your work..?

>   So
> > until SOMEONE actually does this first, I think that iSCSI-SCST is more
> > of an experiment for your our devel that a strong contender for
> > Linux/iSCSI Target Mode.
> 
> There are big doubts among storage experts if features I and II are 
> needed at all, see, e.g. http://lkml.org/lkml/2008/2/5/331.

Well, jgarzik is both a NETWORKING and STORAGE (he was a networking guy
first, mind you) expert!

>  I also tend 
> to agree, that for block storage on practice MC/S is not needed or, at 
> least, definitely doesn't worth the effort, because:
> 

Trying to agrue against MC/S (or against any other major part of
RFC-3720, including ERL=2) is saying that Linux/iSCSI should be BEHIND
what the greatest minds in the IETF have produced (and learned) from
iSCSI.  Considering so many people are interested in seeing Linux/iSCSI
be best and most complete implementation possible, surely one would not
be foolish enough to try to debate that Linux should be BEHIND what
others have figured out, be it with RFCs or running code.

Also, you should understand that MC/S is more than about just moving
data I/O across multiple TCP connections, its about being able to bring
those paths up/down on the fly without having to actually STOP/PAUSE
anything. Then you then add the ERL=2 pixie dust, which you should
understand, is the result of over a decade of work creating RFC-3720
within the IETF IPS TWG.  What you have is a fabric that does not
STOP/PAUSE from an OS INDEPENDENT LEVEL (below the OS dependent SCSI
subsystem layer) perspective, on every possible T/I node, big and small,
open or closed platform.  Even as we move towards more logic in the
network layer (a la Stream Control Transmission Protocol), we will still
benefit from RFC-3720 as the years roll on.  Quite a powerful thing..

> 1. It is useless for sync. untagged operation (regular reads in most 
> cases over a single stream), when always there is only one command being 
> executed at any time, because of the commands connection allegiance, 
> which forbids transferring data for a command over multiple connections.
> 

This is a very Parallel SCSI centric way of looking at design of SAM.
Since SAM allows the transport fabric to enforce its own ordering rules
(it does offer some of its own SCSI level ones of course).  Obviously
each fabric (PSCSI, FC, SAS, iSCSI) are very different from the bus
phase perspective.  But, if you look back into the history of iSCSI, you
will see that an asymmetric design with seperate CONTROL/DATA TCP
connections was considered originally BEFORE the Command Sequence Number
(CmdSN) ordering algoritim was adopted that allows both SINGLE and
MULTIPLE TCP connections to move both CONTROL/DATA packets across a
iSCSI Nexus.

Using MC/S with a modern iSCSI implementation to take advantage of lots
of cores and hardware threads is something that allows one to multiplex
across multiple vendor's NIC ports, with the least possible overhead, in
the OS INDEPENDENT manner.  Keep in mind that you can do the allocation
and RX of WRITE data OOO, but the actual *EXECUTION* down via the
subsystem API (which is what LIO-Target <-> LIO-Core does, in a generic
way) MUST BE in the same over as the CDBs came from the iSCSI Initiator
port.  This is the only requirement for iSCSI CmdSN order rules wrt the
SCSI Architecture Model.

> 2. The only advantage it has over traditional OS multi-pathing is 
> keeping commands execution order, but on practice at the moment there is 
> no demand for this feature, because all OS'es I know don't rely on 
> commands order to protect data integrity. They use other techniques, 
> like queue draining. A good target should be able itself to scheduler 
> coming commands for execution in the correct from performance POV order 
>   and not rely for that on the commands order as they came from initiators.
> 

Ok, you are completely missing the point of MC/S and ERL=2. Notice how
it works in both iSCSI *AND* iSER (even across DDP fabrics!).  I
discussed the significant benefit of ERL=2 in numerious previous
threads.  But they can all be neatly summerized in:

http://linux-iscsi.org/builds/user/nab/Inter.vs.OuterNexus.Multiplexing.pdf

Internexus Multiplexing is DESIGNED to work with OS dependent multipath
transparently, and as a matter of fact, it complements it quite well, in
a OSI (independent) method.  Its completely up to the admin to determine
the benefit and configure the knobs.

So, the bit: "We should not implement this important part of the RFC
just because I want some code in the kernel" is not going to get your
design very far.

>  From other side, devices bonding also preserves commands execution 
> order, but doesn't suffer from the connection allegiance limitation of 
> MC/S, so can boost performance ever for sync untagged operations. Plus, 
> it's pretty simple, easy to use and doesn't need any additional code. I 
> don't have the exact numbers of MC/S vs bonding performance comparison 
> (mostly, because open-iscsi doesn't support MC/S, but very curious to 
> see them), but have very strong suspicious that on modern OS'es, which 
> do TCP frames reorder in zero-copy manner, there shouldn't be much 
> performance difference between MC/S vs bonding in the maximum possible 
> throughput, but bonding should outperform MC/S a lot in case of sync 
> untagged operations.
> 

Simple case here for you to get your feet wet with MC/S.  Try doing
bonding across 4x GB/sec ports on 2x socket 2x core x86_64 and compare
MC/S vs. OS dependent networking bonding and see what you find. There
about two iSCSI initiators for two OSes that implementing MC/S and
LIO-Target <-> LIO-Target.  Anyone interested in the CPU overhead on
this setup between MC/S and Link Layer bonding across 2x 2x 1 Gb/sec
port chips on 4 core x86_64..?

> Anyway, I think features I and II, if added, would increase iSCSI-SCST 
> kernel side code not more than on 5K lines, because most of the code is 
> already there, the most important part which missed is fixes of locking 
> problems, which almost never add a lot of code.

You can think whatever you want.  Why don't you have a look at
lio-core-2.6.git and see how big they are for yourself.

>  Relating Core-iSCSI-DV, 
> I'm sure iSCSI-SCST will pass it without problems among the required set 
> of iSCSI features, although still there are some limitations, derived 
> from IET, for instance, support for multu-PDU commands in discovery 
> sessions, which isn't implemented. But for adding to iSCSI-SCST optional 
> iSCSI features there should be good *practical* reasons, which at the 
> moment don't exist. And unused features are bad features, because they 
> overcomplicate the code and make its maintainance harder for no gain.
> 

Again, you can think whatever you want.  But since you did not implement
the majority of the iSCSI-SCST code yourself, (or implement your own
iSCSI Initiator in parallel with your own iSCSI Target), I do not
believe you are in a position to say.  Any IET devs want to comment on
this..?

> So, current SCST+iSCSI-SCST 36K lines + 5K new lines = 41K lines, which 
> still a lot less than LIO's 63K lines. I downloaded the cleanuped 
> lio-core-2.6.git tree and:
> 

Blindly comparing lines of code with no context is usually dumb.  But,
since that is what you seem to be stuck on, how about this:

LIO 63k +
SCST (minus iSCSI) ??k +
iSER from STGT ??k ==

For the complete LIO-Core engine on fabrics, and which includes what
Rafiu from Openfiler has been so kind to call LIO-Target, "arguably the
most feature complete and mature implementation out there (on any
platform) "

> $ find lio-core-2.6/drivers/lio-core -type f -name "*.[ch]"|xargs wc
> 57064  156617 1548344 total
> 
> Still much bigger.
> 
> > Obviously not.  Also, what I was talking about there was the strength
> > and flexibility of the LIO-Core design (it even ran on the Playstation 2
> > at one point, http://linux-iscsi.org/index.php/Playstation2/iSCSI, when
> > MIPS r5900 boots modern v2.6, then we will do it again with LIO :-)
> 
> SCST and the target drivers have been successfully ran on PPC and 
> Sparc64, so I don't see any reasons, why it can't be ran on Playstation 
> 2 as well.
> 

Oh it can, can it..?  Does your engine memory allocation algoritim
provide for a SINGLE method for allocating linked list scatterlists
containing page links of ANY (not just PAGE_SIZE) size handled
generically across both internal or preregistered memory allocation
acases, or coming from say, a software RNIC moving DDP packets for iSCSI
in a single code path..? 

And then it needs to be able to go down to the PS2-Linux PATA driver,
that does not show up under the SCSI subsystem mind you.   Surely you
understand that because the MIPS r5900 is a non cache coherent
architecture that you simply cannot allocate out multiple page
contigious scatterlists for your I/Os, and simply expect it to work when
we are sending blocks down to the 32-bit MIPS r3000 IOP..?

> >>>>   - Pass-through mode (PSCSI) also provides non-enforced 1-to-1 
> >>>> relationship, as it used to be in STGT (now in STGT support for 
> >>>> pass-through mode seems to be removed), which isn't mentioned anywhere.
> >>>>
> >>> Please be more specific by what you mean here.  Also, note that because
> >>> PSCSI is an LIO-Core subsystem plugin, LIO-Core handles the limitations
> >>> of the storage object through the LIO-Core subsystem API.  This means
> >>> that things like (received initiator CDB sectors > LIO-Core storage
> >>> object max_sectors) are handled generically by LIO-Core, using a single
> >>> set of algoritims for all I/O interaction with Linux storage systems.
> >>> These algoritims are also the same for DIFFERENT types of transport
> >>> fabrics, both those that expect LIO-Core to allocate memory, OR that
> >>> hardware will have preallocated memory and possible restrictions from
> >>> the CPU/BUS architecture (take non-cache coherent MIPS for example) of
> >>> how the memory gets DMA'ed or PIO'ed down to the packet's intended
> >>> storage object.
> >> See here: 
> >> http://www.mail-archive.com/linux-scsi@xxxxxxxxxxxxxxx/msg06911.html
> >>
> > 
> > <nod>
> > 
> >>>>   - There is some confusion in the code in the function and variable 
> >>>> names between persistent and SAM-2 reservations.
> >>> Well, that would be because persistent reservations are not emulated
> >>> generally for all of the subsystem plugins just yet.  Obviously with
> >>> LIO-Core/PSCSI if the underlying hardware supports it, it will work.
> >> What you did (passing reservation commands directly to devices and 
> >> nothing more) will work only with a single initiator per device, where 
> >> reservations in the majority of cases are not needed at all.
> > 
> > I know, like I said, implementing Persistent Reservations for stuff
> > besides real SCSI hardware with LIO-Core/PSCSI is a TODO item.  Note
> > that the VHACS cloud (see below) will need this for DRBD objects at some
> > point.
> 
> The problem is that persistent reservations don't work for multiple 
> initiators even for real SCSI hardware with LIO-Core/PSCSI and I clearly 
> described why in the referenced e-mail. Nicholas, why don't you want to 
> see it?
> 

Why don't you provide a reference in the code to where you think the
problem is, and/or problem case using Linux iSCSI Initiators VMs to
demonstrate the bug..?

> >>>>> The more in fighting between the
> >>>>> leaders in our community, the less the community benefits.
> >>>> Sure. If my note hurts you, I can remove it. But you should also remove 
> >>>> from your presentation and the summary paper those psychological 
> >>>> arguments to not confuse people.
> >>>>
> >>> Its not about removing, it is about updating the page to better reflect
> >>> the bigger picture so folks coming to the sight can get the latest
> >>> information from last update.
> >> Your suggestions?
> >>
> > 
> > I would consider helping with this at some point, but as you can see, I
> > am extremly busy ATM.  I have looked at SCST quite a bit over the years,
> > but I am not the one making a public comparision page, at least not
> > yet. :-)  So until then, at least explain how there are 3 projects on
> > your page, with the updated 10,000 ft overviews, and mabye even add some
> > links to LIO-Target and a bit about VHACS cloud.  I would be willing to
> > include info about SCST into the Linux-iSCSI.org wiki.  Also, please
> > feel free to open an account and start adding stuff about SCST yourself
> > to the site.
> > 
> > For Linux-iSCSI.org and VHACS (which is really where everything is going
> > now), please have a look at:
> > 
> > http://linux-iscsi.org/index.php/VHACS-VM
> > http://linux-iscsi.org/index.php/VHACS
> > 
> > Btw, the VHACS and LIO-Core design will allow for other fabrics to be
> > used inside our cloud, and between other virtualized client setups who
> > speak the wire protocol presented by the server side of VHACS cloud.
> > 
> > Many thanks for your most valuable of time,
> > 

New v0.8.15 VHACS-VM images online btw.  Keep checking the site for more details.

Many thanks for your most valuable of time,

--nab


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux