Jeff Garzik wrote:
Vladislav Bolkhovitin wrote:
I'm glad to announce that version 1.0.0 of target drivers for QLogic
Fibre Channel cards released and available for download from
http://scst.sourceforge.net/downloads.html.
Two target drivers were released:
- Target driver qla2x00t for 22xx and 23xx based QLogic Fibre Channel
cards
- Target driver qla_isp for 24xx based QLogic Fibre Channel cards
Those drivers are designed to work in SCST environment. They are high
performance drivers, which provide all necessary functionality to work
as targets in Fibre Channel environment.
Detail description of the target drivers you can find on SCST home page
http://scst.sourceforge.net.
Driver qla2x00t is being prepared in form of patch for review and
inclusion into the kernel.
Cool. I'm looking forward to figuring out how to enable ATA target mode
in a similar manner... sata_mv and some ahci chips support ATA target mode.
Actually, I forgot to mention that there are two more target drivers
available for download as well. One of them can be especially interested
for you, because it should work with SAS (I have a report with coming
CDBs from this transport, but have no hardware to check).
- Target driver for InfiniBand SRP
http://scst.sourceforge.net/target_srp.html
- Target driver for LSI/MPT cards
http://scst.sourceforge.net/target_lsi.html. This driver was developed
for parallel SCSI, but also should work with SAS and Fibre Channel
transports.
They can be downloaded from the SCST SVN by using command:
$ svn co https://scst.svn.sourceforge.net/svnroot/scst
They were not released as a separate packages, because their authors
preferred that.
Vlad
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
