[PATCH 2.6.24] bugfix for an overflow condition in usb storage & isd200.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Greg KH <greg@xxxxxxxxx> rote:
> As this is a regression and hits 2.6.24, can you send the final version
> of this patch to the stable@xxxxxxxxxx address so we can get it into the
> 2.6.24.y tree?
> 
> thanks,
> 
> greg k-h

Mark - This is for you on top of vanila v2.6.24 kernel from Linus.

---

  scsi_scan is issuing a 36-byte INQUIRY request to llds. isd200 would
  volunteer 96 bytes of INQUIRY. This caused an overflow condition in
  protocol.c usb_stor_access_xfer_buf(). So first fix is to
  usb_stor_access_xfer_buf() to properly handle overflow/underflow conditions.
  Then usb_stor_set_xfer_buf() should report this condition as a negative
  resid. Should we also set cmnd->status in the overflow condition?

  Then also isd200.c is fixed to only return the type of INQUIRY && SENSE
  the upper layer asked for.

Signed-off-by: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
---
 drivers/usb/storage/isd200.c   |    7 +++++--
 drivers/usb/storage/protocol.c |   13 +++++++++----
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 49ba6c0..8186e93 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1238,6 +1238,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us,
 	unsigned long lba;
 	unsigned long blockCount;
 	unsigned char senseData[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+	unsigned xfer_len;
 
 	memset(ataCdb, 0, sizeof(union ata_cdb));
 
@@ -1247,8 +1248,9 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us,
 		US_DEBUGP("   ATA OUT - INQUIRY\n");
 
 		/* copy InquiryData */
+		xfer_len = min(sizeof(info->InquiryData), scsi_bufflen(srb));
 		usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData,
-				sizeof(info->InquiryData), srb);
+					xfer_len, srb);
 		srb->result = SAM_STAT_GOOD;
 		sendToTransport = 0;
 		break;
@@ -1257,7 +1259,8 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us,
 		US_DEBUGP("   ATA OUT - SCSIOP_MODE_SENSE\n");
 
 		/* Initialize the return buffer */
-		usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb);
+		xfer_len = min(sizeof(senseData), scsi_bufflen(srb));
+		usb_stor_set_xfer_buf(senseData, xfer_len, srb);
 
 		if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED)
 		{
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index 889622b..038a284 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -194,7 +194,7 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer,
 		 * and the starting offset within the page, and update
 		 * the *offset and *index values for the next loop. */
 		cnt = 0;
-		while (cnt < buflen) {
+		while (cnt < buflen && sg) {
 			struct page *page = sg_page(sg) +
 					((sg->offset + *offset) >> PAGE_SHIFT);
 			unsigned int poff =
@@ -248,9 +248,14 @@ void usb_stor_set_xfer_buf(unsigned char *buffer,
 {
 	unsigned int offset = 0;
 	struct scatterlist *sg = NULL;
+	unsigned count;
 
-	usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset,
+	count = usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset,
 			TO_XFER_BUF);
-	if (buflen < srb->request_bufflen)
-		srb->resid = srb->request_bufflen - buflen;
+
+	/* Check for overflow */
+	if (buflen > scsi_bufflen(srb))
+		count = buflen;
+
+	scsi_set_resid(srb, scsi_bufflen(srb) - count);
 }
-- 
1.5.3.3


-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux