Re: [PATCH] mpt fusion: Power Management fixes for MPT SAS PCI-Econtrollers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Re-submitting the patch with your review comments added. 
Separated MSI releated changes in another different patch.

---
The system power state changes like hibernation and standby are not happening
properly with 106XE controllers, this patch modifies the driver to free
resources and allocate resources in power management entry points

Signed-off-by: Sathya Prakash <sathya.prakash@xxxxxxx>
---

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 7587413..e3495a6 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1430,6 +1430,98 @@ mpt_get_product_name(u16 vendor, u16 device, u8 revision, char *prod_name)
 		sprintf(prod_name, "%s", product_str);
 }
 
+/**
+ *	mpt_mapresources - map in memory mapped io
+ *	@ioc: Pointer to pointer to IOC adapter
+ *
+ **/
+static int
+mpt_mapresources(MPT_ADAPTER *ioc)
+{
+	u8		__iomem *mem;
+	int		 ii;
+	unsigned long	 mem_phys;
+	unsigned long	 port;
+	u32		 msize;
+	u32		 psize;
+	u8		 revision;
+	int		 r = -ENODEV;
+	struct pci_dev *pdev;
+
+	pdev = ioc->pcidev;
+	ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+	if (pci_enable_device_mem(pdev)) {
+		printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
+		    "failed\n", ioc->name);
+		return r;
+	}
+	if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
+		printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
+		    "MEM failed\n", ioc->name);
+		return r;
+	}
+
+	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
+
+	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)
+	    && !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
+		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+		    ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+		    ioc->name));
+	} else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)
+	    && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+		dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+		    ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+		    ioc->name));
+	} else {
+		printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+		    ioc->name, pci_name(pdev));
+		pci_release_selected_regions(pdev, ioc->bars);
+		return r;
+	}
+
+	mem_phys = msize = 0;
+	port = psize = 0;
+	for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
+		if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
+			if (psize)
+				continue;
+			/* Get I/O space! */
+			port = pci_resource_start(pdev, ii);
+			psize = pci_resource_len(pdev, ii);
+		} else {
+			if (msize)
+				continue;
+			/* Get memmap */
+			mem_phys = pci_resource_start(pdev, ii);
+			msize = pci_resource_len(pdev, ii);
+		}
+	}
+	ioc->mem_size = msize;
+
+	mem = NULL;
+	/* Get logical ptr for PciMem0 space */
+	/*mem = ioremap(mem_phys, msize);*/
+	mem = ioremap(mem_phys, msize);
+	if (mem == NULL) {
+		printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
+			" memory!\n", ioc->name);
+		return -EINVAL;
+	}
+	ioc->memmap = mem;
+	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %lx\n",
+	    ioc->name, mem, mem_phys));
+
+	ioc->mem_phys = mem_phys;
+	ioc->chip = (SYSIF_REGS __iomem *)mem;
+
+	/* Save Port IO values in case we need to do downloadboot */
+	ioc->pio_mem_phys = port;
+	ioc->pio_chip = (SYSIF_REGS __iomem *)port;
+
+	return 0;
+}
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	mpt_attach - Install a PCI intelligent MPT adapter.
@@ -1452,13 +1544,6 @@ int
 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	MPT_ADAPTER	*ioc;
-	u8		__iomem *mem;
-	u8		__iomem *pmem;
-	unsigned long	 mem_phys;
-	unsigned long	 port;
-	u32		 msize;
-	u32		 psize;
-	int		 ii;
 	u8		 cb_idx;
 	int		 r = -ENODEV;
 	u8		 revision;
@@ -1468,52 +1553,32 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct proc_dir_entry *dent, *ent;
 #endif
 
-	if (mpt_debug_level)
-		printk(KERN_INFO MYNAM ": mpt_debug_level=%xh\n", mpt_debug_level);
-
 	ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
 	if (ioc == NULL) {
 		printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
 		return -ENOMEM;
 	}
-	ioc->debug_level = mpt_debug_level;
+
 	ioc->id = mpt_ids++;
 	sprintf(ioc->name, "ioc%d", ioc->id);
 
-	ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
-	if (pci_enable_device_mem(pdev)) {
-		printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
-		       "failed\n", ioc->name);
-		kfree(ioc);
-		return r;
-	}
-	if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
-		printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
-		       "MEM failed\n", ioc->name);
-		kfree(ioc);
-		return r;
-	}
+	/*
+	 * set initial debug level
+	 * (refer to mptdebug.h)
+	 *
+	 */
+	ioc->debug_level = mpt_debug_level;
+	if (mpt_debug_level)
+		printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
 
 	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
 
-	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
-		dprintk(ioc, printk(MYIOC_s_INFO_FMT
-			": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", ioc->name));
-	} else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
-		printk(MYIOC_s_WARN_FMT ": 32 BIT PCI BUS DMA ADDRESSING NOT SUPPORTED\n",
-		    ioc->name);
+	ioc->pcidev = pdev;
+	if (mpt_mapresources(ioc)) {
 		kfree(ioc);
 		return r;
 	}
 
-	if (!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
-		dprintk(ioc, printk(MYIOC_s_INFO_FMT
-			": Using 64 bit consistent mask\n", ioc->name));
-	} else {
-		dprintk(ioc, printk(MYIOC_s_INFO_FMT
-			": Not using 64 bit consistent mask\n", ioc->name));
-	}
-
 	ioc->alloc_total = sizeof(MPT_ADAPTER);
 	ioc->req_sz = MPT_DEFAULT_FRAME_SIZE;		/* avoid div by zero! */
 	ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
@@ -1551,48 +1616,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* Find lookup slot. */
 	INIT_LIST_HEAD(&ioc->list);
 
-	mem_phys = msize = 0;
-	port = psize = 0;
-	for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
-		if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
-			if (psize)
-				continue;
-			/* Get I/O space! */
-			port = pci_resource_start(pdev, ii);
-			psize = pci_resource_len(pdev,ii);
-		} else {
-			if (msize)
-				continue;
-			/* Get memmap */
-			mem_phys = pci_resource_start(pdev, ii);
-			msize = pci_resource_len(pdev,ii);
-		}
-	}
-	ioc->mem_size = msize;
-
-	mem = NULL;
-	/* Get logical ptr for PciMem0 space */
-	/*mem = ioremap(mem_phys, msize);*/
-	mem = ioremap(mem_phys, msize);
-	if (mem == NULL) {
-		printk(MYIOC_s_ERR_FMT "Unable to map adapter memory!\n", ioc->name);
-		kfree(ioc);
-		return -EINVAL;
-	}
-	ioc->memmap = mem;
-	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %lx\n", ioc->name, mem, mem_phys));
-
 	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
 	    ioc->name, &ioc->facts, &ioc->pfacts[0]));
 
-	ioc->mem_phys = mem_phys;
-	ioc->chip = (SYSIF_REGS __iomem *)mem;
-
-	/* Save Port IO values in case we need to do downloadboot */
-	ioc->pio_mem_phys = port;
-	pmem = (u8 __iomem *)port;
-	ioc->pio_chip = (SYSIF_REGS __iomem *)pmem;
-
 	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
 	mpt_get_product_name(pdev->vendor, pdev->device, revision, ioc->prod_name);
 
@@ -1693,7 +1719,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		list_del(&ioc->list);
 		if (ioc->alt_ioc)
 			ioc->alt_ioc->alt_ioc = NULL;
-		iounmap(mem);
+		iounmap(ioc->memmap);
+		if (r != -5)
+			pci_release_selected_regions(pdev, ioc->bars);
 		kfree(ioc);
 		pci_set_drvdata(pdev, NULL);
 		return r;
@@ -1789,13 +1817,10 @@ mpt_suspend(struct pci_dev *pdev, pm_message_t state)
 	u32 device_state;
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 
-	device_state=pci_choose_state(pdev, state);
-
-	printk(MYIOC_s_INFO_FMT
-	"pci-suspend: pdev=0x%p, slot=%s, Entering operating state [D%d]\n",
-		ioc->name, pdev, pci_name(pdev), device_state);
-
-	pci_save_state(pdev);
+	device_state = pci_choose_state(pdev, state);
+	printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
+	    "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
+	    device_state);
 
 	/* put ioc into READY_STATE */
 	if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
@@ -1810,10 +1835,14 @@ mpt_suspend(struct pci_dev *pdev, pm_message_t state)
 	/* Clear any lingering interrupt */
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
 
+	free_irq(ioc->pci_irq, ioc);
+	if (ioc->msi_enable)
+		pci_disable_msi(ioc->pcidev);
+	ioc->pci_irq = -1;
+	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	pci_release_selected_regions(pdev, ioc->bars);
 	pci_set_power_state(pdev, device_state);
-
 	return 0;
 }
 
@@ -1828,48 +1857,54 @@ mpt_resume(struct pci_dev *pdev)
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 	u32 device_state = pdev->current_state;
 	int recovery_state;
+	int err;
 
-	printk(MYIOC_s_INFO_FMT
-	"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
-		ioc->name, pdev, pci_name(pdev), device_state);
+	printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
+	    "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
+	    device_state);
 
-	pci_set_power_state(pdev, 0);
+	pci_set_power_state(pdev, PCI_D0);
+	pci_enable_wake(pdev, PCI_D0, 0);
 	pci_restore_state(pdev);
-	if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) {
-		ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
-			IORESOURCE_IO);
-		if (pci_enable_device(pdev))
-			return 0;
-	} else {
-		ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
-		if (pci_enable_device_mem(pdev))
-			return 0;
-	}
-	if (pci_request_selected_regions(pdev, ioc->bars, "mpt"))
-		return 0;
+	ioc->pcidev = pdev;
+	err = mpt_mapresources(ioc);
+	if (err)
+		return err;
 
-	/* enable interrupts */
-	CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
-	ioc->active = 1;
+	printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
+	    ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
+	    CHIPREG_READ32(&ioc->chip->Doorbell));
 
-	printk(MYIOC_s_INFO_FMT
-		"pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
-		ioc->name,
-		(mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
-		CHIPREG_READ32(&ioc->chip->Doorbell));
+	/*
+	 * Errata workaround for SAS pci express:
+	 * Upon returning to the D0 state, the contents of the doorbell will be
+	 * stale data, and this will incorrectly signal to the host driver that
+	 * the firmware is ready to process mpt commands.   The workaround is
+	 * to issue a diagnostic reset.
+	 */
+	if (ioc->bus_type == SAS && (pdev->device ==
+	    MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
+	    MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
+		if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
+			printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
+			    ioc->name);
+			goto out;
+		}
+	}
 
 	/* bring ioc to operational state */
-	if ((recovery_state = mpt_do_ioc_recovery(ioc,
-	    MPT_HOSTEVENT_IOC_RECOVER, CAN_SLEEP)) != 0) {
-		printk(MYIOC_s_INFO_FMT
-			"pci-resume: Cannot recover, error:[%x]\n",
-			ioc->name, recovery_state);
-	} else {
+	printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
+	recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
+						 CAN_SLEEP);
+	if (recovery_state != 0)
+		printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
+		    "error:[%x]\n", ioc->name, recovery_state);
+	else
 		printk(MYIOC_s_INFO_FMT
-			"pci-resume: success\n", ioc->name);
-	}
-
+		    "pci-resume: success\n", ioc->name);
+ out:
 	return 0;
+
 }
 #endif
 
@@ -1908,6 +1943,7 @@ mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
  *		-3 if READY but PrimeIOCFifos Failed
  *		-4 if READY but IOCInit Failed
  *		-5 if failed to enable_device and/or request_selected_regions
+ *		-6 if failed to upload firmware
  */
 static int
 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
@@ -2104,7 +2140,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 				} else {
 					printk(MYIOC_s_WARN_FMT
 					    "firmware upload failure!\n", ioc->name);
-					ret = -5;
+					ret = -6;
 				}
 			}
 		}
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 0c252f6..c207bda 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1170,6 +1170,10 @@ mptscsih_shutdown(struct pci_dev *pdev)
 int
 mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
 {
+	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
+
+	scsi_block_requests(ioc->sh);
+	flush_scheduled_work();
 	mptscsih_shutdown(pdev);
 	return mpt_suspend(pdev,state);
 }
@@ -1183,7 +1187,12 @@ mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
 int
 mptscsih_resume(struct pci_dev *pdev)
 {
-	return mpt_resume(pdev);
+	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
+	int rc;
+
+	rc = mpt_resume(pdev);
+	scsi_unblock_requests(ioc->sh);
+	return rc;
 }
 
 #endif
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux