Re: [PATCH 02/18] qla2xxx: Add dev_loss_tmo_callbk/terminate_rport_io callback support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Andrew Vasquez wrote:
+static void
+qla2x00_terminate_rport_io(struct fc_rport *rport)
+{
+	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+
+	qla2x00_abort_fcport_cmds(fcport);


Hey, I was also wondering how we get commands still in the driver at this point? I was doing some testing on my patches and could not hit it. Does it only occur with things like tape commands or what type of errors would block/remove the rport but not end up failing the commands at the time the error is detected? Like with the CS_TIMEOUT case I hit here
http://marc.info/?l=linux-scsi&m=121263015108620&w=2
the IO is failed right away, so when I got to where the terminate callback is called there was no IO in the driver.

Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux