From: "Darrick J. Wong" <djwong@xxxxxxxxxx>
It appears that the LSI SAS 1064E chip needs to be reset after a
suspend/resume cycle before the driver attempts further communications with
the chip. Without this patch, resuming the chip results in this error
message being printed repeatedly and no more disk I/O.
mptbase: ioc0: ERROR - Invalid IOC facts reply, msgLength=0 offsetof=6!
So far it seems to fix suspend/resume on all the MPT Fusion cards I have
(SAS and U320 SCSI) but since I don't know the internals of that chip I
can't say for sure if this is a proper fix.
Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
Cc: "Moore, Eric" <Eric.Moore@xxxxxxx>
Cc: <Sathya.Prakash@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/message/fusion/mptbase.c | 6 ++++++
1 file changed, 6 insertions(+)
diff -puN drivers/message/fusion/mptbase.c~mptbase-reset-ioc-initiator-during-pci-resume drivers/message/fusion/mptbase.c
--- a/drivers/message/fusion/mptbase.c~mptbase-reset-ioc-initiator-during-pci-resume
+++ a/drivers/message/fusion/mptbase.c
@@ -1852,6 +1852,12 @@ mpt_resume(struct pci_dev *pdev)
(mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
CHIPREG_READ32(&ioc->chip->Doorbell));
+ /* put ioc into READY_STATE */
+ if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
+ printk(MYIOC_s_ERR_FMT
+ "pci-resume: IOC msg unit reset failed!\n", ioc->name);
+ }
+
/* bring ioc to operational state */
if ((recovery_state = mpt_do_ioc_recovery(ioc,
MPT_HOSTEVENT_IOC_RECOVER, CAN_SLEEP)) != 0) {
_
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
