--Boundary-00=_NG3SIU63+Zdv2JV Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Friday 06 June 2008, James Bottomley wrote: > On Fri, 2008-06-06 at 11:03 -0700, Andrew Morton wrote: > > On Fri, 06 Jun 2008 10:22:22 -0500 James Bottomley=20 <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx> wrote: > > > On Thu, 2008-06-05 at 23:25 -0700, Andrew Morton wrote: > > > > On Thu, 5 Jun 2008 23:21:45 -0700 Andrew Morton=20 <akpm@xxxxxxxxxxxxxxxxxxxx> wrote: > > > > > <watches wodim wibble for five minutes then report "CD/DVD-Record= er > > > > > not ready." Pretends not to have noticed.> > > > > > > > > It goes much better when the CD is inserted upside up. > > > > > > So I can close this regression if I send you a pack of CD ring labels > > > with "other way up" on them for you to affix to the underside of your > > > CDs ... ? > > > > Would prefer double-sided CDs. > > I just discovered my budget only runs to a permanent marker for you to > write the instructions on the rim yourself ... > > > Is this 20-second-delay thing known-about/expected/etc? > > If it's not the scsi_bus_uevent problem, then no, it isn't. > > The odd thing is that it occurs in the middle of USB initialisation from > Because of this oddity, I've also built 2.6.26-rc5-git2 with verbose USB debugging on. A boot log from that kernel is attached. You will see lots of ETIME errors from usb. A log from a similarly verbose 2.6.25.5 kernel does not show these errors. usb-devel added to cc list. > the log: > > =EF=BB=BFJun 6 17:25:19 upstairs kernel: uhci_hcd 0000:00:1d.0: UHCI H= ost > > Controller Jun 6 17:25:19 upstairs kernel: uhci_hcd 0000:00:1d.0: new > > USB bus registered, assigned bus number 1 Jun 6 17:25:19 upstairs > > kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000a800 Jun 6 17:25:= 19 > > upstairs kernel: usb usb1: configuration #1 chosen from 1 choice Jun 6 > > 17:25:19 upstairs kernel: hub 1-0:1.0: USB hub found > > Jun 6 17:25:19 upstairs kernel: hub 1-0:1.0: 2 ports detected > > Jun 6 17:25:44 upstairs kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' > > Host Controller (OHCI) Driver Jun 6 17:25:44 upstairs kernel: usb usb1: > > New USB device found, idVendor=3D1d6b, idProduct=3D0001 Jun 6 17:25:44 > > upstairs kernel: usb usb1: New USB device strings: Mfr=3D3, Product=3D2, > > SerialNumber=3D1 Jun 6 17:25:44 upstairs kernel: usb usb1: Product: UH= CI > > Host Controller Jun 6 17:25:44 upstairs kernel: usb usb1: Manufacturer: > > Linux 2.6.26-rc5 uhci_hcd > > Note the jump from 19 to 44 seconds. > > There's another one here: > > =EF=BB=BFJun 6 17:25:44 upstairs kernel: EXT3-fs: mounted filesystem w= ith > > ordered data mode. Jun 6 17:25:44 upstairs kernel: Adding 4096532k swap > > on /dev/sda5. Priority:-1 extents:1 across:4096532k Jun 6 17:25:44 > > upstairs kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Jun 6 > > 17:25:44 upstairs kernel: ip_tables: (C) 2000-2006 Netfilter Core Team > > Jun 6 17:25:44 upstairs kernel: nf_conntrack version 0.5.0 (16384 > > buckets, 65536 max) Jun 6 17:25:44 upstairs kernel: parport_pc 00:06: > > disabled > > Jun 6 17:25:44 upstairs kernel: pnp: the driver 'parport_pc' has been > > unregistered Jun 6 17:25:44 upstairs kernel: ieee1394: Node removed: > > ID:BUS[0-00:1023] GUID[00110666000013cc] Jun 6 17:26:31 upstairs > > kernel: usb 11-2: new high speed USB device using ehci_hcd and address 3 > > Jun 6 17:26:31 upstairs kernel: usb 11-2: configuration #1 chosen from= 1 > > choice Jun 6 17:26:31 upstairs kernel: usb 11-2: New USB device found, > > idVendor=3D0930, idProduct=3D6545 Jun 6 17:26:31 upstairs kernel: usb = 11-2: > > New USB device strings: Mfr=3D0, Product=3D2, SerialNumber=3D3 Jun 6 1= 7:26:31 > > upstairs kernel: usb 11-2: Product: USB Flash Memory Jun 6 17:26:31 > > upstairs kernel: usb 11-2: SerialNumber: 0EC065712361A91E > > I'm a bit baffled as to how that could be SCSI related, but I suppose it > could be udev related somehow. Perhaps turning on driver core debugging > might help (that's CONFIG_DEBUG DRIVER ... it depends on > CONFIG_DEBUG_KERNEL for activation). Hopefully the verbose kernel logs > from here might tell us what's going on in the lacunae. > Triggered by James' bafflement and for my own peace of mind, I've run another bisect session. This time I started with v2.6.26 as good and v2.6.26-rc2 as bad. It highlighted the same patch as the "culprit". Chris > James -- Beauty is in the eye of the beerholder.
Jun 8 05:26:34 upstairs kernel: klogd 1.3-3, log source = /proc/kmsg started. Jun 8 05:26:34 upstairs kernel: Inspecting /boot/System.map-2.6.26-rc5-git2 Jun 8 05:26:35 upstairs kernel: Loaded 26388 symbols from /boot/System.map-2.6.26-rc5-git2. Jun 8 05:26:35 upstairs kernel: Symbols match kernel version 2.6.26. Jun 8 05:26:35 upstairs kernel: No module symbols loaded - kernel modules not enabled. Jun 8 05:26:35 upstairs kernel: n from 1 choice Jun 8 05:26:35 upstairs kernel: usb usb7: adding 7-0:1.0 (config #1, interface 0) Jun 8 05:26:35 upstairs kernel: device: '7-0:1.0': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device 7-0:1.0 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:7-0:1.0 Jun 8 05:26:35 upstairs kernel: usb 7-0:1.0: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device 7-0:1.0 with driver hub Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 7-0:1.0 Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: usb_probe_interface Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: usb_probe_interface - got id Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: USB hub found Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: 2 ports detected Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: standalone hub Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: no power switching (usb 1.0) Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: global over-current protection Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: power on to power good time: 510ms Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: local power source is good Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: no over-current condition exists Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: trying to enable port power on non-switchable hub Jun 8 05:26:35 upstairs kernel: hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:00:1d.7: port 2 full speed --> companion Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT Jun 8 05:26:35 upstairs kernel: hub 6-0:1.0: port 2 not reset yet, waiting 50ms Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001403 POWER sig=k CSC CONNECT Jun 8 05:26:35 upstairs kernel: hub 6-0:1.0: port 4, status 0501, change 0001, 480 Mb/s Jun 8 05:26:35 upstairs kernel: hub 6-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:00:1d.7: port 4 low speed --> companion Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:00:1d.7: GetStatus port 4 status 003002 POWER OWNER sig=se0 CSC Jun 8 05:26:35 upstairs kernel: hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0000 Jun 8 05:26:35 upstairs kernel: hub 6-0:1.0: state 7 ports 8 chg 0000 evt 0010 Jun 8 05:26:35 upstairs kernel: hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00 Jun 8 05:26:35 upstairs kernel: hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s Jun 8 05:26:35 upstairs kernel: hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 Jun 8 05:26:35 upstairs kernel: driver: '7-0:1.0': driver_bound: bound to device 'hub' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device 7-0:1.0 to driver hub Jun 8 05:26:35 upstairs kernel: device: 'usbdev7.1_ep81': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev7.1_ep81 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '001' Jun 8 05:26:35 upstairs kernel: driver: 'usb7': driver_bound: bound to device 'usb' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device usb7 to driver usb Jun 8 05:26:35 upstairs kernel: device: 'usbdev7.1_ep00': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev7.1_ep00 Jun 8 05:26:35 upstairs kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 Jun 8 05:26:35 upstairs kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 8 05:26:35 upstairs kernel: usb usb7: Product: OHCI Host Controller Jun 8 05:26:35 upstairs kernel: usb usb7: Manufacturer: Linux 2.6.26-rc5-git2 ohci_hcd Jun 8 05:26:35 upstairs kernel: usb usb7: SerialNumber: 0000:02:0a.1 Jun 8 05:26:35 upstairs kernel: driver: '0000:02:0a.1': driver_bound: bound to device 'ohci_hcd' Jun 8 05:26:35 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:0a.1 to driver ohci_hcd Jun 8 05:26:35 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:09.0 with driver uhci_hcd Jun 8 05:26:35 upstairs kernel: bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:02:09.0 Jun 8 05:26:35 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17 Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.0: UHCI Host Controller Jun 8 05:26:35 upstairs kernel: device: 'usb_host8': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usb_host8 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '008' Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.0: new USB bus registered, assigned bus number 8 Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.0: detected 2 ports Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.0: uhci_check_and_reset_hc: cmd = 0x0000 Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.0: Performing full reset Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.0: irq 17, io base 0x0000e400 Jun 8 05:26:35 upstairs kernel: usb usb8: default language 0x0409 Jun 8 05:26:35 upstairs kernel: device: 'usb8': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device usb8 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:usb8 Jun 8 05:26:35 upstairs kernel: usb usb8: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb8 with driver usb Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb8 Jun 8 05:26:35 upstairs kernel: usb usb8: usb_probe_device Jun 8 05:26:35 upstairs kernel: usb usb8: configuration #1 chosen from 1 choice Jun 8 05:26:35 upstairs kernel: usb usb8: adding 8-0:1.0 (config #1, interface 0) Jun 8 05:26:35 upstairs kernel: device: '8-0:1.0': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device 8-0:1.0 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:8-0:1.0 Jun 8 05:26:35 upstairs kernel: usb 8-0:1.0: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device 8-0:1.0 with driver hub Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 8-0:1.0 Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: usb_probe_interface Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: usb_probe_interface - got id Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: USB hub found Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: 2 ports detected Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: standalone hub Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: no power switching (usb 1.0) Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: individual port over-current protection Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: power on to power good time: 2ms Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: local power source is good Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: trying to enable port power on non-switchable hub Jun 8 05:26:35 upstairs kernel: usb 2-2: new full speed USB device using uhci_hcd and address 3 Jun 8 05:26:35 upstairs kernel: usb 2-2: ep0 maxpacket = 8 Jun 8 05:26:35 upstairs kernel: driver: '8-0:1.0': driver_bound: bound to device 'hub' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device 8-0:1.0 to driver hub Jun 8 05:26:35 upstairs kernel: device: 'usbdev8.1_ep81': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev8.1_ep81 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '001' Jun 8 05:26:35 upstairs kernel: driver: 'usb8': driver_bound: bound to device 'usb' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device usb8 to driver usb Jun 8 05:26:35 upstairs kernel: device: 'usbdev8.1_ep00': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev8.1_ep00 Jun 8 05:26:35 upstairs kernel: usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 Jun 8 05:26:35 upstairs kernel: usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 8 05:26:35 upstairs kernel: usb usb8: Product: UHCI Host Controller Jun 8 05:26:35 upstairs kernel: usb usb8: Manufacturer: Linux 2.6.26-rc5-git2 uhci_hcd Jun 8 05:26:35 upstairs kernel: usb usb8: SerialNumber: 0000:02:09.0 Jun 8 05:26:35 upstairs kernel: driver: '0000:02:09.0': driver_bound: bound to device 'uhci_hcd' Jun 8 05:26:35 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:09.0 to driver uhci_hcd Jun 8 05:26:35 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:09.1 with driver uhci_hcd Jun 8 05:26:35 upstairs kernel: bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:02:09.1 Jun 8 05:26:35 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 18 (level, low) -> IRQ 18 Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.1: UHCI Host Controller Jun 8 05:26:35 upstairs kernel: device: 'usb_host9': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usb_host9 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '009' Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 9 Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.1: detected 2 ports Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.1: uhci_check_and_reset_hc: cmd = 0x0000 Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.1: Performing full reset Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.1: irq 18, io base 0x0000e800 Jun 8 05:26:35 upstairs kernel: usb usb9: default language 0x0409 Jun 8 05:26:35 upstairs kernel: device: 'usb9': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device usb9 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:usb9 Jun 8 05:26:35 upstairs kernel: usb usb9: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb9 with driver usb Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb9 Jun 8 05:26:35 upstairs kernel: usb usb9: usb_probe_device Jun 8 05:26:35 upstairs kernel: usb usb9: configuration #1 chosen from 1 choice Jun 8 05:26:35 upstairs kernel: usb usb9: adding 9-0:1.0 (config #1, interface 0) Jun 8 05:26:35 upstairs kernel: device: '9-0:1.0': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device 9-0:1.0 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:9-0:1.0 Jun 8 05:26:35 upstairs kernel: usb 9-0:1.0: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device 9-0:1.0 with driver hub Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 9-0:1.0 Jun 8 05:26:35 upstairs kernel: hub 9-0:1.0: usb_probe_interface Jun 8 05:26:35 upstairs kernel: hub 9-0:1.0: usb_probe_interface - got id Jun 8 05:26:35 upstairs kernel: hub 9-0:1.0: USB hub found Jun 8 05:26:35 upstairs kernel: hub 9-0:1.0: 2 ports detected Jun 8 05:26:35 upstairs kernel: hub 9-0:1.0: standalone hub Jun 8 05:26:35 upstairs kernel: hub 9-0:1.0: no power switching (usb 1.0) Jun 8 05:26:35 upstairs kernel: hub 9-0:1.0: individual port over-current protection Jun 8 05:26:35 upstairs kernel: hub 9-0:1.0: power on to power good time: 2ms Jun 8 05:26:35 upstairs kernel: hub 9-0:1.0: local power source is good Jun 8 05:26:35 upstairs kernel: hub 9-0:1.0: trying to enable port power on non-switchable hub Jun 8 05:26:35 upstairs kernel: usb 2-2: default language 0x0409 Jun 8 05:26:35 upstairs kernel: device: '2-2': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device 2-2 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:2-2 Jun 8 05:26:35 upstairs kernel: usb 2-2: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device 2-2 with driver usb Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device 2-2 Jun 8 05:26:35 upstairs kernel: usb 2-2: usb_probe_device Jun 8 05:26:35 upstairs kernel: usb 2-2: configuration #1 chosen from 1 choice Jun 8 05:26:35 upstairs kernel: usb 2-2: adding 2-2:1.0 (config #1, interface 0) Jun 8 05:26:35 upstairs kernel: device: '2-2:1.0': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device 2-2:1.0 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:2-2:1.0 Jun 8 05:26:35 upstairs kernel: usb 2-2:1.0: uevent Jun 8 05:26:35 upstairs kernel: device: 'usbdev2.3_ep81': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev2.3_ep81 Jun 8 05:26:35 upstairs kernel: device: 'usbdev2.3_ep02': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev2.3_ep02 Jun 8 05:26:35 upstairs kernel: device: 'usbdev2.3_ep83': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev2.3_ep83 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '003' Jun 8 05:26:35 upstairs kernel: driver: '2-2': driver_bound: bound to device 'usb' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device 2-2 to driver usb Jun 8 05:26:35 upstairs kernel: device: 'usbdev2.3_ep00': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev2.3_ep00 Jun 8 05:26:35 upstairs kernel: usb 2-2: New USB device found, idVendor=06bd, idProduct=2061 Jun 8 05:26:35 upstairs kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 8 05:26:35 upstairs kernel: usb 2-2: Product: SNAPSCAN Jun 8 05:26:35 upstairs kernel: usb 2-2: Manufacturer: AGFA Jun 8 05:26:35 upstairs kernel: hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:00:1d.1: port 2 portsc 01a3,00 Jun 8 05:26:35 upstairs kernel: hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s Jun 8 05:26:35 upstairs kernel: driver: '9-0:1.0': driver_bound: bound to device 'hub' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device 9-0:1.0 to driver hub Jun 8 05:26:35 upstairs kernel: device: 'usbdev9.1_ep81': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev9.1_ep81 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '001' Jun 8 05:26:35 upstairs kernel: driver: 'usb9': driver_bound: bound to device 'usb' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device usb9 to driver usb Jun 8 05:26:35 upstairs kernel: device: 'usbdev9.1_ep00': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev9.1_ep00 Jun 8 05:26:35 upstairs kernel: usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 Jun 8 05:26:35 upstairs kernel: usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 8 05:26:35 upstairs kernel: usb usb9: Product: UHCI Host Controller Jun 8 05:26:35 upstairs kernel: usb usb9: Manufacturer: Linux 2.6.26-rc5-git2 uhci_hcd Jun 8 05:26:35 upstairs kernel: usb usb9: SerialNumber: 0000:02:09.1 Jun 8 05:26:35 upstairs kernel: driver: '0000:02:09.1': driver_bound: bound to device 'uhci_hcd' Jun 8 05:26:35 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:09.1 to driver uhci_hcd Jun 8 05:26:35 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:09.2 with driver ehci_hcd Jun 8 05:26:35 upstairs kernel: bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:02:09.2 Jun 8 05:26:35 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.2[C] -> GSI 19 (level, low) -> IRQ 19 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: EHCI Host Controller Jun 8 05:26:35 upstairs kernel: device: 'usb_host10': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usb_host10 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '010' Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 10 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: reset hcc_params 6872 thresh 7 uframes 256/512/1024 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: MWI active Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: supports USB remote wakeup Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: irq 19, io mem 0xfbfffc00 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: init command 010009 (park)=0 ithresh=1 period=256 RUN Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Jun 8 05:26:35 upstairs kernel: usb usb10: default language 0x0409 Jun 8 05:26:35 upstairs kernel: device: 'usb10': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device usb10 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:usb10 Jun 8 05:26:35 upstairs kernel: usb usb10: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb10 with driver usb Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb10 Jun 8 05:26:35 upstairs kernel: usb usb10: usb_probe_device Jun 8 05:26:35 upstairs kernel: usb usb10: configuration #1 chosen from 1 choice Jun 8 05:26:35 upstairs kernel: usb usb10: adding 10-0:1.0 (config #1, interface 0) Jun 8 05:26:35 upstairs kernel: device: '10-0:1.0': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device 10-0:1.0 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:10-0:1.0 Jun 8 05:26:35 upstairs kernel: usb 10-0:1.0: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device 10-0:1.0 with driver hub Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 10-0:1.0 Jun 8 05:26:35 upstairs kernel: hub 10-0:1.0: usb_probe_interface Jun 8 05:26:35 upstairs kernel: hub 10-0:1.0: usb_probe_interface - got id Jun 8 05:26:35 upstairs kernel: hub 10-0:1.0: USB hub found Jun 8 05:26:35 upstairs kernel: hub 10-0:1.0: 4 ports detected Jun 8 05:26:35 upstairs kernel: hub 10-0:1.0: standalone hub Jun 8 05:26:35 upstairs kernel: hub 10-0:1.0: no power switching (usb 1.0) Jun 8 05:26:35 upstairs kernel: hub 10-0:1.0: individual port over-current protection Jun 8 05:26:35 upstairs kernel: hub 10-0:1.0: power on to power good time: 20ms Jun 8 05:26:35 upstairs kernel: hub 10-0:1.0: local power source is good Jun 8 05:26:35 upstairs kernel: hub 10-0:1.0: trying to enable port power on non-switchable hub Jun 8 05:26:35 upstairs kernel: hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 Jun 8 05:26:35 upstairs kernel: driver: '10-0:1.0': driver_bound: bound to device 'hub' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device 10-0:1.0 to driver hub Jun 8 05:26:35 upstairs kernel: device: 'usbdev10.1_ep81': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev10.1_ep81 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '001' Jun 8 05:26:35 upstairs kernel: driver: 'usb10': driver_bound: bound to device 'usb' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device usb10 to driver usb Jun 8 05:26:35 upstairs kernel: device: 'usbdev10.1_ep00': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev10.1_ep00 Jun 8 05:26:35 upstairs kernel: usb usb10: New USB device found, idVendor=1d6b, idProduct=0002 Jun 8 05:26:35 upstairs kernel: usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 8 05:26:35 upstairs kernel: usb usb10: Product: EHCI Host Controller Jun 8 05:26:35 upstairs kernel: usb usb10: Manufacturer: Linux 2.6.26-rc5-git2 ehci_hcd Jun 8 05:26:35 upstairs kernel: usb usb10: SerialNumber: 0000:02:09.2 Jun 8 05:26:35 upstairs kernel: driver: '0000:02:09.2': driver_bound: bound to device 'ehci_hcd' Jun 8 05:26:35 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:09.2 to driver ehci_hcd Jun 8 05:26:35 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:0a.2 with driver ehci_hcd Jun 8 05:26:35 upstairs kernel: bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:02:0a.2 Jun 8 05:26:35 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.2[C] -> GSI 23 (level, low) -> IRQ 23 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: EHCI Host Controller Jun 8 05:26:35 upstairs kernel: device: 'usb_host11': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usb_host11 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '011' Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: new USB bus registered, assigned bus number 11 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: reset portroute 1 0 1 0 0 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: reset hcc_params 0002 thresh 0 uframes 256/512/1024 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: ...powerup ports... Jun 8 05:26:35 upstairs kernel: usb 3-2: new low speed USB device using uhci_hcd and address 3 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: MWI active Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: supports USB remote wakeup Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: irq 23, io mem 0xfbfff800 Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: init command 010009 (park)=0 ithresh=1 period=256 RUN Jun 8 05:26:35 upstairs kernel: ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 Jun 8 05:26:35 upstairs kernel: usb usb11: default language 0x0409 Jun 8 05:26:35 upstairs kernel: device: 'usb11': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device usb11 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:usb11 Jun 8 05:26:35 upstairs kernel: usb usb11: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb11 with driver usb Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb11 Jun 8 05:26:35 upstairs kernel: usb usb11: usb_probe_device Jun 8 05:26:35 upstairs kernel: usb usb11: configuration #1 chosen from 1 choice Jun 8 05:26:35 upstairs kernel: usb usb11: adding 11-0:1.0 (config #1, interface 0) Jun 8 05:26:35 upstairs kernel: device: '11-0:1.0': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device 11-0:1.0 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:11-0:1.0 Jun 8 05:26:35 upstairs kernel: usb 11-0:1.0: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device 11-0:1.0 with driver hub Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 11-0:1.0 Jun 8 05:26:35 upstairs kernel: hub 11-0:1.0: usb_probe_interface Jun 8 05:26:35 upstairs kernel: hub 11-0:1.0: usb_probe_interface - got id Jun 8 05:26:35 upstairs kernel: hub 11-0:1.0: USB hub found Jun 8 05:26:35 upstairs kernel: hub 11-0:1.0: 5 ports detected Jun 8 05:26:35 upstairs kernel: hub 11-0:1.0: standalone hub Jun 8 05:26:35 upstairs kernel: hub 11-0:1.0: individual port power switching Jun 8 05:26:35 upstairs kernel: hub 11-0:1.0: individual port over-current protection Jun 8 05:26:35 upstairs kernel: hub 11-0:1.0: power on to power good time: 20ms Jun 8 05:26:35 upstairs kernel: hub 11-0:1.0: local power source is good Jun 8 05:26:35 upstairs kernel: hub 11-0:1.0: enabling power on all ports Jun 8 05:26:35 upstairs kernel: usb 3-2: skipped 1 descriptor after interface Jun 8 05:26:35 upstairs kernel: usb 3-2: skipped 1 descriptor after interface Jun 8 05:26:35 upstairs kernel: usb 3-2: default language 0x0409 Jun 8 05:26:35 upstairs kernel: device: '3-2': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device 3-2 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:3-2 Jun 8 05:26:35 upstairs kernel: usb 3-2: uevent Jun 8 05:26:35 upstairs kernel: bus: 'usb': driver_probe_device: matched device 3-2 with driver usb Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device 3-2 Jun 8 05:26:35 upstairs kernel: usb 3-2: usb_probe_device Jun 8 05:26:35 upstairs kernel: usb 3-2: configuration #1 chosen from 1 choice Jun 8 05:26:35 upstairs kernel: usb 3-2: adding 3-2:1.0 (config #1, interface 0) Jun 8 05:26:35 upstairs kernel: device: '3-2:1.0': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device 3-2:1.0 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:3-2:1.0 Jun 8 05:26:35 upstairs kernel: usb 3-2:1.0: uevent Jun 8 05:26:35 upstairs kernel: device: 'usbdev3.3_ep81': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev3.3_ep81 Jun 8 05:26:35 upstairs kernel: usb 3-2: adding 3-2:1.1 (config #1, interface 1) Jun 8 05:26:35 upstairs kernel: device: '3-2:1.1': device_add Jun 8 05:26:35 upstairs kernel: bus: 'usb': add device 3-2:1.1 Jun 8 05:26:35 upstairs kernel: PM: Adding info for usb:3-2:1.1 Jun 8 05:26:35 upstairs kernel: usb 3-2:1.1: uevent Jun 8 05:26:35 upstairs kernel: device: 'usbdev3.3_ep82': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev3.3_ep82 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '003' Jun 8 05:26:35 upstairs kernel: driver: '3-2': driver_bound: bound to device 'usb' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device 3-2 to driver usb Jun 8 05:26:35 upstairs kernel: device: 'usbdev3.3_ep00': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev3.3_ep00 Jun 8 05:26:35 upstairs kernel: usb 3-2: New USB device found, idVendor=045e, idProduct=00f1 Jun 8 05:26:35 upstairs kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 8 05:26:35 upstairs kernel: usb 3-2: Product: Microsoft Wireless Desktop Receiver 3.1A Jun 8 05:26:35 upstairs kernel: usb 3-2: Manufacturer: Microsft Jun 8 05:26:35 upstairs kernel: hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0006 Jun 8 05:26:35 upstairs kernel: uhci_hcd 0000:02:09.0: port 1 portsc 009a,00 Jun 8 05:26:35 upstairs kernel: hub 8-0:1.0: port 1, status 0100, change 0003, 12 Mb/s Jun 8 05:26:35 upstairs kernel: ohci_hcd 0000:02:0a.0: urb f71cb680 path 2 ep1in 5f160000 cc 5 --> status -62 Jun 8 05:26:35 upstairs kernel: hub 1-2:1.0: transfer --> -62 Jun 8 05:26:35 upstairs kernel: driver: '11-0:1.0': driver_bound: bound to device 'hub' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device 11-0:1.0 to driver hub Jun 8 05:26:35 upstairs kernel: device: 'usbdev11.1_ep81': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev11.1_ep81 Jun 8 05:26:35 upstairs kernel: drivers/usb/core/inode.c: creating file '001' Jun 8 05:26:35 upstairs kernel: driver: 'usb11': driver_bound: bound to device 'usb' Jun 8 05:26:35 upstairs kernel: bus: 'usb': really_probe: bound device usb11 to driver usb Jun 8 05:26:35 upstairs kernel: device: 'usbdev11.1_ep00': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:usbdev11.1_ep00 Jun 8 05:26:35 upstairs kernel: usb usb11: New USB device found, idVendor=1d6b, idProduct=0002 Jun 8 05:26:35 upstairs kernel: usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 8 05:26:35 upstairs kernel: usb usb11: Product: EHCI Host Controller Jun 8 05:26:35 upstairs kernel: usb usb11: Manufacturer: Linux 2.6.26-rc5-git2 ehci_hcd Jun 8 05:26:35 upstairs kernel: usb usb11: SerialNumber: 0000:02:0a.2 Jun 8 05:26:35 upstairs kernel: driver: '0000:02:0a.2': driver_bound: bound to device 'ehci_hcd' Jun 8 05:26:35 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:0a.2 to driver ehci_hcd Jun 8 05:26:35 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:0b.0 with driver ohci1394 Jun 8 05:26:35 upstairs kernel: bus: 'pci': really_probe: probing driver ohci1394 with device 0000:02:0b.0 Jun 8 05:26:35 upstairs kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 22 Jun 8 05:26:35 upstairs kernel: device: 'fw-host0': device_add Jun 8 05:26:35 upstairs kernel: bus: 'ieee1394': add device fw-host0 Jun 8 05:26:35 upstairs kernel: PM: Adding info for ieee1394:fw-host0 Jun 8 05:26:35 upstairs kernel: driver: 'fw-host0': driver_bound: bound to device 'nodemgr' Jun 8 05:26:35 upstairs kernel: device: 'fw-host0': device_add Jun 8 05:26:35 upstairs kernel: PM: Adding info for No Bus:fw-host0 Jun 8 05:26:35 upstairs kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] Jun 8 05:26:35 upstairs kernel: ohci_hcd 0000:02:0a.0: urb f71cb680 path 2 ep1in 5e160000 cc 5 --> status -62 Jun 8 05:26:35 upstairs kernel: hub 1-2:1.0: transfer --> -62 Jun 8 05:27:08 upstairs kernel: driver: '0000:02:0b.0': driver_bound: bound to device 'ohci1394' Jun 8 05:27:08 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:0b.0 to driver ohci1394 Jun 8 05:27:08 upstairs kernel: hub 8-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 Jun 8 05:27:08 upstairs kernel: uhci_hcd 0000:02:09.0: port 2 portsc 018a,00 Jun 8 05:27:08 upstairs kernel: hub 8-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s Jun 8 05:27:08 upstairs kernel: bus: 'usb': add driver usbhid Jun 8 05:27:08 upstairs kernel: ohci_hcd 0000:02:0a.0: urb f71cb680 path 2 ep1in 5f160000 cc 5 --> status -62 Jun 8 05:27:08 upstairs kernel: hub 1-2:1.0: transfer --> -62 Jun 8 05:27:08 upstairs kernel: hub 8-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300 Jun 8 05:27:08 upstairs kernel: hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0006 Jun 8 05:27:08 upstairs kernel: uhci_hcd 0000:02:09.1: port 1 portsc 018a,00 Jun 8 05:27:08 upstairs kernel: hub 9-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s Jun 8 05:27:08 upstairs kernel: ohci_hcd 0000:02:0a.0: urb f71cb680 path 2 ep1in 5e160000 cc 5 --> status -62 Jun 8 05:27:08 upstairs kernel: hub 1-2:1.0: transfer --> -62 Jun 8 05:27:08 upstairs kernel: hub 9-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 Jun 8 05:27:08 upstairs kernel: uhci_hcd 0000:02:09.1: port 2 portsc 008a,00 Jun 8 05:27:08 upstairs kernel: hub 9-0:1.0: port 2, status 0100, change 0003, 12 Mb/s Jun 8 05:27:08 upstairs kernel: ohci_hcd 0000:02:0a.0: urb f71cb680 path 2 ep1in 5f160000 cc 5 --> status -62 Jun 8 05:27:08 upstairs kernel: hub 1-2:1.0: transfer --> -62 Jun 8 05:27:08 upstairs kernel: hub 9-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 Jun 8 05:27:08 upstairs kernel: hub 10-0:1.0: state 7 ports 4 chg 0000 evt 0000 Jun 8 05:27:08 upstairs kernel: ehci_hcd 0000:02:09.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT Jun 8 05:27:08 upstairs kernel: hub 10-0:1.0: port 1, status 0501, change 0001, 480 Mb/s Jun 8 05:27:08 upstairs kernel: ohci_hcd 0000:02:0a.0: urb f71cb680 path 2 ep1in 5e160000 cc 5 --> status -62 Jun 8 05:27:08 upstairs kernel: hub 1-2:1.0: transfer --> -62 Jun 8 05:27:08 upstairs kernel: hub 10-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 Jun 8 05:27:08 upstairs kernel: ehci_hcd 0000:02:09.2: port 1 high speed Jun 8 05:27:08 upstairs kernel: ehci_hcd 0000:02:09.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT Jun 8 05:27:08 upstairs kernel: ohci_hcd 0000:02:0a.0: urb f71cb680 path 2 ep1in 5f160000 cc 5 --> status -62 Jun 8 05:27:08 upstairs kernel: hub 1-2:1.0: transfer --> -62 Jun 8 05:27:08 upstairs kernel: usb 10-1: new high speed USB device using ehci_hcd and address 2 Jun 8 05:27:08 upstairs kernel: usb 10-1: default language 0x0409 Jun 8 05:27:08 upstairs kernel: device: '10-1': device_add Jun 8 05:27:08 upstairs kernel: bus: 'usb': add device 10-1 Jun 8 05:27:08 upstairs kernel: PM: Adding info for usb:10-1 Jun 8 05:27:08 upstairs kernel: usb 10-1: uevent Jun 8 05:27:08 upstairs kernel: bus: 'usb': driver_probe_device: matched device 10-1 with driver usb Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device 10-1 Jun 8 05:27:08 upstairs kernel: usb 10-1: usb_probe_device Jun 8 05:27:08 upstairs kernel: usb 10-1: configuration #1 chosen from 1 choice Jun 8 05:27:08 upstairs kernel: usb 10-1: adding 10-1:1.0 (config #1, interface 0) Jun 8 05:27:08 upstairs kernel: device: '10-1:1.0': device_add Jun 8 05:27:08 upstairs kernel: bus: 'usb': add device 10-1:1.0 Jun 8 05:27:08 upstairs kernel: PM: Adding info for usb:10-1:1.0 Jun 8 05:27:08 upstairs kernel: usb 10-1:1.0: uevent Jun 8 05:27:08 upstairs kernel: device: 'usbdev10.2_ep01': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:usbdev10.2_ep01 Jun 8 05:27:08 upstairs kernel: device: 'usbdev10.2_ep81': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:usbdev10.2_ep81 Jun 8 05:27:08 upstairs kernel: device: 'usbdev10.2_ep82': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:usbdev10.2_ep82 Jun 8 05:27:08 upstairs kernel: device: 'usbdev10.2_ep83': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:usbdev10.2_ep83 Jun 8 05:27:08 upstairs kernel: drivers/usb/core/inode.c: creating file '002' Jun 8 05:27:08 upstairs kernel: driver: '10-1': driver_bound: bound to device 'usb' Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: bound device 10-1 to driver usb Jun 8 05:27:08 upstairs kernel: device: 'usbdev10.2_ep00': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:usbdev10.2_ep00 Jun 8 05:27:08 upstairs kernel: usb 10-1: New USB device found, idVendor=2040, idProduct=9950 Jun 8 05:27:08 upstairs kernel: usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 8 05:27:08 upstairs kernel: usb 10-1: Product: WinTV Nova-DT Jun 8 05:27:08 upstairs kernel: usb 10-1: Manufacturer: Hauppauge Jun 8 05:27:08 upstairs kernel: usb 10-1: SerialNumber: 4030248054 Jun 8 05:27:08 upstairs kernel: hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004 Jun 8 05:27:08 upstairs kernel: ohci_hcd 0000:02:0a.0: GetStatus roothub.portstatus [1] = 0x00030100 PESC CSC PPS Jun 8 05:27:08 upstairs kernel: bus: 'usb': driver_probe_device: matched device 3-2:1.0 with driver usbhid Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: probing driver usbhid with device 3-2:1.0 Jun 8 05:27:08 upstairs kernel: hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s Jun 8 05:27:08 upstairs kernel: usbhid 3-2:1.0: usb_probe_interface Jun 8 05:27:08 upstairs kernel: usb 1-2: USB disconnect, address 2 Jun 8 05:27:08 upstairs kernel: usb 1-2: unregistering device Jun 8 05:27:08 upstairs kernel: usb 1-2: usb_disable_device nuking all URBs Jun 8 05:27:08 upstairs kernel: ohci_hcd 0000:02:0a.0: shutdown urb f71cb680 ep1in-intr Jun 8 05:27:08 upstairs kernel: usbhid 3-2:1.0: usb_probe_interface - got id Jun 8 05:27:08 upstairs kernel: usb 1-2: unregistering interface 1-2:1.0 Jun 8 05:27:08 upstairs kernel: PM: Removing info for usb:1-2:1.0 Jun 8 05:27:08 upstairs kernel: bus: 'usb': remove device 1-2:1.0 Jun 8 05:27:08 upstairs kernel: usb 1-2:1.0: uevent Jun 8 05:27:08 upstairs kernel: device: 'usbdev1.2_ep81': device_unregister Jun 8 05:27:08 upstairs kernel: PM: Removing info for No Bus:usbdev1.2_ep81 Jun 8 05:27:08 upstairs kernel: device: 'usbdev1.2_ep00': device_unregister Jun 8 05:27:08 upstairs kernel: PM: Removing info for No Bus:usbdev1.2_ep00 Jun 8 05:27:08 upstairs kernel: PM: Removing info for usb:1-2 Jun 8 05:27:08 upstairs kernel: bus: 'usb': remove device 1-2 Jun 8 05:27:08 upstairs kernel: usb 1-2: uevent Jun 8 05:27:08 upstairs kernel: device: 'input2': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:input2 Jun 8 05:27:08 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2 Jun 8 05:27:08 upstairs kernel: bus: 'i2c': registered Jun 8 05:27:08 upstairs kernel: device class 'i2c-adapter': registering Jun 8 05:27:08 upstairs kernel: bus: 'i2c': add driver dummy Jun 8 05:27:08 upstairs kernel: uhci_hcd 0000:00:1d.1: reserve dev 3 ep81-INT, period 8, phase 4, 118 us Jun 8 05:27:08 upstairs kernel: device: 'event2': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:event2 Jun 8 05:27:08 upstairs kernel: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2 Jun 8 05:27:08 upstairs kernel: driver: '3-2:1.0': driver_bound: bound to device 'usbhid' Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: bound device 3-2:1.0 to driver usbhid Jun 8 05:27:08 upstairs kernel: bus: 'usb': driver_probe_device: matched device 3-2:1.1 with driver usbhid Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: probing driver usbhid with device 3-2:1.1 Jun 8 05:27:08 upstairs kernel: usbhid 3-2:1.1: usb_probe_interface Jun 8 05:27:08 upstairs kernel: usbhid 3-2:1.1: usb_probe_interface - got id Jun 8 05:27:08 upstairs kernel: device class 'firmware': registering Jun 8 05:27:08 upstairs kernel: device class 'dvb': registering Jun 8 05:27:08 upstairs kernel: dib0700: loaded with support for 7 different device-types Jun 8 05:27:08 upstairs kernel: bus: 'usb': add driver dvb_usb_dib0700 Jun 8 05:27:08 upstairs kernel: hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 Jun 8 05:27:08 upstairs kernel: hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jun 8 05:27:08 upstairs kernel: hub 11-0:1.0: state 7 ports 5 chg 0000 evt 0000 Jun 8 05:27:08 upstairs kernel: ehci_hcd 0000:02:0a.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT Jun 8 05:27:08 upstairs kernel: hub 11-0:1.0: port 3, status 0501, change 0001, 480 Mb/s Jun 8 05:27:08 upstairs kernel: ohci_hcd 0000:02:0a.1: auto-stop root hub Jun 8 05:27:08 upstairs kernel: device: 'input3': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:input3 Jun 8 05:27:08 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input3 Jun 8 05:27:08 upstairs kernel: uhci_hcd 0000:00:1d.1: reserve dev 3 ep82-INT, period 8, phase 4, 118 us Jun 8 05:27:08 upstairs kernel: device: 'mouse0': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:mouse0 Jun 8 05:27:08 upstairs kernel: device: 'event3': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:event3 Jun 8 05:27:08 upstairs kernel: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2 Jun 8 05:27:08 upstairs kernel: driver: '3-2:1.1': driver_bound: bound to device 'usbhid' Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: bound device 3-2:1.1 to driver usbhid Jun 8 05:27:08 upstairs kernel: hub 11-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 Jun 8 05:27:08 upstairs kernel: ehci_hcd 0000:02:0a.2: port 3 high speed Jun 8 05:27:08 upstairs kernel: ehci_hcd 0000:02:0a.2: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT Jun 8 05:27:08 upstairs kernel: usb 11-3: new high speed USB device using ehci_hcd and address 2 Jun 8 05:27:08 upstairs kernel: device: '11-3': device_add Jun 8 05:27:08 upstairs kernel: bus: 'usb': add device 11-3 Jun 8 05:27:08 upstairs kernel: PM: Adding info for usb:11-3 Jun 8 05:27:08 upstairs kernel: usb 11-3: uevent Jun 8 05:27:08 upstairs kernel: bus: 'usb': driver_probe_device: matched device 11-3 with driver usb Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device 11-3 Jun 8 05:27:08 upstairs kernel: usb 11-3: usb_probe_device Jun 8 05:27:08 upstairs kernel: usb 11-3: configuration #1 chosen from 1 choice Jun 8 05:27:08 upstairs kernel: usb 11-3: adding 11-3:1.0 (config #1, interface 0) Jun 8 05:27:08 upstairs kernel: device: '11-3:1.0': device_add Jun 8 05:27:08 upstairs kernel: bus: 'usb': add device 11-3:1.0 Jun 8 05:27:08 upstairs kernel: PM: Adding info for usb:11-3:1.0 Jun 8 05:27:08 upstairs kernel: usb 11-3:1.0: uevent Jun 8 05:27:08 upstairs kernel: bus: 'usb': driver_probe_device: matched device 11-3:1.0 with driver hub Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 11-3:1.0 Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: usb_probe_interface Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: usb_probe_interface - got id Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: USB hub found Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: 4 ports detected Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: standalone hub Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: ganged power switching Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: global over-current protection Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: Single TT Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: TT requires at most 16 FS bit times (1332 ns) Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: Port indicators are supported Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: power on to power good time: 100ms Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: local power source is good Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: no over-current condition exists Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: enabling power on all ports Jun 8 05:27:08 upstairs kernel: usb 11-3: link qh256-0001/f77ef100 start 255 [1/0 us] Jun 8 05:27:08 upstairs kernel: driver: '11-3:1.0': driver_bound: bound to device 'hub' Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: bound device 11-3:1.0 to driver hub Jun 8 05:27:08 upstairs kernel: device: 'usbdev11.2_ep81': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:usbdev11.2_ep81 Jun 8 05:27:08 upstairs kernel: drivers/usb/core/inode.c: creating file '002' Jun 8 05:27:08 upstairs kernel: driver: '11-3': driver_bound: bound to device 'usb' Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: bound device 11-3 to driver usb Jun 8 05:27:08 upstairs kernel: device: 'usbdev11.2_ep00': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:usbdev11.2_ep00 Jun 8 05:27:08 upstairs kernel: usb 11-3: New USB device found, idVendor=0409, idProduct=0059 Jun 8 05:27:08 upstairs kernel: usb 11-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 8 05:27:08 upstairs kernel: hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jun 8 05:27:08 upstairs kernel: hub 11-3:1.0: state 7 ports 4 chg 0000 evt 0000 Jun 8 05:27:08 upstairs kernel: bus: 'usb': driver_probe_device: matched device 10-1:1.0 with driver dvb_usb_dib0700 Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: probing driver dvb_usb_dib0700 with device 10-1:1.0 Jun 8 05:27:08 upstairs kernel: dvb_usb_dib0700 10-1:1.0: usb_probe_interface Jun 8 05:27:08 upstairs kernel: dvb_usb_dib0700 10-1:1.0: usb_probe_interface - got id Jun 8 05:27:08 upstairs kernel: dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. Jun 8 05:27:08 upstairs kernel: device: 'i2c-0': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:i2c-0 Jun 8 05:27:08 upstairs kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jun 8 05:27:08 upstairs kernel: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) Jun 8 05:27:08 upstairs kernel: device: 'dvb0.demux0': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:dvb0.demux0 Jun 8 05:27:08 upstairs kernel: device: 'dvb0.dvr0': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:dvb0.dvr0 Jun 8 05:27:08 upstairs kernel: device: 'dvb0.net0': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:dvb0.net0 Jun 8 05:27:08 upstairs kernel: usbcore: registered new interface driver usbhid Jun 8 05:27:08 upstairs kernel: usbhid: v2.6:USB HID core driver Jun 8 05:27:08 upstairs kernel: device: 'i2c-1': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:i2c-1 Jun 8 05:27:08 upstairs kernel: DVB: registering frontend 0 (DiBcom 3000MC/P)... Jun 8 05:27:08 upstairs kernel: device: 'dvb0.frontend0': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:dvb0.frontend0 Jun 8 05:27:08 upstairs kernel: MT2060: successfully identified (IF1 = 1230) Jun 8 05:27:08 upstairs kernel: usb usb8: suspend_rh (auto-stop) Jun 8 05:27:08 upstairs kernel: device: '00110666000013cc': device_add Jun 8 05:27:08 upstairs kernel: bus: 'ieee1394': add device 00110666000013cc Jun 8 05:27:08 upstairs kernel: PM: Adding info for ieee1394:00110666000013cc Jun 8 05:27:08 upstairs kernel: device: '00110666000013cc': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:00110666000013cc Jun 8 05:27:08 upstairs kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666000013cc] Jun 8 05:27:08 upstairs kernel: usb usb9: suspend_rh (auto-stop) Jun 8 05:27:08 upstairs kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jun 8 05:27:08 upstairs kernel: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) Jun 8 05:27:08 upstairs kernel: device: 'dvb1.demux0': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:dvb1.demux0 Jun 8 05:27:08 upstairs kernel: device: 'dvb1.dvr0': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:dvb1.dvr0 Jun 8 05:27:08 upstairs kernel: device: 'dvb1.net0': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:dvb1.net0 Jun 8 05:27:08 upstairs kernel: device: 'i2c-2': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:i2c-2 Jun 8 05:27:08 upstairs kernel: DVB: registering frontend 1 (DiBcom 3000MC/P)... Jun 8 05:27:08 upstairs kernel: device: 'dvb1.frontend0': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:dvb1.frontend0 Jun 8 05:27:08 upstairs kernel: MT2060: successfully identified (IF1 = 1234) Jun 8 05:27:08 upstairs kernel: ohci_hcd 0000:02:0a.0: auto-stop root hub Jun 8 05:27:08 upstairs kernel: device: 'input4': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:input4 Jun 8 05:27:08 upstairs kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:09.2/usb10/10-1/input/input4 Jun 8 05:27:08 upstairs kernel: device: 'event4': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:event4 Jun 8 05:27:08 upstairs kernel: dvb-usb: schedule remote query interval to 150 msecs. Jun 8 05:27:08 upstairs kernel: dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. Jun 8 05:27:08 upstairs kernel: driver: '10-1:1.0': driver_bound: bound to device 'dvb_usb_dib0700' Jun 8 05:27:08 upstairs kernel: bus: 'usb': really_probe: bound device 10-1:1.0 to driver dvb_usb_dib0700 Jun 8 05:27:08 upstairs kernel: usbcore: registered new interface driver dvb_usb_dib0700 Jun 8 05:27:08 upstairs kernel: fuse init (API version 7.9) Jun 8 05:27:08 upstairs kernel: device: 'fuse': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:fuse Jun 8 05:27:08 upstairs kernel: device: '8:1-fuseblk': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:8:1-fuseblk Jun 8 05:27:08 upstairs kernel: kjournald starting. Commit interval 5 seconds Jun 8 05:27:08 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended Jun 8 05:27:08 upstairs kernel: EXT3 FS on sdb6, internal journal Jun 8 05:27:08 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 8 05:27:08 upstairs kernel: kjournald starting. Commit interval 5 seconds Jun 8 05:27:08 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended Jun 8 05:27:08 upstairs kernel: EXT3 FS on sda6, internal journal Jun 8 05:27:08 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 8 05:27:08 upstairs kernel: kjournald starting. Commit interval 5 seconds Jun 8 05:27:08 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended Jun 8 05:27:08 upstairs kernel: EXT3 FS on sda7, internal journal Jun 8 05:27:08 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 8 05:27:08 upstairs kernel: kjournald starting. Commit interval 5 seconds Jun 8 05:27:08 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended Jun 8 05:27:08 upstairs kernel: EXT3 FS on sdc2, internal journal Jun 8 05:27:08 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 8 05:27:08 upstairs kernel: Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k Jun 8 05:27:08 upstairs kernel: device: 'vcs1': device_unregister Jun 8 05:27:08 upstairs kernel: PM: Removing info for No Bus:vcs1 Jun 8 05:27:08 upstairs kernel: device: 'vcs1': device_create_release Jun 8 05:27:08 upstairs kernel: device: 'vcsa1': device_unregister Jun 8 05:27:08 upstairs kernel: PM: Removing info for No Bus:vcsa1 Jun 8 05:27:08 upstairs kernel: device: 'vcsa1': device_create_release Jun 8 05:27:08 upstairs kernel: device: 'vcs1': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:vcs1 Jun 8 05:27:08 upstairs kernel: device: 'vcsa1': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:vcsa1 Jun 8 05:27:08 upstairs kernel: device: 'vcs1': device_unregister Jun 8 05:27:08 upstairs kernel: PM: Removing info for No Bus:vcs1 Jun 8 05:27:08 upstairs kernel: device: 'vcs1': device_create_release Jun 8 05:27:08 upstairs kernel: device: 'vcsa1': device_unregister Jun 8 05:27:08 upstairs kernel: PM: Removing info for No Bus:vcsa1 Jun 8 05:27:08 upstairs kernel: device: 'vcsa1': device_create_release Jun 8 05:27:08 upstairs kernel: device: 'vcs1': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:vcs1 Jun 8 05:27:08 upstairs kernel: device: 'vcsa1': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:vcsa1 Jun 8 05:27:08 upstairs kernel: device: 'vcs1': device_unregister Jun 8 05:27:08 upstairs kernel: PM: Removing info for No Bus:vcs1 Jun 8 05:27:08 upstairs kernel: device: 'vcs1': device_create_release Jun 8 05:27:08 upstairs kernel: device: 'vcsa1': device_unregister Jun 8 05:27:08 upstairs kernel: PM: Removing info for No Bus:vcsa1 Jun 8 05:27:08 upstairs kernel: device: 'vcsa1': device_create_release Jun 8 05:27:08 upstairs kernel: device: 'vcs1': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:vcs1 Jun 8 05:27:08 upstairs kernel: device: 'vcsa1': device_add Jun 8 05:27:08 upstairs kernel: PM: Adding info for No Bus:vcsa1 Jun 8 05:27:08 upstairs kernel: device: 'vcs1': device_unregister Jun 8 05:27:08 upstairs kernel: PM: Removing info for No Bus:vcs1 Jun 8 05:27:12 upstairs kernel: device: 'vcs1': device_create_release Jun 8 05:27:12 upstairs kernel: device: 'vcsa1': device_unregister Jun 8 05:27:12 upstairs kernel: PM: Removing info for No Bus:vcsa1 Jun 8 05:27:12 upstairs kernel: device: 'vcsa1': device_create_release Jun 8 05:27:12 upstairs kernel: device: 'vcs1': device_add Jun 8 05:27:12 upstairs kernel: PM: Adding info for No Bus:vcs1 Jun 8 05:27:12 upstairs kernel: device: 'vcsa1': device_add Jun 8 05:27:12 upstairs kernel: PM: Adding info for No Bus:vcsa1 Jun 8 05:27:12 upstairs kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Jun 8 05:27:12 upstairs kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Jun 8 05:27:12 upstairs kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Jun 8 05:27:12 upstairs kernel: bus: 'pci': remove driver parport_pc Jun 8 05:27:12 upstairs kernel: driver: 'parport_pc': driver_release Jun 8 05:27:12 upstairs kernel: bus: 'pnp': remove driver parport_pc Jun 8 05:27:12 upstairs kernel: parport_pc 00:06: disabled Jun 8 05:27:12 upstairs kernel: driver: 'parport_pc': driver_release Jun 8 05:27:12 upstairs kernel: pnp: the driver 'parport_pc' has been unregistered Jun 8 05:27:12 upstairs kernel: bus: 'platform': remove driver parport_pc Jun 8 05:27:12 upstairs kernel: driver: 'parport_pc': driver_release Jun 8 05:27:12 upstairs kernel: bus: 'pci': remove driver ohci1394 Jun 8 05:27:12 upstairs kernel: ieee1394: Node removed: ID:BUS[0-00:1023] GUID[00110666000013cc] Jun 8 05:27:12 upstairs kernel: device: '00110666000013cc': device_unregister Jun 8 05:27:12 upstairs kernel: PM: Removing info for No Bus:00110666000013cc Jun 8 05:27:12 upstairs kernel: device: '00110666000013cc': device_unregister Jun 8 05:27:12 upstairs kernel: PM: Removing info for ieee1394:00110666000013cc Jun 8 05:27:12 upstairs kernel: bus: 'ieee1394': remove device 00110666000013cc Jun 8 05:27:12 upstairs kernel: device: 'fw-host0': device_unregister Jun 8 05:27:12 upstairs kernel: PM: Removing info for No Bus:fw-host0 Jun 8 05:27:12 upstairs kernel: device: 'fw-host0': device_unregister Jun 8 05:27:12 upstairs kernel: PM: Removing info for ieee1394:fw-host0 Jun 8 05:27:12 upstairs kernel: bus: 'ieee1394': remove device fw-host0 Jun 8 05:27:12 upstairs kernel: driver: 'ohci1394': driver_release Jun 8 05:27:12 upstairs kernel: bus: 'ieee1394': remove driver nodemgr Jun 8 05:27:12 upstairs kernel: driver: 'nodemgr': driver_release Jun 8 05:27:12 upstairs kernel: device class 'ieee1394': unregistering Jun 8 05:27:12 upstairs kernel: class 'ieee1394': release. Jun 8 05:27:12 upstairs kernel: class 'ieee1394' does not have a release() function, be careful Jun 8 05:27:12 upstairs kernel: device class 'ieee1394_node': unregistering Jun 8 05:27:12 upstairs kernel: class 'ieee1394_node': release. Jun 8 05:27:12 upstairs kernel: class 'ieee1394_node' does not have a release() function, be careful Jun 8 05:27:12 upstairs kernel: device class 'ieee1394_protocol': unregistering Jun 8 05:27:12 upstairs kernel: class 'ieee1394_protocol': release. Jun 8 05:27:12 upstairs kernel: class_create_release called for ieee1394_protocol Jun 8 05:27:12 upstairs kernel: device class 'ieee1394_host': unregistering Jun 8 05:27:12 upstairs kernel: class 'ieee1394_host': release. Jun 8 05:27:12 upstairs kernel: class 'ieee1394_host' does not have a release() function, be careful Jun 8 05:27:12 upstairs kernel: bus: 'ieee1394': unregistering Jun 8 05:27:12 upstairs kernel: device: 'vcs4': device_add Jun 8 05:27:12 upstairs kernel: PM: Adding info for No Bus:vcs4 Jun 8 05:27:12 upstairs kernel: device: 'vcsa4': device_add Jun 8 05:27:12 upstairs kernel: PM: Adding info for No Bus:vcsa4 Jun 8 05:27:12 upstairs kernel: device: 'vcs3': device_add Jun 8 05:27:12 upstairs kernel: PM: Adding info for No Bus:vcs3 Jun 8 05:27:12 upstairs kernel: device: 'vcsa3': device_add Jun 8 05:27:12 upstairs kernel: PM: Adding info for No Bus:vcsa3 Jun 8 05:27:12 upstairs kernel: device: 'vcs2': device_add Jun 8 05:27:12 upstairs kernel: PM: Adding info for No Bus:vcs2 Jun 8 05:27:12 upstairs kernel: device: 'vcsa2': device_add Jun 8 05:27:12 upstairs kernel: PM: Adding info for No Bus:vcsa2 Jun 8 05:27:12 upstairs kernel: device: 'vcs5': device_add Jun 8 05:27:12 upstairs kernel: PM: Adding info for No Bus:vcs5 Jun 8 05:27:12 upstairs kernel: device: 'vcsa5': device_add Jun 8 05:27:12 upstairs kernel: PM: Adding info for No Bus:vcsa5
