On Wed, 2008-03-05 at 06:58 -0500, Mark Hounschell wrote:
> Mike Christie wrote:
> > Mark Hounschell wrote:
> >> Mark Hounschell wrote:
> >>> Mike Christie wrote:
> >>>> Mike Christie wrote:
> >>>>> Mark Hounschell wrote:
> >>>>>> I seem to have run into some sort of regression in the SG_IO
> >>>>>> interface of 2.6.24.2. I have an application that up until 2.6.24
> >>>>>> worked fine. The 2.6.23.16 kernel works fine.
> >>>>>>
> >>>>>> During reads I get these kernel messages. Writes and other functions
> >>>>>> _seem_ OK. Actually basic
> >>>>>> reads are working. Its with large BC reads using an io_vec list that
> >>>>>> the problem shows up.
> >>>>>>
> >>>>> Are you doing SG_IO to the sg device (/dev/sg*) or to the block device
> >>>>> (/dev/sdX)?
> >>>> If you are doing SG_IO to the sg device, then I know of one regression
> >>>> (well not regression exactly, but I fixed a bug but the patch got
> >>>> partially overwritten by another patch and that caused a new bug). Both
> >>>> bugs are fixed in 2.6.25-rc2. Could you try that out if you are doing
> >>>> SG_IO to the sg device.
> >>>>
> >>> Yes, I'm using /dev/sg*. And yes again I'll checkout 2.6.25-rc2 ASIC.
> >>>
> >>> Thanks
> >>> Mark
> >>> -
> >>
> >> 2.6.25-rc2 does fix the problem I'm having. I don't suppose there is a
> >> patch
> >> lying around for 2.6.24.2??
> >>
> >
> > I attached a backport of the patch from Tony (added as cc) that is in
> > 2.6.25-rc2. Could you try it out against 2.6.24.2 just to make sure it
> > was this patch, then we can send it to stable.
> >
>
> >Mark Hounschell wrote:
> >
> >Sorry it took so long. This does fix my problem. I hope it's not to
> >late for 2.6.24.3
> >
>
> Backport
> 76d78300a6eb8b7f08e47703b7e68a659ffc2053
> to 2.6.24
Erm, I think you mean:
commit 4d2de3a50ce19af2008a90636436a1bf5b3b697b
Author: Tony Battersby <tonyb@xxxxxxxxxxxxxxx>
Date: Tue Feb 5 10:36:10 2008 -0500
[SCSI] fix BUG when sum(scatterlist) > bufflen
I can send it ... I thought the error was introduced post 2.6.24, but it
was actually in 2.6.24-rc1
James
> >From Tony Battersby:
>
> When sending a SCSI command to a tape drive via the SCSI Generic (sg)
> driver, if the command has a data transfer length more than
> scatter_elem_sz (32 KB default) and not a multiple of 512, then I either
> hit BUG_ON(!valid_dma_direction(direction)) in dma_unmap_sg() or else
> the command never completes (depending on the LLDD).
>
> When constructing scatterlists, the sg driver rounds up the scatterlist
> element sizes to be a multiple of 512. This can result in
> sum(scatterlist lengths) > bufflen. In this case, scsi_req_map_sg()
> incorrectly sets bio->bi_size to sum(scatterlist lengths) rather than to
> bufflen. When the command completes, req_bio_endio() detects that
> bio->bi_size != 0, and so it doesn't call bio_endio(). This causes the
> command to be resubmitted, resulting in BUG_ON or the command never
> completing.
>
> This patch makes scsi_req_map_sg() set bio->bi_size to bufflen rather
> than to sum(scatterlist lengths), which fixes the problem.
>
> Signed-off-by: Mike Christie <michaelc@xxxxxxxxxxx>
>
> --- linux-2.6.24.2/drivers/scsi/scsi_lib.c 2008-02-10 23:51:11.000000000
> -0600
> +++ linux-2.6.24.2.work/drivers/scsi/scsi_lib.c 2008-02-22
> 16:20:09.000000000 -0600
> @@ -298,7 +298,6 @@ static int scsi_req_map_sg(struct reques
> page = sg_page(sg);
> off = sg->offset;
> len = sg->length;
> - data_len += len;
>
> while (len > 0 && data_len > 0) {
> /*
>
>
> Did this ever get sent to the stable team?
>
> Regards
> Mark
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
