Hannes, Our FW team give me the feedback said: LSI never release CERC firware version >=6.62. I have asked our DELL contactor to check with DELL if DELL know who made this release. I will update you as soon as I get the words from DELL. Also if you have the information regarding to the CERC FW 6.62 release, can you pass them to me? I need to know the details about this release. Thanks. Bo Yang -----Original Message----- From: akpm@xxxxxxxxxxxxxxxxxxxx [mailto:akpm@xxxxxxxxxxxxxxxxxxxx] Sent: Friday, April 18, 2008 4:57 PM To: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx Cc: linux-scsi@xxxxxxxxxxxxxxx; akpm@xxxxxxxxxxxxxxxxxxxx; hare@xxxxxxx; Yang, Bo; James.Bottomley@xxxxxxxxxxxx; Patro, Sumant Subject: [patch 02/10] Dell CERC support for megaraid_mbox From: Hannes Reinecke <hare@xxxxxxx> Newer Dell CERC firmware (>= 6.62) implement a random deletion handling compatible with the legacy megaraid driver. The legacy handling shifted the target ID by 0x80 only for I/O commands (READ/WRITE/etc), whereas megaraid_mbox shifts the target ID always if random deletion is supported. The resulted in megaraid_mbox sending an INQUIRY to the wrong channel, and not finding any devices, obviously. So we disable the random deletion support if the offending firmware is found. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=6695 Signed-off-by: Hannes Reinecke <hare@xxxxxxx> Cc: "Patro, Sumant" <Sumant.Patro@xxxxxxx> Cc: James Bottomley <James.Bottomley@xxxxxxxxxxxx> Cc: "Yang, Bo" <Bo.Yang@xxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/scsi/megaraid/megaraid_mbox.c | 17 +++++++++++++++++ drivers/scsi/megaraid/megaraid_mbox.h | 1 + 2 files changed, 18 insertions(+) diff -puN drivers/scsi/megaraid/megaraid_mbox.c~dell-cerc-support-for-megaraid_mbo x drivers/scsi/megaraid/megaraid_mbox.c --- a/drivers/scsi/megaraid/megaraid_mbox.c~dell-cerc-support-for-megaraid_m box +++ a/drivers/scsi/megaraid/megaraid_mbox.c @@ -3168,6 +3168,23 @@ megaraid_mbox_support_random_del(adapter uint8_t raw_mbox[sizeof(mbox_t)]; int rval; + /* + * Newer firmware on Dell CERC expect a different + * random deletion handling, so disable it. + */ + if (adapter->pdev->vendor == PCI_VENDOR_ID_AMI && + adapter->pdev->device == PCI_DEVICE_ID_AMI_MEGARAID3 && + adapter->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL && + adapter->pdev->subsystem_device == PCI_SUBSYS_ID_CERC_ATA100_4CH && + (adapter->fw_version[0] > '6' || + (adapter->fw_version[0] == '6' && + adapter->fw_version[2] > '6') || + (adapter->fw_version[0] == '6' + && adapter->fw_version[2] == '6' + && adapter->fw_version[3] > '1'))) { + con_log(CL_DLEVEL1, ("megaraid: disable random deletion\n")); + return 0; + } mbox = (mbox_t *)raw_mbox; diff -puN drivers/scsi/megaraid/megaraid_mbox.h~dell-cerc-support-for-megaraid_mbo x drivers/scsi/megaraid/megaraid_mbox.h --- a/drivers/scsi/megaraid/megaraid_mbox.h~dell-cerc-support-for-megaraid_m box +++ a/drivers/scsi/megaraid/megaraid_mbox.h @@ -88,6 +88,7 @@ #define PCI_SUBSYS_ID_PERC3_QC 0x0471 #define PCI_SUBSYS_ID_PERC3_DC 0x0493 #define PCI_SUBSYS_ID_PERC3_SC 0x0475 +#define PCI_SUBSYS_ID_CERC_ATA100_4CH 0x0511 #define MBOX_MAX_SCSI_CMDS 128 // number of cmds reserved for kernel _ -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
