Bart Van Assche wrote:
Since the focus of this thread shifted somewhat in the last few
messages, I'll try to summarize what has been discussed so far:
- There was a number of participants who joined this discussion
spontaneously. This suggests that there is considerable interest in
networked storage and iSCSI.
- It has been motivated why iSCSI makes sense as a storage protocol
(compared to ATA over Ethernet and Fibre Channel over Ethernet).
- The direct I/O performance results for block transfer sizes below 64
KB are a meaningful benchmark for storage target implementations.
- It has been discussed whether an iSCSI target should be implemented
in user space or in kernel space. It is clear now that an
implementation in the kernel can be made faster than a user space
implementation (http://kerneltrap.org/mailarchive/linux-kernel/2008/2/4/714804).
Regarding existing implementations, measurements have a.o. shown that
SCST is faster than STGT (30% with the following setup: iSCSI via
IPoIB and direct I/O block transfers with a size of 512 bytes).
- It has been discussed which iSCSI target implementation should be in
the mainstream Linux kernel. There is no agreement on this subject
yet. The short-term options are as follows:
1) Do not integrate any new iSCSI target implementation in the
mainstream Linux kernel.
2) Add one of the existing in-kernel iSCSI target implementations to
the kernel, e.g. SCST or PyX/LIO.
3) Create a new in-kernel iSCSI target implementation that combines
the advantages of the existing iSCSI kernel target implementations
(iETD, STGT, SCST and PyX/LIO).
As an iSCSI user, I prefer option (3). The big question is whether the
various storage target authors agree with this ?
I tend to agree with some important notes:
1. IET should be excluded from this list, iSCSI-SCST is IET updated for
SCST framework with a lot of bugfixes and improvements.
2. I think, everybody will agree that Linux iSCSI target should work
over some standard SCSI target framework. Hence the choice gets
narrower: SCST vs STGT. I don't think there's a way for a dedicated
iSCSI target (i.e. PyX/LIO) in the mainline, because of a lot of code
duplication. Nicholas could decide to move to either existing framework
(although, frankly, I don't think there's a possibility for in-kernel
iSCSI target and user space SCSI target framework) and if he decide to
go with SCST, I'll be glad to offer my help and support and wouldn't
care if LIO-SCST eventually replaced iSCSI-SCST. The better one should win.
Vlad
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html