On Friday 06 June 2008, James Bottomley wrote: > On Fri, 2008-06-06 at 06:07 +0000, Chris Clayton wrote: > > On Friday 06 June 2008, Andrew Morton wrote: > > > On Sun, 1 Jun 2008 04:15:05 +0000 Chris Clayton > > > <chris2553@xxxxxxxxxxxxxx> > > > > wrote: > > > > Hi, > > > > > > > > I've just started testing 2.6.26 on my desktop machine and have found > > > > that I get a long pause (20 seconds or so) as the system boots. By > > > > pause I mean that the boot messages that normally scroll by stop > > > > doing so for, as I say, about 20 seconds. > > > > > > > > I've done a bisect and arrived at: > > > > > > > > b0ed43360fdca227048d88a08290365cb681c1a8 is first bad commit > > > > commit b0ed43360fdca227048d88a08290365cb681c1a8 > > > > Author: Hannes Reinecke <hare@xxxxxxx> > > > > Date: Tue Mar 18 14:32:28 2008 +0100 > > > > > > > > [SCSI] add scsi_host and scsi_target to scsi_bus > > > > > > > > This patch implements scsi_host and scsi_target device types > > > > and adds both to the scsi_bus. > > > > > > > > Signed-off-by: Hannes Reinecke <hare@xxxxxxx> > > > > Signed-off-by: Kay Sievers <kay.sievers@xxxxxxxx> > > > > Signed-off-by: James Bottomley > > > > <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx> > > > > > > > > :040000 040000 4e3140909966b4c9aa987d34ee4078d283fe0351 > > > > > > > > 46e4fd28cc537ba700eb4f5652abf043fed4d76d M drivers > > > > > > > > The config file for that kernel is attached as are the kernel log for > > > > booting that kernel and the bisect log. > > > > > > > > I've also noticed that it takes much longer for icons to appear on my > > > > desktop when I plug a usb storage device in. (The icons are > > > > shown/hidden by a simple sctript that is run via udev when the device > > > > is > > > > attached/detached.) > > > > > > Do you believe that this is the same period? 20 seconds? > > > > Thanks for the reply, Andrew. I was beginning to think that I'd committed > > an LKML sin :-) > > > > Yes, it is about the same. On 2.6.25.4 (and earlier), the icons appear > > within a second or two, but with 2.6.26-rc2 or later, it takes about 20 > > seconds. I've now built and installed -rc5 and am seeing the same > > behaviour. > > > > I've also built -rc5 on my laptop. On that my kernel uses the older IDE > > drivers rather than libata. The boot proceeds with no pause, but I do see > > the same delay in the desktop icons appearing when I attach a usb-storage > > device. > > > > > > Let me know of any way I can help solve this. > > > > > > > > Please cc me to any reply as I'm not subscribed. > > > > > > cc's added. > > > > > > Rafael, we might need to track this as a post-2.6.26 regression. > > It already is ... as I asked in the actual bug (but no-one seems to have > noticed, so I assume the bug entry isn't set up correctly). Does this > still persist with 2.6.26-rc5? The reason for asking is that it looks > very much like a silent manifestation of our scsi_bus_uevent() problem > that got fixed in 2.6.26-rc5. > Yes, I still get the boot pause and the delay in desktop icons appearing when a usb-storage device is plugged in with -rc5. A boot log is attached. Is there some sort of verbose scsi boot messaging that I can switch on? I've looked but I'm damned if I can find anything in 'make menuconfig'. Chris > James -- Beauty is in the eye of the beerholder.
Jun 6 17:25:18 upstairs kernel: klogd 1.3-3, log source = /proc/kmsg started. Jun 6 17:25:18 upstairs kernel: Inspecting /boot/System.map-2.6.26-rc5 Jun 6 17:25:19 upstairs kernel: Loaded 26357 symbols from /boot/System.map-2.6.26-rc5. Jun 6 17:25:19 upstairs kernel: Symbols match kernel version 2.6.26. Jun 6 17:25:19 upstairs kernel: No module symbols loaded - kernel modules not enabled. Jun 6 17:25:19 upstairs kernel: 1cf8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:05: dma bitmask 0xe flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:05: io min 0x370 max 0x370 align 1 size 6 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:05: io min 0x377 max 0x377 align 1 size 1 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:05: end dependent options Jun 6 17:25:19 upstairs kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) Jun 6 17:25:19 upstairs kernel: pnp 00:06: parse allocated resources Jun 6 17:25:19 upstairs kernel: pnp 00:06: add io 0x378-0x37f flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: add io 0x778-0x77b flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: add irq 7 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: add dma 3 flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:06: parse resource options Jun 6 17:25:19 upstairs kernel: pnp 00:06: new independent option Jun 6 17:25:19 upstairs kernel: pnp 00:06: new dependent option (priority 0x0) Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x378 max 0x378 align 1 size 8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x778 max 0x778 align 1 size 4 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000080 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: dma bitmask 0x8 flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:06: new dependent option (priority 0x1) Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x378 max 0x378 align 1 size 8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x778 max 0x778 align 1 size 4 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: dma bitmask 0xb flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:06: new dependent option (priority 0x1) Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x278 max 0x278 align 1 size 8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x678 max 0x678 align 1 size 4 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: dma bitmask 0xb flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:06: new dependent option (priority 0x1) Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: io min 0x7bc max 0x7bc align 1 size 4 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:06: dma bitmask 0xb flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:06: end dependent options Jun 6 17:25:19 upstairs kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active) Jun 6 17:25:19 upstairs kernel: pnp 00:07: parse allocated resources Jun 6 17:25:19 upstairs kernel: pnp 00:07: add io 0x0-0xffffffff flags 0x10000001 Jun 6 17:25:19 upstairs kernel: pnp 00:07: add io 0x0-0xffffffff flags 0x10000001 Jun 6 17:25:19 upstairs kernel: pnp 00:07: add io 0x290-0x297 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x1c1 Jun 6 17:25:19 upstairs kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) Jun 6 17:25:19 upstairs kernel: pnp 00:08: parse allocated resources Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x10-0x1f flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x22-0x3f flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x44-0x5f flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x62-0x63 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x65-0x6f flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x72-0x7f flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x80-0x80 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x84-0x86 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x88-0x88 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x8c-0x8e flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x90-0x9f flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0xa2-0xbf flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0xe0-0xef flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x4d0-0x4d1 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x800-0x87f flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x400-0x41f flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add io 0x480-0x4bf flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add mem 0xfed20000-0xfed8ffff flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: add mem 0xffb00000-0xffbfffff flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x1c1 Jun 6 17:25:19 upstairs kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) Jun 6 17:25:19 upstairs kernel: pnp 00:09: parse allocated resources Jun 6 17:25:19 upstairs kernel: pnp 00:09: add mem 0xfec00000-0xfec00fff flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:09: add mem 0xfee00000-0xfee00fff flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:09: PNP0c02: calling quirk_system_pci_resources+0x0/0x1c1 Jun 6 17:25:19 upstairs kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) Jun 6 17:25:19 upstairs kernel: pnp 00:0a: parse allocated resources Jun 6 17:25:19 upstairs kernel: pnp 00:0a: add io 0x60-0x60 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0a: add io 0x64-0x64 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0a: add irq 1 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) Jun 6 17:25:19 upstairs kernel: pnp 00:0b: parse allocated resources Jun 6 17:25:19 upstairs kernel: pnp 00:0b: add io 0x3f8-0x3ff flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: add irq 4 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: parse resource options Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new independent option Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new dependent option (priority 0x0) Jun 6 17:25:19 upstairs kernel: pnp 00:0b: io min 0x3f8 max 0x3f8 align 4 size 8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1) Jun 6 17:25:19 upstairs kernel: pnp 00:0b: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1) Jun 6 17:25:19 upstairs kernel: pnp 00:0b: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1) Jun 6 17:25:19 upstairs kernel: pnp 00:0b: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1) Jun 6 17:25:19 upstairs kernel: pnp 00:0b: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0b: end dependent options Jun 6 17:25:19 upstairs kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) Jun 6 17:25:19 upstairs kernel: pnp 00:0c: parse allocated resources Jun 6 17:25:19 upstairs kernel: pnp 00:0c: add mem 0x0-0x9ffff flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0c: add mem 0xc0000-0xdffff flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:0c: add mem 0xe0000-0xfffff flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:0c: add mem 0x100000-0x7ffeffff flags 0x1 Jun 6 17:25:19 upstairs kernel: pnp 00:0c: add mem 0xfff00000-0xffffffff flags 0x0 Jun 6 17:25:19 upstairs kernel: pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x1c1 Jun 6 17:25:19 upstairs kernel: pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) Jun 6 17:25:19 upstairs kernel: pnp: PnP ACPI: found 13 devices Jun 6 17:25:19 upstairs kernel: ACPI: ACPI bus type pnp unregistered Jun 6 17:25:19 upstairs kernel: SCSI subsystem initialized Jun 6 17:25:19 upstairs kernel: libata version 3.00 loaded. Jun 6 17:25:19 upstairs kernel: usbcore: registered new interface driver usbfs Jun 6 17:25:19 upstairs kernel: usbcore: registered new interface driver hub Jun 6 17:25:19 upstairs kernel: usbcore: registered new device driver usb Jun 6 17:25:19 upstairs kernel: PCI: Using ACPI for IRQ routing Jun 6 17:25:19 upstairs kernel: pnp: the driver 'system' has been registered Jun 6 17:25:19 upstairs kernel: system 00:07: ioport range 0x290-0x297 has been reserved Jun 6 17:25:19 upstairs kernel: system 00:07: iomem range 0x0-0x0 could not be reserved Jun 6 17:25:19 upstairs last message repeated 23 times Jun 6 17:25:19 upstairs kernel: system 00:07: driver attached Jun 6 17:25:19 upstairs kernel: system 00:08: ioport range 0x4d0-0x4d1 has been reserved Jun 6 17:25:19 upstairs kernel: system 00:08: ioport range 0x800-0x87f has been reserved Jun 6 17:25:19 upstairs kernel: system 00:08: ioport range 0x400-0x41f has been reserved Jun 6 17:25:19 upstairs kernel: system 00:08: ioport range 0x480-0x4bf has been reserved Jun 6 17:25:19 upstairs kernel: system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved Jun 6 17:25:19 upstairs kernel: system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved Jun 6 17:25:19 upstairs kernel: system 00:08: iomem range 0x0-0x0 could not be reserved Jun 6 17:25:19 upstairs last message repeated 21 times Jun 6 17:25:19 upstairs kernel: system 00:08: driver attached Jun 6 17:25:19 upstairs kernel: system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved Jun 6 17:25:19 upstairs kernel: system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved Jun 6 17:25:19 upstairs kernel: system 00:09: iomem range 0x0-0x0 could not be reserved Jun 6 17:25:19 upstairs last message repeated 21 times Jun 6 17:25:19 upstairs kernel: system 00:09: driver attached Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0x0-0x9ffff could not be reserved Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0xc0000-0xdffff could not be reserved Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0xe0000-0xfffff could not be reserved Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved Jun 6 17:25:19 upstairs kernel: system 00:0c: iomem range 0x0-0x0 could not be reserved Jun 6 17:25:19 upstairs last message repeated 18 times Jun 6 17:25:19 upstairs kernel: system 00:0c: driver attached Jun 6 17:25:19 upstairs kernel: PCI: Bridge: 0000:00:01.0 Jun 6 17:25:19 upstairs kernel: IO window: c000-cfff Jun 6 17:25:19 upstairs kernel: MEM window: 0xfa000000-0xfbefffff Jun 6 17:25:19 upstairs kernel: PREFETCH window: 0x00000000f0000000-0x00000000f8ffffff Jun 6 17:25:19 upstairs kernel: PCI: Bridge: 0000:00:1e.0 Jun 6 17:25:19 upstairs kernel: IO window: d000-efff Jun 6 17:25:19 upstairs kernel: MEM window: 0xfbf00000-0xfbffffff Jun 6 17:25:19 upstairs kernel: PREFETCH window: disabled. Jun 6 17:25:19 upstairs kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Jun 6 17:25:19 upstairs kernel: NET: Registered protocol family 2 Jun 6 17:25:19 upstairs kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jun 6 17:25:19 upstairs kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jun 6 17:25:19 upstairs kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Jun 6 17:25:19 upstairs kernel: TCP: Hash tables configured (established 131072 bind 65536) Jun 6 17:25:19 upstairs kernel: TCP reno registered Jun 6 17:25:19 upstairs kernel: NET: Registered protocol family 1 Jun 6 17:25:19 upstairs kernel: highmem bounce pool size: 64 pages Jun 6 17:25:19 upstairs kernel: msgmni has been set to 1750 for ipc namespace c03dea00 Jun 6 17:25:19 upstairs kernel: io scheduler noop registered Jun 6 17:25:19 upstairs kernel: io scheduler cfq registered (default) Jun 6 17:25:19 upstairs kernel: pci 0000:01:00.0: Boot video device Jun 6 17:25:19 upstairs kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 Jun 6 17:25:19 upstairs kernel: ACPI: Power Button (FF) [PWRF] Jun 6 17:25:19 upstairs kernel: input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Jun 6 17:25:19 upstairs kernel: ACPI: Power Button (CM) [PWRB] Jun 6 17:25:19 upstairs kernel: ACPI: ACPI0007:00 is registered as cooling_device0 Jun 6 17:25:19 upstairs kernel: ACPI: Processor [CPU1] (supports 8 throttling states) Jun 6 17:25:19 upstairs kernel: ACPI: ACPI0007:01 is registered as cooling_device1 Jun 6 17:25:19 upstairs kernel: Real Time Clock Driver v1.12ac Jun 6 17:25:19 upstairs kernel: Linux agpgart interface v0.103 Jun 6 17:25:19 upstairs kernel: agpgart: Detected an Intel 865 Chipset. Jun 6 17:25:19 upstairs kernel: agpgart: AGP aperture is 64M @ 0xec000000 Jun 6 17:25:19 upstairs kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Jun 6 17:25:19 upstairs kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jun 6 17:25:19 upstairs kernel: pnp: the driver 'serial' has been registered Jun 6 17:25:19 upstairs kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jun 6 17:25:19 upstairs kernel: serial 00:0b: driver attached Jun 6 17:25:19 upstairs kernel: 8139too Fast Ethernet driver 0.9.28 Jun 6 17:25:19 upstairs kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 23 (level, low) -> IRQ 23 Jun 6 17:25:19 upstairs kernel: eth0: RealTek RTL8139 at 0xf8816c00, 00:17:31:a9:1d:48, IRQ 23 Jun 6 17:25:19 upstairs kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D' Jun 6 17:25:19 upstairs kernel: Driver 'sd' needs updating - please use bus_type methods Jun 6 17:25:19 upstairs kernel: Driver 'sr' needs updating - please use bus_type methods Jun 6 17:25:19 upstairs kernel: ata_piix 0000:00:1f.1: version 2.12 Jun 6 17:25:19 upstairs kernel: ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) Jun 6 17:25:19 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 Jun 6 17:25:19 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64 Jun 6 17:25:19 upstairs kernel: scsi0 : ata_piix Jun 6 17:25:19 upstairs kernel: scsi1 : ata_piix Jun 6 17:25:19 upstairs kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 Jun 6 17:25:19 upstairs kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 Jun 6 17:25:19 upstairs kernel: ata1.00: ATA-7: MAXTOR STM3250820A, 3.AAE, max UDMA/100 Jun 6 17:25:19 upstairs kernel: ata1.00: 488397168 sectors, multi 16: LBA48 Jun 6 17:25:19 upstairs kernel: ata1.01: ATA-7: Maxtor 6L160P0, BAJ41G20, max UDMA/133 Jun 6 17:25:19 upstairs kernel: ata1.01: 320173056 sectors, multi 16: LBA48 Jun 6 17:25:19 upstairs kernel: ata1.00: configured for UDMA/100 Jun 6 17:25:19 upstairs kernel: ata1.01: configured for UDMA/100 Jun 6 17:25:19 upstairs kernel: Switched to NOHz mode on CPU #1 Jun 6 17:25:19 upstairs kernel: Switched to NOHz mode on CPU #0 Jun 6 17:25:19 upstairs kernel: ata2.00: ATAPI: SONY DVD RW DW-G120A, MYS2, max UDMA/66 Jun 6 17:25:19 upstairs kernel: ata2.01: ATAPI: PHILIPS DVDR1628P1, Q2.2, max UDMA/33 Jun 6 17:25:19 upstairs kernel: ata2.00: configured for UDMA/66 Jun 6 17:25:19 upstairs kernel: ata2.01: configured for UDMA/33 Jun 6 17:25:19 upstairs kernel: scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5 Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Write Protect is off Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Write Protect is off Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 6 17:25:19 upstairs kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > Jun 6 17:25:19 upstairs kernel: sd 0:0:0:0: [sda] Attached SCSI disk Jun 6 17:25:19 upstairs kernel: scsi 0:0:1:0: Direct-Access ATA Maxtor 6L160P0 BAJ4 PQ: 0 ANSI: 5 Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB) Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Write Protect is off Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB) Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Write Protect is off Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 6 17:25:19 upstairs kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 > Jun 6 17:25:19 upstairs kernel: sdb2: <bsd: sdb9 sdb10 sdb11 sdb12 sdb13 > Jun 6 17:25:19 upstairs kernel: sd 0:0:1:0: [sdb] Attached SCSI disk Jun 6 17:25:19 upstairs kernel: scsi 1:0:0:0: CD-ROM SONY DVD RW DW-G120A MYS2 PQ: 0 ANSI: 5 Jun 6 17:25:19 upstairs kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Jun 6 17:25:19 upstairs kernel: Uniform CD-ROM driver Revision: 3.20 Jun 6 17:25:19 upstairs kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0 Jun 6 17:25:19 upstairs kernel: scsi 1:0:1:0: CD-ROM PHILIPS DVDR1628P1 Q2.2 PQ: 0 ANSI: 5 Jun 6 17:25:19 upstairs kernel: sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Jun 6 17:25:19 upstairs kernel: sr 1:0:1:0: Attached scsi CD-ROM sr1 Jun 6 17:25:19 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 Jun 6 17:25:19 upstairs kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] Jun 6 17:25:19 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Jun 6 17:25:19 upstairs kernel: scsi2 : ata_piix Jun 6 17:25:19 upstairs kernel: scsi3 : ata_piix Jun 6 17:25:19 upstairs kernel: ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 18 Jun 6 17:25:19 upstairs kernel: ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 18 Jun 6 17:25:19 upstairs kernel: ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OA70A, max UDMA/133 Jun 6 17:25:19 upstairs kernel: ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) Jun 6 17:25:19 upstairs kernel: ata3.00: configured for UDMA/133 Jun 6 17:25:19 upstairs kernel: scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] 321672960 512-byte hardware sectors (164697 MB) Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Write Protect is off Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] 321672960 512-byte hardware sectors (164697 MB) Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Write Protect is off Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jun 6 17:25:19 upstairs kernel: sdc: sdc1 sdc2 Jun 6 17:25:19 upstairs kernel: sd 2:0:0:0: [sdc] Attached SCSI disk Jun 6 17:25:19 upstairs kernel: pnp: the driver 'i8042 kbd' has been registered Jun 6 17:25:19 upstairs kernel: i8042 kbd 00:0a: driver attached Jun 6 17:25:19 upstairs kernel: pnp: the driver 'i8042 aux' has been registered Jun 6 17:25:19 upstairs kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 Jun 6 17:25:19 upstairs kernel: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Jun 6 17:25:19 upstairs kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jun 6 17:25:19 upstairs kernel: mice: PS/2 mouse device common for all mice Jun 6 17:25:19 upstairs kernel: Advanced Linux Sound Architecture Driver Version 1.0.16. Jun 6 17:25:19 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 Jun 6 17:25:19 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64 Jun 6 17:25:19 upstairs kernel: intel8x0_measure_ac97_clock: measured 50838 usecs Jun 6 17:25:19 upstairs kernel: intel8x0: clocking to 48000 Jun 6 17:25:19 upstairs kernel: ALSA device list: Jun 6 17:25:19 upstairs kernel: #0: Intel ICH5 with ALC655 at irq 17 Jun 6 17:25:19 upstairs kernel: TCP cubic registered Jun 6 17:25:19 upstairs kernel: NET: Registered protocol family 15 Jun 6 17:25:19 upstairs kernel: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Jun 6 17:25:19 upstairs kernel: Starting balanced_irq Jun 6 17:25:19 upstairs kernel: Using IPI No-Shortcut mode Jun 6 17:25:19 upstairs kernel: kjournald starting. Commit interval 5 seconds Jun 6 17:25:19 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 6 17:25:19 upstairs kernel: VFS: Mounted root (ext3 filesystem) readonly. Jun 6 17:25:19 upstairs kernel: Freeing unused kernel memory: 200k freed Jun 6 17:25:19 upstairs kernel: EXT3 FS on sdc1, internal journal Jun 6 17:25:19 upstairs kernel: USB Universal Host Controller Interface driver v3.0 Jun 6 17:25:19 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 Jun 6 17:25:19 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Jun 6 17:25:19 upstairs kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller Jun 6 17:25:19 upstairs kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Jun 6 17:25:19 upstairs kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000a800 Jun 6 17:25:19 upstairs kernel: usb usb1: configuration #1 chosen from 1 choice Jun 6 17:25:19 upstairs kernel: hub 1-0:1.0: USB hub found Jun 6 17:25:19 upstairs kernel: hub 1-0:1.0: 2 ports detected Jun 6 17:25:44 upstairs kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver Jun 6 17:25:44 upstairs kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 Jun 6 17:25:44 upstairs kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb1: Product: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb1: Manufacturer: Linux 2.6.26-rc5 uhci_hcd Jun 6 17:25:44 upstairs kernel: usb usb1: SerialNumber: 0000:00:1d.0 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 Jun 6 17:25:44 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000 Jun 6 17:25:44 upstairs kernel: usb usb2: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 2-0:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 2-0:1.0: 2 ports detected Jun 6 17:25:44 upstairs kernel: pnp: the driver 'parport_pc' has been registered Jun 6 17:25:44 upstairs kernel: parport_pc 00:06: reported by Plug and Play ACPI Jun 6 17:25:44 upstairs kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] Jun 6 17:25:44 upstairs kernel: parport_pc 00:06: driver attached Jun 6 17:25:44 upstairs kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jun 6 17:25:44 upstairs kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb2: Product: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb2: Manufacturer: Linux 2.6.26-rc5 uhci_hcd Jun 6 17:25:44 upstairs kernel: usb usb2: SerialNumber: 0000:00:1d.1 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 Jun 6 17:25:44 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400 Jun 6 17:25:44 upstairs kernel: usb usb3: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 3-0:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 3-0:1.0: 2 ports detected Jun 6 17:25:44 upstairs kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jun 6 17:25:44 upstairs kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb3: Product: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb3: Manufacturer: Linux 2.6.26-rc5 uhci_hcd Jun 6 17:25:44 upstairs kernel: usb usb3: SerialNumber: 0000:00:1d.2 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 Jun 6 17:25:44 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64 Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800 Jun 6 17:25:44 upstairs kernel: usb usb4: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 4-0:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 4-0:1.0: 2 ports detected Jun 6 17:25:44 upstairs kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2 Jun 6 17:25:44 upstairs kernel: usb 1-2: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: usb 1-2: New USB device found, idVendor=06bd, idProduct=2061 Jun 6 17:25:44 upstairs kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 6 17:25:44 upstairs kernel: usb 1-2: Product: SNAPSCAN Jun 6 17:25:44 upstairs kernel: usb 1-2: Manufacturer: AGFA Jun 6 17:25:44 upstairs kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jun 6 17:25:44 upstairs kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb4: Product: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb4: Manufacturer: Linux 2.6.26-rc5 uhci_hcd Jun 6 17:25:44 upstairs kernel: usb usb4: SerialNumber: 0000:00:1d.3 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 Jun 6 17:25:44 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:00:1d.7: debug port 1 Jun 6 17:25:44 upstairs kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7 Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fffc00 Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Jun 6 17:25:44 upstairs kernel: usb usb5: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 5-0:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 5-0:1.0: 8 ports detected Jun 6 17:25:44 upstairs kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 Jun 6 17:25:44 upstairs kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb5: Product: EHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb5: Manufacturer: Linux 2.6.26-rc5 ehci_hcd Jun 6 17:25:44 upstairs kernel: usb usb5: SerialNumber: 0000:00:1d.7 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17 Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.0: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.0: new USB bus registered, assigned bus number 6 Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.0: irq 17, io base 0x0000e400 Jun 6 17:25:44 upstairs kernel: usb usb6: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 6-0:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 6-0:1.0: 2 ports detected Jun 6 17:25:44 upstairs kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 Jun 6 17:25:44 upstairs kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb6: Product: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb6: Manufacturer: Linux 2.6.26-rc5 uhci_hcd Jun 6 17:25:44 upstairs kernel: usb usb6: SerialNumber: 0000:02:09.0 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 18 (level, low) -> IRQ 18 Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.1: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 7 Jun 6 17:25:44 upstairs kernel: uhci_hcd 0000:02:09.1: irq 18, io base 0x0000e800 Jun 6 17:25:44 upstairs kernel: usb usb7: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 7-0:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 7-0:1.0: 2 ports detected Jun 6 17:25:44 upstairs kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 Jun 6 17:25:44 upstairs kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb7: Product: UHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb7: Manufacturer: Linux 2.6.26-rc5 uhci_hcd Jun 6 17:25:44 upstairs kernel: usb usb7: SerialNumber: 0000:02:09.1 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.2[C] -> GSI 19 (level, low) -> IRQ 19 Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:09.2: EHCI Host Controller Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 8 Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:09.2: irq 19, io mem 0xfbfffc00 Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Jun 6 17:25:44 upstairs kernel: usb usb8: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 8-0:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 8-0:1.0: 4 ports detected Jun 6 17:25:44 upstairs kernel: usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 Jun 6 17:25:44 upstairs kernel: usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb8: Product: EHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb8: Manufacturer: Linux 2.6.26-rc5 ehci_hcd Jun 6 17:25:44 upstairs kernel: usb usb8: SerialNumber: 0000:02:09.2 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 21 Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.0: OHCI Host Controller Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.0: new USB bus registered, assigned bus number 9 Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.0: irq 21, io mem 0xfbffd000 Jun 6 17:25:44 upstairs kernel: usb 1-2: USB disconnect, address 2 Jun 6 17:25:44 upstairs kernel: usb usb9: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 9-0:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 9-0:1.0: 3 ports detected Jun 6 17:25:44 upstairs kernel: usb 1-2: new full speed USB device using uhci_hcd and address 3 Jun 6 17:25:44 upstairs kernel: usb 1-2: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: usb 1-2: New USB device found, idVendor=06bd, idProduct=2061 Jun 6 17:25:44 upstairs kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 6 17:25:44 upstairs kernel: usb 1-2: Product: SNAPSCAN Jun 6 17:25:44 upstairs kernel: usb 1-2: Manufacturer: AGFA Jun 6 17:25:44 upstairs kernel: usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 Jun 6 17:25:44 upstairs kernel: usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb9: Product: OHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb9: Manufacturer: Linux 2.6.26-rc5 ohci_hcd Jun 6 17:25:44 upstairs kernel: usb usb9: SerialNumber: 0000:02:0a.0 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.1[B] -> GSI 22 (level, low) -> IRQ 22 Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.1: OHCI Host Controller Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.1: new USB bus registered, assigned bus number 10 Jun 6 17:25:44 upstairs kernel: ohci_hcd 0000:02:0a.1: irq 22, io mem 0xfbffe000 Jun 6 17:25:44 upstairs kernel: usb 8-1: new high speed USB device using ehci_hcd and address 2 Jun 6 17:25:44 upstairs kernel: usb 8-1: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: usb 8-1: New USB device found, idVendor=2040, idProduct=9950 Jun 6 17:25:44 upstairs kernel: usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 6 17:25:44 upstairs kernel: usb 8-1: Product: WinTV Nova-DT Jun 6 17:25:44 upstairs kernel: usb 8-1: Manufacturer: Hauppauge Jun 6 17:25:44 upstairs kernel: usb 8-1: SerialNumber: 4030248054 Jun 6 17:25:44 upstairs kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2 Jun 6 17:25:44 upstairs kernel: usb 2-1: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: usb 2-1: New USB device found, idVendor=04b8, idProduct=0005 Jun 6 17:25:44 upstairs kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 6 17:25:44 upstairs kernel: usb 2-1: Product: USB Printer Jun 6 17:25:44 upstairs kernel: usb 2-1: Manufacturer: EPSON Jun 6 17:25:44 upstairs kernel: usb 2-1: SerialNumber: L80020307150840450 Jun 6 17:25:44 upstairs kernel: usb usb10: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 10-0:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 10-0:1.0: 2 ports detected Jun 6 17:25:44 upstairs kernel: usb 2-2: new low speed USB device using uhci_hcd and address 3 Jun 6 17:25:44 upstairs kernel: usb 2-2: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: usb 2-2: New USB device found, idVendor=045e, idProduct=00f1 Jun 6 17:25:44 upstairs kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 6 17:25:44 upstairs kernel: usb 2-2: Product: Microsoft Wireless Desktop Receiver 3.1A Jun 6 17:25:44 upstairs kernel: usb 2-2: Manufacturer: Microsft Jun 6 17:25:44 upstairs kernel: usb 9-2: new full speed USB device using ohci_hcd and address 2 Jun 6 17:25:44 upstairs kernel: usb 9-2: not running at top speed; connect to a high speed hub Jun 6 17:25:44 upstairs kernel: usb 9-2: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 9-2:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 9-2:1.0: 4 ports detected Jun 6 17:25:44 upstairs kernel: usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 Jun 6 17:25:44 upstairs kernel: usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb10: Product: OHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb10: Manufacturer: Linux 2.6.26-rc5 ohci_hcd Jun 6 17:25:44 upstairs kernel: usb usb10: SerialNumber: 0000:02:0a.1 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.2[C] -> GSI 23 (level, low) -> IRQ 23 Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:0a.2: EHCI Host Controller Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:0a.2: new USB bus registered, assigned bus number 11 Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:0a.2: irq 23, io mem 0xfbfff800 Jun 6 17:25:44 upstairs kernel: ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 Jun 6 17:25:44 upstairs kernel: usb usb11: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 11-0:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 11-0:1.0: 5 ports detected Jun 6 17:25:44 upstairs kernel: usb 9-2: New USB device found, idVendor=0409, idProduct=0059 Jun 6 17:25:44 upstairs kernel: usb 9-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 6 17:25:44 upstairs kernel: usb 9-2: USB disconnect, address 2 Jun 6 17:25:44 upstairs kernel: usb usb11: New USB device found, idVendor=1d6b, idProduct=0002 Jun 6 17:25:44 upstairs kernel: usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb11: Product: EHCI Host Controller Jun 6 17:25:44 upstairs kernel: usb usb11: Manufacturer: Linux 2.6.26-rc5 ehci_hcd Jun 6 17:25:44 upstairs kernel: usb usb11: SerialNumber: 0000:02:0a.2 Jun 6 17:25:44 upstairs kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 22 Jun 6 17:25:44 upstairs kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] Jun 6 17:25:44 upstairs kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 Jun 6 17:25:44 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2 Jun 6 17:25:44 upstairs kernel: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2 Jun 6 17:25:44 upstairs kernel: usb 11-3: new high speed USB device using ehci_hcd and address 2 Jun 6 17:25:44 upstairs kernel: dib0700: loaded with support for 7 different device-types Jun 6 17:25:44 upstairs kernel: dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. Jun 6 17:25:44 upstairs kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jun 6 17:25:44 upstairs kernel: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) Jun 6 17:25:44 upstairs kernel: usb 11-3: configuration #1 chosen from 1 choice Jun 6 17:25:44 upstairs kernel: hub 11-3:1.0: USB hub found Jun 6 17:25:44 upstairs kernel: hub 11-3:1.0: 4 ports detected Jun 6 17:25:44 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input3 Jun 6 17:25:44 upstairs kernel: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2 Jun 6 17:25:44 upstairs kernel: DVB: registering frontend 0 (DiBcom 3000MC/P)... Jun 6 17:25:44 upstairs kernel: usb 11-3: New USB device found, idVendor=0409, idProduct=0059 Jun 6 17:25:44 upstairs kernel: usb 11-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jun 6 17:25:44 upstairs kernel: usbcore: registered new interface driver usblp Jun 6 17:25:44 upstairs kernel: usbcore: registered new interface driver usbhid Jun 6 17:25:44 upstairs kernel: usbhid: v2.6:USB HID core driver Jun 6 17:25:44 upstairs kernel: MT2060: successfully identified (IF1 = 1230) Jun 6 17:25:44 upstairs kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jun 6 17:25:44 upstairs kernel: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) Jun 6 17:25:44 upstairs kernel: DVB: registering frontend 1 (DiBcom 3000MC/P)... Jun 6 17:25:44 upstairs kernel: MT2060: successfully identified (IF1 = 1234) Jun 6 17:25:44 upstairs kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666000013cc] Jun 6 17:25:44 upstairs kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:09.2/usb8/8-1/input/input4 Jun 6 17:25:44 upstairs kernel: dvb-usb: schedule remote query interval to 150 msecs. Jun 6 17:25:44 upstairs kernel: dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. Jun 6 17:25:44 upstairs kernel: usbcore: registered new interface driver dvb_usb_dib0700 Jun 6 17:25:44 upstairs kernel: fuse init (API version 7.9) Jun 6 17:25:44 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended Jun 6 17:25:44 upstairs kernel: kjournald starting. Commit interval 5 seconds Jun 6 17:25:44 upstairs kernel: EXT3 FS on sdb6, internal journal Jun 6 17:25:44 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 6 17:25:44 upstairs kernel: kjournald starting. Commit interval 5 seconds Jun 6 17:25:44 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended Jun 6 17:25:44 upstairs kernel: EXT3 FS on sda6, internal journal Jun 6 17:25:44 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 6 17:25:44 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended Jun 6 17:25:44 upstairs kernel: kjournald starting. Commit interval 5 seconds Jun 6 17:25:44 upstairs kernel: EXT3 FS on sda7, internal journal Jun 6 17:25:44 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 6 17:25:44 upstairs kernel: kjournald starting. Commit interval 5 seconds Jun 6 17:25:44 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended Jun 6 17:25:44 upstairs kernel: EXT3 FS on sdc2, internal journal Jun 6 17:25:44 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 6 17:25:44 upstairs kernel: Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k Jun 6 17:25:44 upstairs kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Jun 6 17:25:44 upstairs kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Jun 6 17:25:44 upstairs kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Jun 6 17:25:44 upstairs kernel: parport_pc 00:06: disabled Jun 6 17:25:44 upstairs kernel: pnp: the driver 'parport_pc' has been unregistered Jun 6 17:25:44 upstairs kernel: ieee1394: Node removed: ID:BUS[0-00:1023] GUID[00110666000013cc] Jun 6 17:26:31 upstairs kernel: usb 11-2: new high speed USB device using ehci_hcd and address 3 Jun 6 17:26:31 upstairs kernel: usb 11-2: configuration #1 chosen from 1 choice Jun 6 17:26:31 upstairs kernel: usb 11-2: New USB device found, idVendor=0930, idProduct=6545 Jun 6 17:26:31 upstairs kernel: usb 11-2: New USB device strings: Mfr=0, Product=2, SerialNumber=3 Jun 6 17:26:31 upstairs kernel: usb 11-2: Product: USB Flash Memory Jun 6 17:26:31 upstairs kernel: usb 11-2: SerialNumber: 0EC065712361A91E Jun 6 17:26:31 upstairs kernel: Initializing USB Mass Storage driver... Jun 6 17:26:31 upstairs kernel: scsi4 : SCSI emulation for USB Mass Storage devices Jun 6 17:26:31 upstairs kernel: usbcore: registered new interface driver usb-storage Jun 6 17:26:31 upstairs kernel: USB Mass Storage support registered. Jun 6 17:26:31 upstairs kernel: usb-storage: device found at 3 Jun 6 17:26:31 upstairs kernel: usb-storage: waiting for device to settle before scanning Jun 6 17:26:36 upstairs kernel: scsi 4:0:0:0: Direct-Access USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS Jun 6 17:26:37 upstairs kernel: sd 4:0:0:0: [sdd] 2013184 512-byte hardware sectors (1031 MB) Jun 6 17:26:37 upstairs kernel: sd 4:0:0:0: [sdd] Write Protect is off Jun 6 17:26:37 upstairs kernel: sd 4:0:0:0: [sdd] Mode Sense: 23 00 00 00 Jun 6 17:26:37 upstairs kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through Jun 6 17:26:38 upstairs kernel: sd 4:0:0:0: [sdd] 2013184 512-byte hardware sectors (1031 MB) Jun 6 17:26:38 upstairs kernel: sd 4:0:0:0: [sdd] Write Protect is off Jun 6 17:26:38 upstairs kernel: sd 4:0:0:0: [sdd] Mode Sense: 23 00 00 00 Jun 6 17:26:38 upstairs kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through Jun 6 17:26:38 upstairs kernel: sdd: sdd1 Jun 6 17:26:38 upstairs kernel: sd 4:0:0:0: [sdd] Attached SCSI removable disk Jun 6 17:26:38 upstairs kernel: usb-storage: device scan complete
