Change device reset behavior.
Prior handler was only waiting for I/O on one lun to finish before
returning completion. Now, wait for all LUNs on the target.
Also performed some rudimentary cleanup while in this code.
Signed-off-by: James Smart <james.smart@xxxxxxxxxx>
---
lpfc_scsi.c | 201 +++++++++++++++++++++++-------------------------------------
1 file changed, 80 insertions(+), 121 deletions(-)
diff -upNr a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
--- a/drivers/scsi/lpfc/lpfc_scsi.c 2008-04-10 17:07:58.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_scsi.c 2008-06-14 22:16:48.000000000 -0400
@@ -849,14 +849,15 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf
struct lpfc_iocbq *iocbq;
struct lpfc_iocbq *iocbqrsp;
int ret;
+ int status;
if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode))
return FAILED;
lpfc_cmd->rdata = rdata;
- ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
+ status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
FCP_TARGET_RESET);
- if (!ret)
+ if (!status)
return FAILED;
iocbq = &lpfc_cmd->cur_iocbq;
@@ -869,12 +870,15 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
- ret = lpfc_sli_issue_iocb_wait(phba,
+ status = lpfc_sli_issue_iocb_wait(phba,
&phba->sli.ring[phba->sli.fcp_ring],
iocbq, iocbqrsp, lpfc_cmd->timeout);
- if (ret != IOCB_SUCCESS) {
- if (ret == IOCB_TIMEDOUT)
+ if (status != IOCB_SUCCESS) {
+ if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
+ ret = TIMEOUT_ERROR;
+ } else
+ ret = FAILED;
lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
} else {
ret = SUCCESS;
@@ -1142,121 +1146,96 @@ lpfc_device_reset_handler(struct scsi_cm
struct lpfc_iocbq *iocbq, *iocbqrsp;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *pnode = rdata->pnode;
- uint32_t cmd_result = 0, cmd_status = 0;
- int ret = FAILED;
- int iocb_status = IOCB_SUCCESS;
- int cnt, loopcnt;
+ unsigned long later;
+ int ret = SUCCESS;
+ int status;
+ int cnt;
lpfc_block_error_handler(cmnd);
- loopcnt = 0;
/*
* If target is not in a MAPPED state, delay the reset until
* target is rediscovered or devloss timeout expires.
*/
- while (1) {
+ later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ while (time_after(later, jiffies)) {
if (!pnode || !NLP_CHK_NODE_ACT(pnode))
- goto out;
-
- if (pnode->nlp_state != NLP_STE_MAPPED_NODE) {
- schedule_timeout_uninterruptible(msecs_to_jiffies(500));
- loopcnt++;
- rdata = cmnd->device->hostdata;
- if (!rdata ||
- (loopcnt > ((vport->cfg_devloss_tmo * 2) + 1))){
- lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0721 LUN Reset rport "
- "failure: cnt x%x rdata x%p\n",
- loopcnt, rdata);
- goto out;
- }
- pnode = rdata->pnode;
- if (!pnode || !NLP_CHK_NODE_ACT(pnode))
- goto out;
- }
+ return FAILED;
if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
break;
+ schedule_timeout_uninterruptible(msecs_to_jiffies(500));
+ rdata = cmnd->device->hostdata;
+ if (!rdata)
+ break;
+ pnode = rdata->pnode;
+ }
+ if (!rdata || pnode->nlp_state != NLP_STE_MAPPED_NODE) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0721 LUN Reset rport "
+ "failure: msec x%x rdata x%p\n",
+ jiffies_to_msecs(jiffies - later), rdata);
+ return FAILED;
}
-
lpfc_cmd = lpfc_get_scsi_buf(phba);
if (lpfc_cmd == NULL)
- goto out;
-
+ return FAILED;
lpfc_cmd->timeout = 60;
lpfc_cmd->rdata = rdata;
- ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, cmnd->device->lun,
- FCP_TARGET_RESET);
- if (!ret)
- goto out_free_scsi_buf;
-
+ status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd,
+ cmnd->device->lun,
+ FCP_TARGET_RESET);
+ if (!status) {
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ return FAILED;
+ }
iocbq = &lpfc_cmd->cur_iocbq;
/* get a buffer for this IOCB command response */
iocbqrsp = lpfc_sli_get_iocbq(phba);
- if (iocbqrsp == NULL)
- goto out_free_scsi_buf;
-
+ if (iocbqrsp == NULL) {
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ return FAILED;
+ }
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0703 Issue target reset to TGT %d LUN %d "
"rpi x%x nlp_flag x%x\n", cmnd->device->id,
cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
- iocb_status = lpfc_sli_issue_iocb_wait(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
- iocbq, iocbqrsp, lpfc_cmd->timeout);
-
- if (iocb_status == IOCB_TIMEDOUT)
+ status = lpfc_sli_issue_iocb_wait(phba,
+ &phba->sli.ring[phba->sli.fcp_ring],
+ iocbq, iocbqrsp, lpfc_cmd->timeout);
+ if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
-
- if (iocb_status == IOCB_SUCCESS)
- ret = SUCCESS;
- else
- ret = iocb_status;
-
- cmd_result = iocbqrsp->iocb.un.ulpWord[4];
- cmd_status = iocbqrsp->iocb.ulpStatus;
-
+ ret = TIMEOUT_ERROR;
+ } else {
+ if (status != IOCB_SUCCESS)
+ ret = FAILED;
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ }
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0713 SCSI layer issued device reset (%d, %d) "
+ "return x%x status x%x result x%x\n",
+ cmnd->device->id, cmnd->device->lun, ret,
+ iocbqrsp->iocb.ulpStatus,
+ iocbqrsp->iocb.un.ulpWord[4]);
lpfc_sli_release_iocbq(phba, iocbqrsp);
-
- /*
- * All outstanding txcmplq I/Os should have been aborted by the device.
- * Unfortunately, some targets do not abide by this forcing the driver
- * to double check.
- */
cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun,
- LPFC_CTX_LUN);
+ LPFC_CTX_TGT);
if (cnt)
lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
cmnd->device->id, cmnd->device->lun,
- LPFC_CTX_LUN);
- loopcnt = 0;
- while(cnt) {
- schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
-
- if (++loopcnt
- > (2 * vport->cfg_devloss_tmo)/LPFC_RESET_WAIT)
- break;
-
+ LPFC_CTX_TGT);
+ later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ while (time_after(later, jiffies) && cnt) {
+ schedule_timeout_uninterruptible(msecs_to_jiffies(20));
cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id,
- cmnd->device->lun, LPFC_CTX_LUN);
+ cmnd->device->lun, LPFC_CTX_TGT);
}
-
if (cnt) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0719 device reset I/O flush failure: "
"cnt x%x\n", cnt);
ret = FAILED;
}
-
-out_free_scsi_buf:
- if (iocb_status != IOCB_TIMEDOUT) {
- lpfc_release_scsi_buf(phba, lpfc_cmd);
- }
- lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0713 SCSI layer issued device reset (%d, %d) "
- "return x%x status x%x result x%x\n",
- cmnd->device->id, cmnd->device->lun, ret,
- cmd_status, cmd_result);
-out:
return ret;
}
@@ -1268,19 +1247,12 @@ lpfc_bus_reset_handler(struct scsi_cmnd
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp = NULL;
int match;
- int ret = FAILED, i, err_count = 0;
- int cnt, loopcnt;
+ int ret = SUCCESS, status, i;
+ int cnt;
struct lpfc_scsi_buf * lpfc_cmd;
+ unsigned long later;
lpfc_block_error_handler(cmnd);
-
- lpfc_cmd = lpfc_get_scsi_buf(phba);
- if (lpfc_cmd == NULL)
- goto out;
-
- /* The lpfc_cmd storage is reused. Set all loop invariants. */
- lpfc_cmd->timeout = 60;
-
/*
* Since the driver manages a single bus device, reset all
* targets known to the driver. Should any target reset
@@ -1294,7 +1266,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd
if (!NLP_CHK_NODE_ACT(ndlp))
continue;
if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
- i == ndlp->nlp_sid &&
+ ndlp->nlp_sid == i &&
ndlp->rport) {
match = 1;
break;
@@ -1303,27 +1275,22 @@ lpfc_bus_reset_handler(struct scsi_cmnd
spin_unlock_irq(shost->host_lock);
if (!match)
continue;
-
- ret = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i,
- cmnd->device->lun,
- ndlp->rport->dd_data);
- if (ret != SUCCESS) {
+ lpfc_cmd = lpfc_get_scsi_buf(phba);
+ if (lpfc_cmd) {
+ lpfc_cmd->timeout = 60;
+ status = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i,
+ cmnd->device->lun,
+ ndlp->rport->dd_data);
+ if (status != TIMEOUT_ERROR)
+ lpfc_release_scsi_buf(phba, lpfc_cmd);
+ }
+ if (!lpfc_cmd || status != SUCCESS) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0700 Bus Reset on target %d failed\n",
i);
- err_count++;
- break;
+ ret = FAILED;
}
}
-
- if (ret != IOCB_TIMEDOUT)
- lpfc_release_scsi_buf(phba, lpfc_cmd);
-
- if (err_count == 0)
- ret = SUCCESS;
- else
- ret = FAILED;
-
/*
* All outstanding txcmplq I/Os should have been aborted by
* the targets. Unfortunately, some targets do not abide by
@@ -1333,27 +1300,19 @@ lpfc_bus_reset_handler(struct scsi_cmnd
if (cnt)
lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
0, 0, LPFC_CTX_HOST);
- loopcnt = 0;
- while(cnt) {
- schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
-
- if (++loopcnt
- > (2 * vport->cfg_devloss_tmo)/LPFC_RESET_WAIT)
- break;
-
+ later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ while (time_after(later, jiffies) && cnt) {
+ schedule_timeout_uninterruptible(msecs_to_jiffies(20));
cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
}
-
if (cnt) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0715 Bus Reset I/O flush failure: "
"cnt x%x left x%x\n", cnt, i);
ret = FAILED;
}
-
lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
"0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
-out:
return ret;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
