Re: sata_nv does not function in kernel > 2.6.20.21

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> Error -16 is EBUSY, which causes the driver load to fail due to the 
> "Unable to reserve mem region" message.
> 
> This means that the sata_nv driver needed to use PCI BAR 6, but was 
> unable to for some reason.  Given that sata_nv uses devres like other 
> libata drivers, IMO the likely cause is outside the ATA subsystem (PCI? 
> ACPI?).

Actually it looks to me like there is something very odd going on here.
The sata_nv code checks each of the 6 resources exists (wrongly - it does
it before pcim_enable_device so the check is probably not valid). That
would report -ENODEV.

EBUSY implies all 6 resources were assigned but one couldn't be mapped.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux