Made link speed and link topology modifiable via sysfs
Make scatter gather Segment Count into a module parameter.
Signed-off-by: James Smart <James.Smart@xxxxxxxxxx>
diff -upNr a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
--- a/drivers/scsi/lpfc/lpfc_attr.c 2008-01-11 01:04:21.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_attr.c 2008-01-11 01:23:43.000000000 -0500
@@ -45,6 +45,10 @@
#define LPFC_MIN_DEVLOSS_TMO 1
#define LPFC_MAX_DEVLOSS_TMO 255
+#define LPFC_MAX_LINK_SPEED 8
+#define LPFC_LINK_SPEED_BITMAP 0x00000117
+#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8"
+
static void
lpfc_jedec_to_ascii(int incr, char hdw[])
{
@@ -258,8 +262,7 @@ lpfc_issue_lip(struct Scsi_Host *shost)
int mbxstatus = MBXERR_ERROR;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) ||
- (vport->port_state != LPFC_VPORT_READY))
+ (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO))
return -EPERM;
pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
@@ -1405,7 +1408,33 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1,
# Set loop mode if you want to run as an NL_Port. Value range is [0,0x6].
# Default value is 0.
*/
-LPFC_ATTR_RW(topology, 0, 0, 6, "Select Fibre Channel topology");
+static int
+lpfc_topology_set(struct lpfc_hba *phba, int val)
+{
+ int err;
+ uint32_t prev_val;
+ if (val >= 0 && val <= 6) {
+ prev_val = phba->cfg_topology;
+ phba->cfg_topology = val;
+ err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
+ if (err)
+ phba->cfg_topology = prev_val;
+ return err;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0467 lpfc_topology attribute cannot be set to %d, "
+ "allowed range is [0, 6]\n",
+ phba->brd_no, val);
+ return -EINVAL;
+}
+static int lpfc_topology = 0;
+module_param(lpfc_topology, int, 0);
+MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
+lpfc_param_show(topology)
+lpfc_param_init(topology, 0, 0, 6)
+lpfc_param_store(topology)
+static CLASS_DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
+ lpfc_topology_show, lpfc_topology_store);
/*
# lpfc_link_speed: Link speed selection for initializing the Fibre Channel
@@ -1417,7 +1446,59 @@ LPFC_ATTR_RW(topology, 0, 0, 6, "Select
# 8 = 8 Gigabaud
# Value range is [0,8]. Default value is 0.
*/
-LPFC_ATTR_R(link_speed, 0, 0, 8, "Select link speed");
+static int
+lpfc_link_speed_set(struct lpfc_hba *phba, int val)
+{
+ int err;
+ uint32_t prev_val;
+
+ if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
+ ((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
+ ((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
+ ((val == LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||
+ ((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)))
+ return -EINVAL;
+
+ if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
+ && (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
+ prev_val = phba->cfg_link_speed;
+ phba->cfg_link_speed = val;
+ err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
+ if (err)
+ phba->cfg_link_speed = prev_val;
+ return err;
+ }
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "%d:0469 lpfc_link_speed attribute cannot be set to %d, "
+ "allowed range is [0, 8]\n",
+ phba->brd_no, val);
+ return -EINVAL;
+}
+
+static int lpfc_link_speed = 0;
+module_param(lpfc_link_speed, int, 0);
+MODULE_PARM_DESC(lpfc_link_speed, "Select link speed");
+lpfc_param_show(link_speed)
+static int
+lpfc_link_speed_init(struct lpfc_hba *phba, int val)
+{
+ if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
+ && (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
+ phba->cfg_link_speed = val;
+ return 0;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0454 lpfc_link_speed attribute cannot "
+ "be set to %d, allowed values are "
+ "["LPFC_LINK_SPEED_STRING"]\n", val);
+ phba->cfg_link_speed = 0;
+ return -EINVAL;
+}
+
+lpfc_param_store(link_speed)
+static CLASS_DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
+ lpfc_link_speed_show, lpfc_link_speed_store);
/*
# lpfc_fcp_class: Determines FC class to use for the FCP protocol.
@@ -1531,6 +1612,15 @@ LPFC_ATTR_R(enable_hba_reset, 1, 0, 1, "
*/
LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat.");
+/*
+ * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count
+ * This value can be set to values between 64 and 256. The default value is
+ * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer
+ * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE).
+ */
+LPFC_ATTR_R(sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, LPFC_DEFAULT_SG_SEG_CNT,
+ LPFC_MAX_SG_SEG_CNT, "Max Scatter Gather Segment Count");
+
struct class_device_attribute *lpfc_hba_attrs[] = {
&class_device_attr_info,
&class_device_attr_serialnum,
@@ -1583,6 +1673,7 @@ struct class_device_attribute *lpfc_hba_
&class_device_attr_lpfc_soft_wwn_enable,
&class_device_attr_lpfc_enable_hba_reset,
&class_device_attr_lpfc_enable_hba_heartbeat,
+ &class_device_attr_lpfc_sg_seg_cnt,
NULL,
};
@@ -2490,18 +2581,18 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
phba->cfg_poll = lpfc_poll;
phba->cfg_soft_wwnn = 0L;
phba->cfg_soft_wwpn = 0L;
- /*
- * The total number of segments is the configuration value plus 2
- * since the IOCB need a command and response bde.
- */
- phba->cfg_sg_seg_cnt = LPFC_SG_SEG_CNT + 2;
+ lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
+ /* Also reinitialize the host templates with new values. */
+ lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
/*
* Since the sg_tablesize is module parameter, the sg_dma_buf_size
- * used to create the sg_dma_buf_pool must be dynamically calculated
+ * used to create the sg_dma_buf_pool must be dynamically calculated.
+ * 2 segments are added since the IOCB needs a command and response bde.
*/
phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp) +
- (phba->cfg_sg_seg_cnt * sizeof(struct ulp_bde64));
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
return;
}
diff -upNr a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
--- a/drivers/scsi/lpfc/lpfc.h 2008-01-11 01:03:53.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc.h 2008-01-11 01:23:43.000000000 -0500
@@ -29,7 +29,8 @@ struct lpfc_sli2_slim;
#define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact
the NameServer before giving up. */
#define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */
-#define LPFC_SG_SEG_CNT 64 /* sg element count per scsi cmnd */
+#define LPFC_DEFAULT_SG_SEG_CNT 64 /* sg element count per scsi cmnd */
+#define LPFC_MAX_SG_SEG_CNT 256 /* sg element count per scsi cmnd */
#define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */
#define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */
diff -upNr a/drivers/scsi/lpfc/lpfc_init.c.orig b/drivers/scsi/lpfc/lpfc_init.c.orig
--- a/drivers/scsi/lpfc/lpfc_init.c.orig 2008-01-11 01:04:13.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_init.c.orig 1969-12-31 19:00:00.000000000 -0500
@@ -1,2474 +0,0 @@
-/*******************************************************************
- * This file is part of the Emulex Linux Device Driver for *
- * Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2007 Emulex. All rights reserved. *
- * EMULEX and SLI are trademarks of Emulex. *
- * www.emulex.com *
- * Portions Copyright (C) 2004-2005 Christoph Hellwig *
- * *
- * This program is free software; you can redistribute it and/or *
- * modify it under the terms of version 2 of the GNU General *
- * Public License as published by the Free Software Foundation. *
- * This program is distributed in the hope that it will be useful. *
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
- * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
- * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
- * TO BE LEGALLY INVALID. See the GNU General Public License for *
- * more details, a copy of which can be found in the file COPYING *
- * included with this package. *
- *******************************************************************/
-
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/idr.h>
-#include <linux/interrupt.h>
-#include <linux/kthread.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/ctype.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_transport_fc.h>
-
-#include "lpfc_hw.h"
-#include "lpfc_sli.h"
-#include "lpfc_disc.h"
-#include "lpfc_scsi.h"
-#include "lpfc.h"
-#include "lpfc_logmsg.h"
-#include "lpfc_crtn.h"
-#include "lpfc_vport.h"
-#include "lpfc_version.h"
-
-static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
-static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
-static int lpfc_post_rcv_buf(struct lpfc_hba *);
-
-static struct scsi_transport_template *lpfc_transport_template = NULL;
-static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
-static DEFINE_IDR(lpfc_hba_index);
-
-/************************************************************************/
-/* */
-/* lpfc_config_port_prep */
-/* This routine will do LPFC initialization prior to the */
-/* CONFIG_PORT mailbox command. This will be initialized */
-/* as a SLI layer callback routine. */
-/* This routine returns 0 on success or -ERESTART if it wants */
-/* the SLI layer to reset the HBA and try again. Any */
-/* other return value indicates an error. */
-/* */
-/************************************************************************/
-int
-lpfc_config_port_prep(struct lpfc_hba *phba)
-{
- lpfc_vpd_t *vp = &phba->vpd;
- int i = 0, rc;
- LPFC_MBOXQ_t *pmb;
- MAILBOX_t *mb;
- char *lpfc_vpd_data = NULL;
- uint16_t offset = 0;
- static char licensed[56] =
- "key unlock for use with gnu public licensed code only\0";
- static int init_key = 1;
-
- pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!pmb) {
- phba->link_state = LPFC_HBA_ERROR;
- return -ENOMEM;
- }
-
- mb = &pmb->mb;
- phba->link_state = LPFC_INIT_MBX_CMDS;
-
- if (lpfc_is_LC_HBA(phba->pcidev->device)) {
- if (init_key) {
- uint32_t *ptext = (uint32_t *) licensed;
-
- for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
- *ptext = cpu_to_be32(*ptext);
- init_key = 0;
- }
-
- lpfc_read_nv(phba, pmb);
- memset((char*)mb->un.varRDnvp.rsvd3, 0,
- sizeof (mb->un.varRDnvp.rsvd3));
- memcpy((char*)mb->un.varRDnvp.rsvd3, licensed,
- sizeof (licensed));
-
- rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
-
- if (rc != MBX_SUCCESS) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
- "0324 Config Port initialization "
- "error, mbxCmd x%x READ_NVPARM, "
- "mbxStatus x%x\n",
- mb->mbxCommand, mb->mbxStatus);
- mempool_free(pmb, phba->mbox_mem_pool);
- return -ERESTART;
- }
- memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename,
- sizeof(phba->wwnn));
- memcpy(phba->wwpn, (char *)mb->un.varRDnvp.portname,
- sizeof(phba->wwpn));
- }
-
- phba->sli3_options = 0x0;
-
- /* Setup and issue mailbox READ REV command */
- lpfc_read_rev(phba, pmb);
- rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
- if (rc != MBX_SUCCESS) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0439 Adapter failed to init, mbxCmd x%x "
- "READ_REV, mbxStatus x%x\n",
- mb->mbxCommand, mb->mbxStatus);
- mempool_free( pmb, phba->mbox_mem_pool);
- return -ERESTART;
- }
-
-
- /*
- * The value of rr must be 1 since the driver set the cv field to 1.
- * This setting requires the FW to set all revision fields.
- */
- if (mb->un.varRdRev.rr == 0) {
- vp->rev.rBit = 0;
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0440 Adapter failed to init, READ_REV has "
- "missing revision information.\n");
- mempool_free(pmb, phba->mbox_mem_pool);
- return -ERESTART;
- }
-
- if (phba->sli_rev == 3 && !mb->un.varRdRev.v3rsp)
- return -EINVAL;
-
- /* Save information as VPD data */
- vp->rev.rBit = 1;
- memcpy(&vp->sli3Feat, &mb->un.varRdRev.sli3Feat, sizeof(uint32_t));
- vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev;
- memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16);
- vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev;
- memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16);
- vp->rev.biuRev = mb->un.varRdRev.biuRev;
- vp->rev.smRev = mb->un.varRdRev.smRev;
- vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev;
- vp->rev.endecRev = mb->un.varRdRev.endecRev;
- vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh;
- vp->rev.fcphLow = mb->un.varRdRev.fcphLow;
- vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh;
- vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow;
- vp->rev.postKernRev = mb->un.varRdRev.postKernRev;
- vp->rev.opFwRev = mb->un.varRdRev.opFwRev;
-
- /* If the sli feature level is less then 9, we must
- * tear down all RPIs and VPIs on link down if NPIV
- * is enabled.
- */
- if (vp->rev.feaLevelHigh < 9)
- phba->sli3_options |= LPFC_SLI3_VPORT_TEARDOWN;
-
- if (lpfc_is_LC_HBA(phba->pcidev->device))
- memcpy(phba->RandomData, (char *)&mb->un.varWords[24],
- sizeof (phba->RandomData));
-
- /* Get adapter VPD information */
- pmb->context2 = kmalloc(DMP_RSP_SIZE, GFP_KERNEL);
- if (!pmb->context2)
- goto out_free_mbox;
- lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL);
- if (!lpfc_vpd_data)
- goto out_free_context2;
-
- do {
- lpfc_dump_mem(phba, pmb, offset);
- rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
-
- if (rc != MBX_SUCCESS) {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0441 VPD not present on adapter, "
- "mbxCmd x%x DUMP VPD, mbxStatus x%x\n",
- mb->mbxCommand, mb->mbxStatus);
- mb->un.varDmp.word_cnt = 0;
- }
- if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
- mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
- lpfc_sli_pcimem_bcopy(pmb->context2, lpfc_vpd_data + offset,
- mb->un.varDmp.word_cnt);
- offset += mb->un.varDmp.word_cnt;
- } while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE);
- lpfc_parse_vpd(phba, lpfc_vpd_data, offset);
-
- kfree(lpfc_vpd_data);
-out_free_context2:
- kfree(pmb->context2);
-out_free_mbox:
- mempool_free(pmb, phba->mbox_mem_pool);
- return 0;
-}
-
-/* Completion handler for config async event mailbox command. */
-static void
-lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
-{
- if (pmboxq->mb.mbxStatus == MBX_SUCCESS)
- phba->temp_sensor_support = 1;
- else
- phba->temp_sensor_support = 0;
- mempool_free(pmboxq, phba->mbox_mem_pool);
- return;
-}
-
-/************************************************************************/
-/* */
-/* lpfc_config_port_post */
-/* This routine will do LPFC initialization after the */
-/* CONFIG_PORT mailbox command. This will be initialized */
-/* as a SLI layer callback routine. */
-/* This routine returns 0 on success. Any other return value */
-/* indicates an error. */
-/* */
-/************************************************************************/
-int
-lpfc_config_port_post(struct lpfc_hba *phba)
-{
- struct lpfc_vport *vport = phba->pport;
- LPFC_MBOXQ_t *pmb;
- MAILBOX_t *mb;
- struct lpfc_dmabuf *mp;
- struct lpfc_sli *psli = &phba->sli;
- uint32_t status, timeout;
- int i, j;
- int rc;
-
- spin_lock_irq(&phba->hbalock);
- /*
- * If the Config port completed correctly the HBA is not
- * over heated any more.
- */
- if (phba->over_temp_state == HBA_OVER_TEMP)
- phba->over_temp_state = HBA_NORMAL_TEMP;
- spin_unlock_irq(&phba->hbalock);
-
- pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!pmb) {
- phba->link_state = LPFC_HBA_ERROR;
- return -ENOMEM;
- }
- mb = &pmb->mb;
-
- /* Get login parameters for NID. */
- lpfc_read_sparam(phba, pmb, 0);
- pmb->vport = vport;
- if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0448 Adapter failed init, mbxCmd x%x "
- "READ_SPARM mbxStatus x%x\n",
- mb->mbxCommand, mb->mbxStatus);
- phba->link_state = LPFC_HBA_ERROR;
- mp = (struct lpfc_dmabuf *) pmb->context1;
- mempool_free( pmb, phba->mbox_mem_pool);
- lpfc_mbuf_free(phba, mp->virt, mp->phys);
- kfree(mp);
- return -EIO;
- }
-
- mp = (struct lpfc_dmabuf *) pmb->context1;
-
- memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
- lpfc_mbuf_free(phba, mp->virt, mp->phys);
- kfree(mp);
- pmb->context1 = NULL;
-
- if (phba->cfg_soft_wwnn)
- u64_to_wwn(phba->cfg_soft_wwnn,
- vport->fc_sparam.nodeName.u.wwn);
- if (phba->cfg_soft_wwpn)
- u64_to_wwn(phba->cfg_soft_wwpn,
- vport->fc_sparam.portName.u.wwn);
- memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
- sizeof (struct lpfc_name));
- memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
- sizeof (struct lpfc_name));
- /* If no serial number in VPD data, use low 6 bytes of WWNN */
- /* This should be consolidated into parse_vpd ? - mr */
- if (phba->SerialNumber[0] == 0) {
- uint8_t *outptr;
-
- outptr = &vport->fc_nodename.u.s.IEEE[0];
- for (i = 0; i < 12; i++) {
- status = *outptr++;
- j = ((status & 0xf0) >> 4);
- if (j <= 9)
- phba->SerialNumber[i] =
- (char)((uint8_t) 0x30 + (uint8_t) j);
- else
- phba->SerialNumber[i] =
- (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
- i++;
- j = (status & 0xf);
- if (j <= 9)
- phba->SerialNumber[i] =
- (char)((uint8_t) 0x30 + (uint8_t) j);
- else
- phba->SerialNumber[i] =
- (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
- }
- }
-
- lpfc_read_config(phba, pmb);
- pmb->vport = vport;
- if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0453 Adapter failed to init, mbxCmd x%x "
- "READ_CONFIG, mbxStatus x%x\n",
- mb->mbxCommand, mb->mbxStatus);
- phba->link_state = LPFC_HBA_ERROR;
- mempool_free( pmb, phba->mbox_mem_pool);
- return -EIO;
- }
-
- /* Reset the DFT_HBA_Q_DEPTH to the max xri */
- if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
- phba->cfg_hba_queue_depth =
- mb->un.varRdConfig.max_xri + 1;
-
- phba->lmt = mb->un.varRdConfig.lmt;
-
- /* Get the default values for Model Name and Description */
- lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
-
- if ((phba->cfg_link_speed > LINK_SPEED_10G)
- || ((phba->cfg_link_speed == LINK_SPEED_1G)
- && !(phba->lmt & LMT_1Gb))
- || ((phba->cfg_link_speed == LINK_SPEED_2G)
- && !(phba->lmt & LMT_2Gb))
- || ((phba->cfg_link_speed == LINK_SPEED_4G)
- && !(phba->lmt & LMT_4Gb))
- || ((phba->cfg_link_speed == LINK_SPEED_8G)
- && !(phba->lmt & LMT_8Gb))
- || ((phba->cfg_link_speed == LINK_SPEED_10G)
- && !(phba->lmt & LMT_10Gb))) {
- /* Reset link speed to auto */
- lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT,
- "1302 Invalid speed for this board: "
- "Reset link speed to auto: x%x\n",
- phba->cfg_link_speed);
- phba->cfg_link_speed = LINK_SPEED_AUTO;
- }
-
- phba->link_state = LPFC_LINK_DOWN;
-
- /* Only process IOCBs on ELS ring till hba_state is READY */
- if (psli->ring[psli->extra_ring].cmdringaddr)
- psli->ring[psli->extra_ring].flag |= LPFC_STOP_IOCB_EVENT;
- if (psli->ring[psli->fcp_ring].cmdringaddr)
- psli->ring[psli->fcp_ring].flag |= LPFC_STOP_IOCB_EVENT;
- if (psli->ring[psli->next_ring].cmdringaddr)
- psli->ring[psli->next_ring].flag |= LPFC_STOP_IOCB_EVENT;
-
- /* Post receive buffers for desired rings */
- if (phba->sli_rev != 3)
- lpfc_post_rcv_buf(phba);
-
- /* Enable appropriate host interrupts */
- spin_lock_irq(&phba->hbalock);
- status = readl(phba->HCregaddr);
- status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
- if (psli->num_rings > 0)
- status |= HC_R0INT_ENA;
- if (psli->num_rings > 1)
- status |= HC_R1INT_ENA;
- if (psli->num_rings > 2)
- status |= HC_R2INT_ENA;
- if (psli->num_rings > 3)
- status |= HC_R3INT_ENA;
-
- if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) &&
- (phba->cfg_poll & DISABLE_FCP_RING_INT))
- status &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
-
- writel(status, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
- spin_unlock_irq(&phba->hbalock);
-
- /*
- * Setup the ring 0 (els) timeout handler
- */
- timeout = phba->fc_ratov << 1;
- mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout);
- mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
- phba->hb_outstanding = 0;
- phba->last_completion_time = jiffies;
-
- lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed);
- pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- pmb->vport = vport;
- rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
- lpfc_set_loopback_flag(phba);
- if (rc != MBX_SUCCESS) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0454 Adapter failed to init, mbxCmd x%x "
- "INIT_LINK, mbxStatus x%x\n",
- mb->mbxCommand, mb->mbxStatus);
-
- /* Clear all interrupt enable conditions */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
- /* Clear all pending interrupts */
- writel(0xffffffff, phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
-
- phba->link_state = LPFC_HBA_ERROR;
- if (rc != MBX_BUSY)
- mempool_free(pmb, phba->mbox_mem_pool);
- return -EIO;
- }
- /* MBOX buffer will be freed in mbox compl */
- pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- lpfc_config_async(phba, pmb, LPFC_ELS_RING);
- pmb->mbox_cmpl = lpfc_config_async_cmpl;
- pmb->vport = phba->pport;
- rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
-
- if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
- lpfc_printf_log(phba,
- KERN_ERR,
- LOG_INIT,
- "0456 Adapter failed to issue "
- "ASYNCEVT_ENABLE mbox status x%x \n.",
- rc);
- mempool_free(pmb, phba->mbox_mem_pool);
- }
- return (0);
-}
-
-/************************************************************************/
-/* */
-/* lpfc_hba_down_prep */
-/* This routine will do LPFC uninitialization before the */
-/* HBA is reset when bringing down the SLI Layer. This will be */
-/* initialized as a SLI layer callback routine. */
-/* This routine returns 0 on success. Any other return value */
-/* indicates an error. */
-/* */
-/************************************************************************/
-int
-lpfc_hba_down_prep(struct lpfc_hba *phba)
-{
- /* Disable interrupts */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
-
- lpfc_cleanup_discovery_resources(phba->pport);
- return 0;
-}
-
-/************************************************************************/
-/* */
-/* lpfc_hba_down_post */
-/* This routine will do uninitialization after the HBA is reset */
-/* when bringing down the SLI Layer. */
-/* This routine returns 0 on success. Any other return value */
-/* indicates an error. */
-/* */
-/************************************************************************/
-int
-lpfc_hba_down_post(struct lpfc_hba *phba)
-{
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
- struct lpfc_dmabuf *mp, *next_mp;
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
- LIST_HEAD(completions);
- int i;
-
- if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)
- lpfc_sli_hbqbuf_free_all(phba);
- else {
- /* Cleanup preposted buffers on the ELS ring */
- pring = &psli->ring[LPFC_ELS_RING];
- list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
- list_del(&mp->list);
- pring->postbufq_cnt--;
- lpfc_mbuf_free(phba, mp->virt, mp->phys);
- kfree(mp);
- }
- }
-
- spin_lock_irq(&phba->hbalock);
- for (i = 0; i < psli->num_rings; i++) {
- pring = &psli->ring[i];
-
- /* At this point in time the HBA is either reset or DOA. Either
- * way, nothing should be on txcmplq as it will NEVER complete.
- */
- list_splice_init(&pring->txcmplq, &completions);
- pring->txcmplq_cnt = 0;
- spin_unlock_irq(&phba->hbalock);
-
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq,
- list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
-
- lpfc_sli_abort_iocb_ring(phba, pring);
- spin_lock_irq(&phba->hbalock);
- }
- spin_unlock_irq(&phba->hbalock);
-
- return 0;
-}
-
-/* HBA heart beat timeout handler */
-static void
-lpfc_hb_timeout(unsigned long ptr)
-{
- struct lpfc_hba *phba;
- unsigned long iflag;
-
- phba = (struct lpfc_hba *)ptr;
- spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
- if (!(phba->pport->work_port_events & WORKER_HB_TMO))
- phba->pport->work_port_events |= WORKER_HB_TMO;
- spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);
-
- if (phba->work_wait)
- wake_up(phba->work_wait);
- return;
-}
-
-static void
-lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
-{
- unsigned long drvr_flag;
-
- spin_lock_irqsave(&phba->hbalock, drvr_flag);
- phba->hb_outstanding = 0;
- spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
-
- mempool_free(pmboxq, phba->mbox_mem_pool);
- if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) &&
- !(phba->link_state == LPFC_HBA_ERROR) &&
- !(phba->pport->load_flag & FC_UNLOADING))
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
- return;
-}
-
-void
-lpfc_hb_timeout_handler(struct lpfc_hba *phba)
-{
- LPFC_MBOXQ_t *pmboxq;
- struct lpfc_dmabuf *buf_ptr;
- int retval;
- struct lpfc_sli *psli = &phba->sli;
- LIST_HEAD(completions);
-
- if ((phba->link_state == LPFC_HBA_ERROR) ||
- (phba->pport->load_flag & FC_UNLOADING) ||
- (phba->pport->fc_flag & FC_OFFLINE_MODE))
- return;
-
- spin_lock_irq(&phba->pport->work_port_lock);
- /* If the timer is already canceled do nothing */
- if (!(phba->pport->work_port_events & WORKER_HB_TMO)) {
- spin_unlock_irq(&phba->pport->work_port_lock);
- return;
- }
-
- if (time_after(phba->last_completion_time + LPFC_HB_MBOX_INTERVAL * HZ,
- jiffies)) {
- spin_unlock_irq(&phba->pport->work_port_lock);
- if (!phba->hb_outstanding)
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
- else
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
- return;
- }
- spin_unlock_irq(&phba->pport->work_port_lock);
-
- if (phba->elsbuf_cnt &&
- (phba->elsbuf_cnt == phba->elsbuf_prev_cnt)) {
- spin_lock_irq(&phba->hbalock);
- list_splice_init(&phba->elsbuf, &completions);
- phba->elsbuf_cnt = 0;
- phba->elsbuf_prev_cnt = 0;
- spin_unlock_irq(&phba->hbalock);
-
- while (!list_empty(&completions)) {
- list_remove_head(&completions, buf_ptr,
- struct lpfc_dmabuf, list);
- lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
- kfree(buf_ptr);
- }
- }
- phba->elsbuf_prev_cnt = phba->elsbuf_cnt;
-
- /* If there is no heart beat outstanding, issue a heartbeat command */
- if (phba->cfg_enable_hba_heartbeat) {
- if (!phba->hb_outstanding) {
- pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
- if (!pmboxq) {
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
- return;
- }
-
- lpfc_heart_beat(phba, pmboxq);
- pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
- pmboxq->vport = phba->pport;
- retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
-
- if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
- mempool_free(pmboxq, phba->mbox_mem_pool);
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
- return;
- }
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
- phba->hb_outstanding = 1;
- return;
- } else {
- /*
- * If heart beat timeout called with hb_outstanding set
- * we need to take the HBA offline.
- */
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0459 Adapter heartbeat failure, "
- "taking this port offline.\n");
-
- spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
- spin_unlock_irq(&phba->hbalock);
-
- lpfc_offline_prep(phba);
- lpfc_offline(phba);
- lpfc_unblock_mgmt_io(phba);
- phba->link_state = LPFC_HBA_ERROR;
- lpfc_hba_down_post(phba);
- }
- }
-}
-
-static void
-lpfc_offline_eratt(struct lpfc_hba *phba)
-{
- struct lpfc_sli *psli = &phba->sli;
-
- spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
- spin_unlock_irq(&phba->hbalock);
- lpfc_offline_prep(phba);
-
- lpfc_offline(phba);
- lpfc_reset_barrier(phba);
- lpfc_sli_brdreset(phba);
- lpfc_hba_down_post(phba);
- lpfc_sli_brdready(phba, HS_MBRDY);
- lpfc_unblock_mgmt_io(phba);
- phba->link_state = LPFC_HBA_ERROR;
- return;
-}
-
-/************************************************************************/
-/* */
-/* lpfc_handle_eratt */
-/* This routine will handle processing a Host Attention */
-/* Error Status event. This will be initialized */
-/* as a SLI layer callback routine. */
-/* */
-/************************************************************************/
-void
-lpfc_handle_eratt(struct lpfc_hba *phba)
-{
- struct lpfc_vport *vport = phba->pport;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
- struct lpfc_vport **vports;
- uint32_t event_data;
- unsigned long temperature;
- struct temp_event temp_event_data;
- struct Scsi_Host *shost;
- int i;
-
- /* If the pci channel is offline, ignore possible errors,
- * since we cannot communicate with the pci card anyway. */
- if (pci_channel_offline(phba->pcidev))
- return;
- /* If resets are disabled then leave the HBA alone and return */
- if (!phba->cfg_enable_hba_reset)
- return;
-
- if (phba->work_hs & HS_FFER6 ||
- phba->work_hs & HS_FFER5) {
- /* Re-establishing Link */
- lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
- "1301 Re-establishing Link "
- "Data: x%x x%x x%x\n",
- phba->work_hs,
- phba->work_status[0], phba->work_status[1]);
- vports = lpfc_create_vport_work_array(phba);
- if (vports != NULL)
- for(i = 0;
- i <= phba->max_vpi && vports[i] != NULL;
- i++){
- shost = lpfc_shost_from_vport(vports[i]);
- spin_lock_irq(shost->host_lock);
- vports[i]->fc_flag |= FC_ESTABLISH_LINK;
- spin_unlock_irq(shost->host_lock);
- }
- lpfc_destroy_vport_work_array(phba, vports);
- spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
- spin_unlock_irq(&phba->hbalock);
-
- /*
- * Firmware stops when it triggled erratt with HS_FFER6.
- * That could cause the I/Os dropped by the firmware.
- * Error iocb (I/O) on txcmplq and let the SCSI layer
- * retry it after re-establishing link.
- */
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
-
-
- /*
- * There was a firmware error. Take the hba offline and then
- * attempt to restart it.
- */
- lpfc_offline_prep(phba);
- lpfc_offline(phba);
- lpfc_sli_brdrestart(phba);
- if (lpfc_online(phba) == 0) { /* Initialize the HBA */
- mod_timer(&phba->fc_estabtmo, jiffies + HZ * 60);
- lpfc_unblock_mgmt_io(phba);
- return;
- }
- lpfc_unblock_mgmt_io(phba);
- } else if (phba->work_hs & HS_CRIT_TEMP) {
- temperature = readl(phba->MBslimaddr + TEMPERATURE_OFFSET);
- temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
- temp_event_data.event_code = LPFC_CRIT_TEMP;
- temp_event_data.data = (uint32_t)temperature;
-
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0459 Adapter maximum temperature exceeded "
- "(%ld), taking this port offline "
- "Data: x%x x%x x%x\n",
- temperature, phba->work_hs,
- phba->work_status[0], phba->work_status[1]);
-
- shost = lpfc_shost_from_vport(phba->pport);
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(temp_event_data),
- (char *) &temp_event_data,
- SCSI_NL_VID_TYPE_PCI
- | PCI_VENDOR_ID_EMULEX);
-
- spin_lock_irq(&phba->hbalock);
- phba->over_temp_state = HBA_OVER_TEMP;
- spin_unlock_irq(&phba->hbalock);
- lpfc_offline_eratt(phba);
-
- } else {
- /* The if clause above forces this code path when the status
- * failure is a value other than FFER6. Do not call the offline
- * twice. This is the adapter hardware error path.
- */
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0457 Adapter Hardware Error "
- "Data: x%x x%x x%x\n",
- phba->work_hs,
- phba->work_status[0], phba->work_status[1]);
-
- event_data = FC_REG_DUMP_EVENT;
- shost = lpfc_shost_from_vport(vport);
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(event_data), (char *) &event_data,
- SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
-
- lpfc_offline_eratt(phba);
- }
-}
-
-/************************************************************************/
-/* */
-/* lpfc_handle_latt */
-/* This routine will handle processing a Host Attention */
-/* Link Status event. This will be initialized */
-/* as a SLI layer callback routine. */
-/* */
-/************************************************************************/
-void
-lpfc_handle_latt(struct lpfc_hba *phba)
-{
- struct lpfc_vport *vport = phba->pport;
- struct lpfc_sli *psli = &phba->sli;
- LPFC_MBOXQ_t *pmb;
- volatile uint32_t control;
- struct lpfc_dmabuf *mp;
- int rc = 0;
-
- pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!pmb) {
- rc = 1;
- goto lpfc_handle_latt_err_exit;
- }
-
- mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
- if (!mp) {
- rc = 2;
- goto lpfc_handle_latt_free_pmb;
- }
-
- mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
- if (!mp->virt) {
- rc = 3;
- goto lpfc_handle_latt_free_mp;
- }
-
- /* Cleanup any outstanding ELS commands */
- lpfc_els_flush_all_cmd(phba);
-
- psli->slistat.link_event++;
- lpfc_read_la(phba, pmb, mp);
- pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la;
- pmb->vport = vport;
- rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED) {
- rc = 4;
- goto lpfc_handle_latt_free_mbuf;
- }
-
- /* Clear Link Attention in HA REG */
- spin_lock_irq(&phba->hbalock);
- writel(HA_LATT, phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
- spin_unlock_irq(&phba->hbalock);
-
- return;
-
-lpfc_handle_latt_free_mbuf:
- lpfc_mbuf_free(phba, mp->virt, mp->phys);
-lpfc_handle_latt_free_mp:
- kfree(mp);
-lpfc_handle_latt_free_pmb:
- mempool_free(pmb, phba->mbox_mem_pool);
-lpfc_handle_latt_err_exit:
- /* Enable Link attention interrupts */
- spin_lock_irq(&phba->hbalock);
- psli->sli_flag |= LPFC_PROCESS_LA;
- control = readl(phba->HCregaddr);
- control |= HC_LAINT_ENA;
- writel(control, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
-
- /* Clear Link Attention in HA REG */
- writel(HA_LATT, phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
- spin_unlock_irq(&phba->hbalock);
- lpfc_linkdown(phba);
- phba->link_state = LPFC_HBA_ERROR;
-
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
- "0300 LATT: Cannot issue READ_LA: Data:%d\n", rc);
-
- return;
-}
-
-/************************************************************************/
-/* */
-/* lpfc_parse_vpd */
-/* This routine will parse the VPD data */
-/* */
-/************************************************************************/
-static int
-lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
-{
- uint8_t lenlo, lenhi;
- int Length;
- int i, j;
- int finished = 0;
- int index = 0;
-
- if (!vpd)
- return 0;
-
- /* Vital Product */
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0455 Vital Product Data: x%x x%x x%x x%x\n",
- (uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2],
- (uint32_t) vpd[3]);
- while (!finished && (index < (len - 4))) {
- switch (vpd[index]) {
- case 0x82:
- case 0x91:
- index += 1;
- lenlo = vpd[index];
- index += 1;
- lenhi = vpd[index];
- index += 1;
- i = ((((unsigned short)lenhi) << 8) + lenlo);
- index += i;
- break;
- case 0x90:
- index += 1;
- lenlo = vpd[index];
- index += 1;
- lenhi = vpd[index];
- index += 1;
- Length = ((((unsigned short)lenhi) << 8) + lenlo);
- if (Length > len - index)
- Length = len - index;
- while (Length > 0) {
- /* Look for Serial Number */
- if ((vpd[index] == 'S') && (vpd[index+1] == 'N')) {
- index += 2;
- i = vpd[index];
- index += 1;
- j = 0;
- Length -= (3+i);
- while(i--) {
- phba->SerialNumber[j++] = vpd[index++];
- if (j == 31)
- break;
- }
- phba->SerialNumber[j] = 0;
- continue;
- }
- else if ((vpd[index] == 'V') && (vpd[index+1] == '1')) {
- phba->vpd_flag |= VPD_MODEL_DESC;
- index += 2;
- i = vpd[index];
- index += 1;
- j = 0;
- Length -= (3+i);
- while(i--) {
- phba->ModelDesc[j++] = vpd[index++];
- if (j == 255)
- break;
- }
- phba->ModelDesc[j] = 0;
- continue;
- }
- else if ((vpd[index] == 'V') && (vpd[index+1] == '2')) {
- phba->vpd_flag |= VPD_MODEL_NAME;
- index += 2;
- i = vpd[index];
- index += 1;
- j = 0;
- Length -= (3+i);
- while(i--) {
- phba->ModelName[j++] = vpd[index++];
- if (j == 79)
- break;
- }
- phba->ModelName[j] = 0;
- continue;
- }
- else if ((vpd[index] == 'V') && (vpd[index+1] == '3')) {
- phba->vpd_flag |= VPD_PROGRAM_TYPE;
- index += 2;
- i = vpd[index];
- index += 1;
- j = 0;
- Length -= (3+i);
- while(i--) {
- phba->ProgramType[j++] = vpd[index++];
- if (j == 255)
- break;
- }
- phba->ProgramType[j] = 0;
- continue;
- }
- else if ((vpd[index] == 'V') && (vpd[index+1] == '4')) {
- phba->vpd_flag |= VPD_PORT;
- index += 2;
- i = vpd[index];
- index += 1;
- j = 0;
- Length -= (3+i);
- while(i--) {
- phba->Port[j++] = vpd[index++];
- if (j == 19)
- break;
- }
- phba->Port[j] = 0;
- continue;
- }
- else {
- index += 2;
- i = vpd[index];
- index += 1;
- index += i;
- Length -= (3 + i);
- }
- }
- finished = 0;
- break;
- case 0x78:
- finished = 1;
- break;
- default:
- index ++;
- break;
- }
- }
-
- return(1);
-}
-
-static void
-lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
-{
- lpfc_vpd_t *vp;
- uint16_t dev_id = phba->pcidev->device;
- int max_speed;
- struct {
- char * name;
- int max_speed;
- char * bus;
- } m = {"<Unknown>", 0, ""};
-
- if (mdp && mdp[0] != '\0'
- && descp && descp[0] != '\0')
- return;
-
- if (phba->lmt & LMT_10Gb)
- max_speed = 10;
- else if (phba->lmt & LMT_8Gb)
- max_speed = 8;
- else if (phba->lmt & LMT_4Gb)
- max_speed = 4;
- else if (phba->lmt & LMT_2Gb)
- max_speed = 2;
- else
- max_speed = 1;
-
- vp = &phba->vpd;
-
- switch (dev_id) {
- case PCI_DEVICE_ID_FIREFLY:
- m = (typeof(m)){"LP6000", max_speed, "PCI"};
- break;
- case PCI_DEVICE_ID_SUPERFLY:
- if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
- m = (typeof(m)){"LP7000", max_speed, "PCI"};
- else
- m = (typeof(m)){"LP7000E", max_speed, "PCI"};
- break;
- case PCI_DEVICE_ID_DRAGONFLY:
- m = (typeof(m)){"LP8000", max_speed, "PCI"};
- break;
- case PCI_DEVICE_ID_CENTAUR:
- if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
- m = (typeof(m)){"LP9002", max_speed, "PCI"};
- else
- m = (typeof(m)){"LP9000", max_speed, "PCI"};
- break;
- case PCI_DEVICE_ID_RFLY:
- m = (typeof(m)){"LP952", max_speed, "PCI"};
- break;
- case PCI_DEVICE_ID_PEGASUS:
- m = (typeof(m)){"LP9802", max_speed, "PCI-X"};
- break;
- case PCI_DEVICE_ID_THOR:
- m = (typeof(m)){"LP10000", max_speed, "PCI-X"};
- break;
- case PCI_DEVICE_ID_VIPER:
- m = (typeof(m)){"LPX1000", max_speed, "PCI-X"};
- break;
- case PCI_DEVICE_ID_PFLY:
- m = (typeof(m)){"LP982", max_speed, "PCI-X"};
- break;
- case PCI_DEVICE_ID_TFLY:
- m = (typeof(m)){"LP1050", max_speed, "PCI-X"};
- break;
- case PCI_DEVICE_ID_HELIOS:
- m = (typeof(m)){"LP11000", max_speed, "PCI-X2"};
- break;
- case PCI_DEVICE_ID_HELIOS_SCSP:
- m = (typeof(m)){"LP11000-SP", max_speed, "PCI-X2"};
- break;
- case PCI_DEVICE_ID_HELIOS_DCSP:
- m = (typeof(m)){"LP11002-SP", max_speed, "PCI-X2"};
- break;
- case PCI_DEVICE_ID_NEPTUNE:
- m = (typeof(m)){"LPe1000", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_NEPTUNE_SCSP:
- m = (typeof(m)){"LPe1000-SP", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_NEPTUNE_DCSP:
- m = (typeof(m)){"LPe1002-SP", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_BMID:
- m = (typeof(m)){"LP1150", max_speed, "PCI-X2"};
- break;
- case PCI_DEVICE_ID_BSMB:
- m = (typeof(m)){"LP111", max_speed, "PCI-X2"};
- break;
- case PCI_DEVICE_ID_ZEPHYR:
- m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_ZEPHYR_SCSP:
- m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_ZEPHYR_DCSP:
- m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_ZMID:
- m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_ZSMB:
- m = (typeof(m)){"LPe111", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_LP101:
- m = (typeof(m)){"LP101", max_speed, "PCI-X"};
- break;
- case PCI_DEVICE_ID_LP10000S:
- m = (typeof(m)){"LP10000-S", max_speed, "PCI"};
- break;
- case PCI_DEVICE_ID_LP11000S:
- m = (typeof(m)){"LP11000-S", max_speed,
- "PCI-X2"};
- break;
- case PCI_DEVICE_ID_LPE11000S:
- m = (typeof(m)){"LPe11000-S", max_speed,
- "PCIe"};
- break;
- case PCI_DEVICE_ID_SAT:
- m = (typeof(m)){"LPe12000", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_SAT_MID:
- m = (typeof(m)){"LPe1250", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_SAT_SMB:
- m = (typeof(m)){"LPe121", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_SAT_DCSP:
- m = (typeof(m)){"LPe12002-SP", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_SAT_SCSP:
- m = (typeof(m)){"LPe12000-SP", max_speed, "PCIe"};
- break;
- case PCI_DEVICE_ID_SAT_S:
- m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"};
- break;
- default:
- m = (typeof(m)){ NULL };
- break;
- }
-
- if (mdp && mdp[0] == '\0')
- snprintf(mdp, 79,"%s", m.name);
- if (descp && descp[0] == '\0')
- snprintf(descp, 255,
- "Emulex %s %dGb %s Fibre Channel Adapter",
- m.name, m.max_speed, m.bus);
-}
-
-/**************************************************/
-/* lpfc_post_buffer */
-/* */
-/* This routine will post count buffers to the */
-/* ring with the QUE_RING_BUF_CN command. This */
-/* allows 3 buffers / command to be posted. */
-/* Returns the number of buffers NOT posted. */
-/**************************************************/
-int
-lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt,
- int type)
-{
- IOCB_t *icmd;
- struct lpfc_iocbq *iocb;
- struct lpfc_dmabuf *mp1, *mp2;
-
- cnt += pring->missbufcnt;
-
- /* While there are buffers to post */
- while (cnt > 0) {
- /* Allocate buffer for command iocb */
- iocb = lpfc_sli_get_iocbq(phba);
- if (iocb == NULL) {
- pring->missbufcnt = cnt;
- return cnt;
- }
- icmd = &iocb->iocb;
-
- /* 2 buffers can be posted per command */
- /* Allocate buffer to post */
- mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
- if (mp1)
- mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp1->phys);
- if (!mp1 || !mp1->virt) {
- kfree(mp1);
- lpfc_sli_release_iocbq(phba, iocb);
- pring->missbufcnt = cnt;
- return cnt;
- }
-
- INIT_LIST_HEAD(&mp1->list);
- /* Allocate buffer to post */
- if (cnt > 1) {
- mp2 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
- if (mp2)
- mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
- &mp2->phys);
- if (!mp2 || !mp2->virt) {
- kfree(mp2);
- lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
- kfree(mp1);
- lpfc_sli_release_iocbq(phba, iocb);
- pring->missbufcnt = cnt;
- return cnt;
- }
-
- INIT_LIST_HEAD(&mp2->list);
- } else {
- mp2 = NULL;
- }
-
- icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys);
- icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys);
- icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE;
- icmd->ulpBdeCount = 1;
- cnt--;
- if (mp2) {
- icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys);
- icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys);
- icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE;
- cnt--;
- icmd->ulpBdeCount = 2;
- }
-
- icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
- icmd->ulpLe = 1;
-
- if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) {
- lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
- kfree(mp1);
- cnt++;
- if (mp2) {
- lpfc_mbuf_free(phba, mp2->virt, mp2->phys);
- kfree(mp2);
- cnt++;
- }
- lpfc_sli_release_iocbq(phba, iocb);
- pring->missbufcnt = cnt;
- return cnt;
- }
- lpfc_sli_ringpostbuf_put(phba, pring, mp1);
- if (mp2)
- lpfc_sli_ringpostbuf_put(phba, pring, mp2);
- }
- pring->missbufcnt = 0;
- return 0;
-}
-
-/************************************************************************/
-/* */
-/* lpfc_post_rcv_buf */
-/* This routine post initial rcv buffers to the configured rings */
-/* */
-/************************************************************************/
-static int
-lpfc_post_rcv_buf(struct lpfc_hba *phba)
-{
- struct lpfc_sli *psli = &phba->sli;
-
- /* Ring 0, ELS / CT buffers */
- lpfc_post_buffer(phba, &psli->ring[LPFC_ELS_RING], LPFC_BUF_RING0, 1);
- /* Ring 2 - FCP no buffers needed */
-
- return 0;
-}
-
-#define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
-
-/************************************************************************/
-/* */
-/* lpfc_sha_init */
-/* */
-/************************************************************************/
-static void
-lpfc_sha_init(uint32_t * HashResultPointer)
-{
- HashResultPointer[0] = 0x67452301;
- HashResultPointer[1] = 0xEFCDAB89;
- HashResultPointer[2] = 0x98BADCFE;
- HashResultPointer[3] = 0x10325476;
- HashResultPointer[4] = 0xC3D2E1F0;
-}
-
-/************************************************************************/
-/* */
-/* lpfc_sha_iterate */
-/* */
-/************************************************************************/
-static void
-lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer)
-{
- int t;
- uint32_t TEMP;
- uint32_t A, B, C, D, E;
- t = 16;
- do {
- HashWorkingPointer[t] =
- S(1,
- HashWorkingPointer[t - 3] ^ HashWorkingPointer[t -
- 8] ^
- HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]);
- } while (++t <= 79);
- t = 0;
- A = HashResultPointer[0];
- B = HashResultPointer[1];
- C = HashResultPointer[2];
- D = HashResultPointer[3];
- E = HashResultPointer[4];
-
- do {
- if (t < 20) {
- TEMP = ((B & C) | ((~B) & D)) + 0x5A827999;
- } else if (t < 40) {
- TEMP = (B ^ C ^ D) + 0x6ED9EBA1;
- } else if (t < 60) {
- TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC;
- } else {
- TEMP = (B ^ C ^ D) + 0xCA62C1D6;
- }
- TEMP += S(5, A) + E + HashWorkingPointer[t];
- E = D;
- D = C;
- C = S(30, B);
- B = A;
- A = TEMP;
- } while (++t <= 79);
-
- HashResultPointer[0] += A;
- HashResultPointer[1] += B;
- HashResultPointer[2] += C;
- HashResultPointer[3] += D;
- HashResultPointer[4] += E;
-
-}
-
-/************************************************************************/
-/* */
-/* lpfc_challenge_key */
-/* */
-/************************************************************************/
-static void
-lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking)
-{
- *HashWorking = (*RandomChallenge ^ *HashWorking);
-}
-
-/************************************************************************/
-/* */
-/* lpfc_hba_init */
-/* */
-/************************************************************************/
-void
-lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit)
-{
- int t;
- uint32_t *HashWorking;
- uint32_t *pwwnn = (uint32_t *) phba->wwnn;
-
- HashWorking = kcalloc(80, sizeof(uint32_t), GFP_KERNEL);
- if (!HashWorking)
- return;
-
- HashWorking[0] = HashWorking[78] = *pwwnn++;
- HashWorking[1] = HashWorking[79] = *pwwnn;
-
- for (t = 0; t < 7; t++)
- lpfc_challenge_key(phba->RandomData + t, HashWorking + t);
-
- lpfc_sha_init(hbainit);
- lpfc_sha_iterate(hbainit, HashWorking);
- kfree(HashWorking);
-}
-
-void
-lpfc_cleanup(struct lpfc_vport *vport)
-{
- struct lpfc_hba *phba = vport->phba;
- struct lpfc_nodelist *ndlp, *next_ndlp;
- int i = 0;
-
- if (phba->link_state > LPFC_LINK_DOWN)
- lpfc_port_link_failure(vport);
-
- list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
- if (ndlp->nlp_type & NLP_FABRIC)
- lpfc_disc_state_machine(vport, ndlp, NULL,
- NLP_EVT_DEVICE_RECOVERY);
- lpfc_disc_state_machine(vport, ndlp, NULL,
- NLP_EVT_DEVICE_RM);
- }
-
- /* At this point, ALL ndlp's should be gone
- * because of the previous NLP_EVT_DEVICE_RM.
- * Lets wait for this to happen, if needed.
- */
- while (!list_empty(&vport->fc_nodes)) {
-
- if (i++ > 3000) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
- "0233 Nodelist not empty\n");
- break;
- }
-
- /* Wait for any activity on ndlps to settle */
- msleep(10);
- }
- return;
-}
-
-static void
-lpfc_establish_link_tmo(unsigned long ptr)
-{
- struct lpfc_hba *phba = (struct lpfc_hba *) ptr;
- struct lpfc_vport **vports;
- unsigned long iflag;
- int i;
-
- /* Re-establishing Link, timer expired */
- lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
- "1300 Re-establishing Link, timer expired "
- "Data: x%x x%x\n",
- phba->pport->fc_flag, phba->pport->port_state);
- vports = lpfc_create_vport_work_array(phba);
- if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
- struct Scsi_Host *shost;
- shost = lpfc_shost_from_vport(vports[i]);
- spin_lock_irqsave(shost->host_lock, iflag);
- vports[i]->fc_flag &= ~FC_ESTABLISH_LINK;
- spin_unlock_irqrestore(shost->host_lock, iflag);
- }
- lpfc_destroy_vport_work_array(phba, vports);
-}
-
-void
-lpfc_stop_vport_timers(struct lpfc_vport *vport)
-{
- del_timer_sync(&vport->els_tmofunc);
- del_timer_sync(&vport->fc_fdmitmo);
- lpfc_can_disctmo(vport);
- return;
-}
-
-static void
-lpfc_stop_phba_timers(struct lpfc_hba *phba)
-{
- del_timer_sync(&phba->fcp_poll_timer);
- del_timer_sync(&phba->fc_estabtmo);
- lpfc_stop_vport_timers(phba->pport);
- del_timer_sync(&phba->sli.mbox_tmo);
- del_timer_sync(&phba->fabric_block_timer);
- phba->hb_outstanding = 0;
- del_timer_sync(&phba->hb_tmofunc);
- return;
-}
-
-static void
-lpfc_block_mgmt_io(struct lpfc_hba * phba)
-{
- unsigned long iflag;
-
- spin_lock_irqsave(&phba->hbalock, iflag);
- phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
- spin_unlock_irqrestore(&phba->hbalock, iflag);
-}
-
-int
-lpfc_online(struct lpfc_hba *phba)
-{
- struct lpfc_vport *vport = phba->pport;
- struct lpfc_vport **vports;
- int i;
-
- if (!phba)
- return 0;
-
- if (!(vport->fc_flag & FC_OFFLINE_MODE))
- return 0;
-
- lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "0458 Bring Adapter online\n");
-
- lpfc_block_mgmt_io(phba);
-
- if (!lpfc_sli_queue_setup(phba)) {
- lpfc_unblock_mgmt_io(phba);
- return 1;
- }
-
- if (lpfc_sli_hba_setup(phba)) { /* Initialize the HBA */
- lpfc_unblock_mgmt_io(phba);
- return 1;
- }
-
- vports = lpfc_create_vport_work_array(phba);
- if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
- struct Scsi_Host *shost;
- shost = lpfc_shost_from_vport(vports[i]);
- spin_lock_irq(shost->host_lock);
- vports[i]->fc_flag &= ~FC_OFFLINE_MODE;
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
- vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
- spin_unlock_irq(shost->host_lock);
- }
- lpfc_destroy_vport_work_array(phba, vports);
-
- lpfc_unblock_mgmt_io(phba);
- return 0;
-}
-
-void
-lpfc_unblock_mgmt_io(struct lpfc_hba * phba)
-{
- unsigned long iflag;
-
- spin_lock_irqsave(&phba->hbalock, iflag);
- phba->sli.sli_flag &= ~LPFC_BLOCK_MGMT_IO;
- spin_unlock_irqrestore(&phba->hbalock, iflag);
-}
-
-void
-lpfc_offline_prep(struct lpfc_hba * phba)
-{
- struct lpfc_vport *vport = phba->pport;
- struct lpfc_nodelist *ndlp, *next_ndlp;
- struct lpfc_vport **vports;
- int i;
-
- if (vport->fc_flag & FC_OFFLINE_MODE)
- return;
-
- lpfc_block_mgmt_io(phba);
-
- lpfc_linkdown(phba);
-
- /* Issue an unreg_login to all nodes on all vports */
- vports = lpfc_create_vport_work_array(phba);
- if (vports != NULL) {
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
- struct Scsi_Host *shost;
-
- if (vports[i]->load_flag & FC_UNLOADING)
- continue;
- shost = lpfc_shost_from_vport(vports[i]);
- list_for_each_entry_safe(ndlp, next_ndlp,
- &vports[i]->fc_nodes,
- nlp_listp) {
- if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
- continue;
- if (ndlp->nlp_type & NLP_FABRIC) {
- lpfc_disc_state_machine(vports[i], ndlp,
- NULL, NLP_EVT_DEVICE_RECOVERY);
- lpfc_disc_state_machine(vports[i], ndlp,
- NULL, NLP_EVT_DEVICE_RM);
- }
- spin_lock_irq(shost->host_lock);
- ndlp->nlp_flag &= ~NLP_NPR_ADISC;
- spin_unlock_irq(shost->host_lock);
- lpfc_unreg_rpi(vports[i], ndlp);
- }
- }
- }
- lpfc_destroy_vport_work_array(phba, vports);
-
- lpfc_sli_flush_mbox_queue(phba);
-}
-
-void
-lpfc_offline(struct lpfc_hba *phba)
-{
- struct Scsi_Host *shost;
- struct lpfc_vport **vports;
- int i;
-
- if (phba->pport->fc_flag & FC_OFFLINE_MODE)
- return;
-
- /* stop all timers associated with this hba */
- lpfc_stop_phba_timers(phba);
- vports = lpfc_create_vport_work_array(phba);
- if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
- lpfc_stop_vport_timers(vports[i]);
- lpfc_destroy_vport_work_array(phba, vports);
- lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "0460 Bring Adapter offline\n");
- /* Bring down the SLI Layer and cleanup. The HBA is offline
- now. */
- lpfc_sli_hba_down(phba);
- spin_lock_irq(&phba->hbalock);
- phba->work_ha = 0;
- spin_unlock_irq(&phba->hbalock);
- vports = lpfc_create_vport_work_array(phba);
- if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
- shost = lpfc_shost_from_vport(vports[i]);
- spin_lock_irq(shost->host_lock);
- vports[i]->work_port_events = 0;
- vports[i]->fc_flag |= FC_OFFLINE_MODE;
- spin_unlock_irq(shost->host_lock);
- }
- lpfc_destroy_vport_work_array(phba, vports);
-}
-
-/******************************************************************************
-* Function name: lpfc_scsi_free
-*
-* Description: Called from lpfc_pci_remove_one free internal driver resources
-*
-******************************************************************************/
-static int
-lpfc_scsi_free(struct lpfc_hba *phba)
-{
- struct lpfc_scsi_buf *sb, *sb_next;
- struct lpfc_iocbq *io, *io_next;
-
- spin_lock_irq(&phba->hbalock);
- /* Release all the lpfc_scsi_bufs maintained by this host. */
- list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
- list_del(&sb->list);
- pci_pool_free(phba->lpfc_scsi_dma_buf_pool, sb->data,
- sb->dma_handle);
- kfree(sb);
- phba->total_scsi_bufs--;
- }
-
- /* Release all the lpfc_iocbq entries maintained by this host. */
- list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) {
- list_del(&io->list);
- kfree(io);
- phba->total_iocbq_bufs--;
- }
-
- spin_unlock_irq(&phba->hbalock);
-
- return 0;
-}
-
-struct lpfc_vport *
-lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
-{
- struct lpfc_vport *vport;
- struct Scsi_Host *shost;
- int error = 0;
-
- if (dev != &phba->pcidev->dev)
- shost = scsi_host_alloc(&lpfc_vport_template,
- sizeof(struct lpfc_vport));
- else
- shost = scsi_host_alloc(&lpfc_template,
- sizeof(struct lpfc_vport));
- if (!shost)
- goto out;
-
- vport = (struct lpfc_vport *) shost->hostdata;
- vport->phba = phba;
-
- vport->load_flag |= FC_LOADING;
- vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
-
- lpfc_get_vport_cfgparam(vport);
- shost->unique_id = instance;
- shost->max_id = LPFC_MAX_TARGET;
- shost->max_lun = vport->cfg_max_luns;
- shost->this_id = -1;
- shost->max_cmd_len = 16;
- /*
- * Set initial can_queue value since 0 is no longer supported and
- * scsi_add_host will fail. This will be adjusted later based on the
- * max xri value determined in hba setup.
- */
- shost->can_queue = phba->cfg_hba_queue_depth - 10;
- if (dev != &phba->pcidev->dev) {
- shost->transportt = lpfc_vport_transport_template;
- vport->port_type = LPFC_NPIV_PORT;
- } else {
- shost->transportt = lpfc_transport_template;
- vport->port_type = LPFC_PHYSICAL_PORT;
- }
-
- /* Initialize all internally managed lists. */
- INIT_LIST_HEAD(&vport->fc_nodes);
- spin_lock_init(&vport->work_port_lock);
-
- init_timer(&vport->fc_disctmo);
- vport->fc_disctmo.function = lpfc_disc_timeout;
- vport->fc_disctmo.data = (unsigned long)vport;
-
- init_timer(&vport->fc_fdmitmo);
- vport->fc_fdmitmo.function = lpfc_fdmi_tmo;
- vport->fc_fdmitmo.data = (unsigned long)vport;
-
- init_timer(&vport->els_tmofunc);
- vport->els_tmofunc.function = lpfc_els_timeout;
- vport->els_tmofunc.data = (unsigned long)vport;
-
- error = scsi_add_host(shost, dev);
- if (error)
- goto out_put_shost;
-
- spin_lock_irq(&phba->hbalock);
- list_add_tail(&vport->listentry, &phba->port_list);
- spin_unlock_irq(&phba->hbalock);
- return vport;
-
-out_put_shost:
- scsi_host_put(shost);
-out:
- return NULL;
-}
-
-void
-destroy_port(struct lpfc_vport *vport)
-{
- struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
- struct lpfc_hba *phba = vport->phba;
-
- kfree(vport->vname);
-
- lpfc_debugfs_terminate(vport);
- fc_remove_host(shost);
- scsi_remove_host(shost);
-
- spin_lock_irq(&phba->hbalock);
- list_del_init(&vport->listentry);
- spin_unlock_irq(&phba->hbalock);
-
- lpfc_cleanup(vport);
- return;
-}
-
-int
-lpfc_get_instance(void)
-{
- int instance = 0;
-
- /* Assign an unused number */
- if (!idr_pre_get(&lpfc_hba_index, GFP_KERNEL))
- return -1;
- if (idr_get_new(&lpfc_hba_index, NULL, &instance))
- return -1;
- return instance;
-}
-
-/*
- * Note: there is no scan_start function as adapter initialization
- * will have asynchronously kicked off the link initialization.
- */
-
-int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
-{
- struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
- struct lpfc_hba *phba = vport->phba;
- int stat = 0;
-
- spin_lock_irq(shost->host_lock);
-
- if (vport->load_flag & FC_UNLOADING) {
- stat = 1;
- goto finished;
- }
- if (time >= 30 * HZ) {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0461 Scanning longer than 30 "
- "seconds. Continuing initialization\n");
- stat = 1;
- goto finished;
- }
- if (time >= 15 * HZ && phba->link_state <= LPFC_LINK_DOWN) {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0465 Link down longer than 15 "
- "seconds. Continuing initialization\n");
- stat = 1;
- goto finished;
- }
-
- if (vport->port_state != LPFC_VPORT_READY)
- goto finished;
- if (vport->num_disc_nodes || vport->fc_prli_sent)
- goto finished;
- if (vport->fc_map_cnt == 0 && time < 2 * HZ)
- goto finished;
- if ((phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) != 0)
- goto finished;
-
- stat = 1;
-
-finished:
- spin_unlock_irq(shost->host_lock);
- return stat;
-}
-
-void lpfc_host_attrib_init(struct Scsi_Host *shost)
-{
- struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
- struct lpfc_hba *phba = vport->phba;
- /*
- * Set fixed host attributes. Must done after lpfc_sli_hba_setup().
- */
-
- fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
- fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
- fc_host_supported_classes(shost) = FC_COS_CLASS3;
-
- memset(fc_host_supported_fc4s(shost), 0,
- sizeof(fc_host_supported_fc4s(shost)));
- fc_host_supported_fc4s(shost)[2] = 1;
- fc_host_supported_fc4s(shost)[7] = 1;
-
- lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost),
- sizeof fc_host_symbolic_name(shost));
-
- fc_host_supported_speeds(shost) = 0;
- if (phba->lmt & LMT_10Gb)
- fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
- if (phba->lmt & LMT_8Gb)
- fc_host_supported_speeds(shost) |= FC_PORTSPEED_8GBIT;
- if (phba->lmt & LMT_4Gb)
- fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT;
- if (phba->lmt & LMT_2Gb)
- fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT;
- if (phba->lmt & LMT_1Gb)
- fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT;
-
- fc_host_maxframe_size(shost) =
- (((uint32_t) vport->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
- (uint32_t) vport->fc_sparam.cmn.bbRcvSizeLsb;
-
- /* This value is also unchanging */
- memset(fc_host_active_fc4s(shost), 0,
- sizeof(fc_host_active_fc4s(shost)));
- fc_host_active_fc4s(shost)[2] = 1;
- fc_host_active_fc4s(shost)[7] = 1;
-
- fc_host_max_npiv_vports(shost) = phba->max_vpi;
- spin_lock_irq(shost->host_lock);
- vport->load_flag &= ~FC_LOADING;
- spin_unlock_irq(shost->host_lock);
-}
-
-static int __devinit
-lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
-{
- struct lpfc_vport *vport = NULL;
- struct lpfc_hba *phba;
- struct lpfc_sli *psli;
- struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
- struct Scsi_Host *shost = NULL;
- void *ptr;
- unsigned long bar0map_len, bar2map_len;
- int error = -ENODEV, retval;
- int i, hbq_count;
- uint16_t iotag;
-
- if (pci_enable_device(pdev))
- goto out;
- if (pci_request_regions(pdev, LPFC_DRIVER_NAME))
- goto out_disable_device;
-
- phba = kzalloc(sizeof (struct lpfc_hba), GFP_KERNEL);
- if (!phba)
- goto out_release_regions;
-
- spin_lock_init(&phba->hbalock);
-
- phba->pcidev = pdev;
-
- /* Assign an unused board number */
- if ((phba->brd_no = lpfc_get_instance()) < 0)
- goto out_free_phba;
-
- INIT_LIST_HEAD(&phba->port_list);
- /*
- * Get all the module params for configuring this host and then
- * establish the host.
- */
- lpfc_get_cfgparam(phba);
- phba->max_vpi = LPFC_MAX_VPI;
-
- /* Initialize timers used by driver */
- init_timer(&phba->fc_estabtmo);
- phba->fc_estabtmo.function = lpfc_establish_link_tmo;
- phba->fc_estabtmo.data = (unsigned long)phba;
-
- init_timer(&phba->hb_tmofunc);
- phba->hb_tmofunc.function = lpfc_hb_timeout;
- phba->hb_tmofunc.data = (unsigned long)phba;
-
- psli = &phba->sli;
- init_timer(&psli->mbox_tmo);
- psli->mbox_tmo.function = lpfc_mbox_timeout;
- psli->mbox_tmo.data = (unsigned long) phba;
- init_timer(&phba->fcp_poll_timer);
- phba->fcp_poll_timer.function = lpfc_poll_timeout;
- phba->fcp_poll_timer.data = (unsigned long) phba;
- init_timer(&phba->fabric_block_timer);
- phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
- phba->fabric_block_timer.data = (unsigned long) phba;
-
- pci_set_master(pdev);
- pci_try_set_mwi(pdev);
-
- if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0)
- if (pci_set_dma_mask(phba->pcidev, DMA_32BIT_MASK) != 0)
- goto out_idr_remove;
-
- /*
- * Get the bus address of Bar0 and Bar2 and the number of bytes
- * required by each mapping.
- */
- phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0);
- bar0map_len = pci_resource_len(phba->pcidev, 0);
-
- phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2);
- bar2map_len = pci_resource_len(phba->pcidev, 2);
-
- /* Map HBA SLIM to a kernel virtual address. */
- phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
- if (!phba->slim_memmap_p) {
- error = -ENODEV;
- dev_printk(KERN_ERR, &pdev->dev,
- "ioremap failed for SLIM memory.\n");
- goto out_idr_remove;
- }
-
- /* Map HBA Control Registers to a kernel virtual address. */
- phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
- if (!phba->ctrl_regs_memmap_p) {
- error = -ENODEV;
- dev_printk(KERN_ERR, &pdev->dev,
- "ioremap failed for HBA control registers.\n");
- goto out_iounmap_slim;
- }
-
- /* Allocate memory for SLI-2 structures */
- phba->slim2p = dma_alloc_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE,
- &phba->slim2p_mapping, GFP_KERNEL);
- if (!phba->slim2p)
- goto out_iounmap;
-
- memset(phba->slim2p, 0, SLI2_SLIM_SIZE);
-
- phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev,
- lpfc_sli_hbq_size(),
- &phba->hbqslimp.phys,
- GFP_KERNEL);
- if (!phba->hbqslimp.virt)
- goto out_free_slim;
-
- hbq_count = lpfc_sli_hbq_count();
- ptr = phba->hbqslimp.virt;
- for (i = 0; i < hbq_count; ++i) {
- phba->hbqs[i].hbq_virt = ptr;
- INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
- ptr += (lpfc_hbq_defs[i]->entry_count *
- sizeof(struct lpfc_hbq_entry));
- }
- phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
- phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
-
- memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
-
- /* Initialize the SLI Layer to run with lpfc HBAs. */
- lpfc_sli_setup(phba);
- lpfc_sli_queue_setup(phba);
-
- retval = lpfc_mem_alloc(phba);
- if (retval) {
- error = retval;
- goto out_free_hbqslimp;
- }
-
- /* Initialize and populate the iocb list per host. */
- INIT_LIST_HEAD(&phba->lpfc_iocb_list);
- for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) {
- iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
- if (iocbq_entry == NULL) {
- printk(KERN_ERR "%s: only allocated %d iocbs of "
- "expected %d count. Unloading driver.\n",
- __FUNCTION__, i, LPFC_IOCB_LIST_CNT);
- error = -ENOMEM;
- goto out_free_iocbq;
- }
-
- iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
- if (iotag == 0) {
- kfree (iocbq_entry);
- printk(KERN_ERR "%s: failed to allocate IOTAG. "
- "Unloading driver.\n",
- __FUNCTION__);
- error = -ENOMEM;
- goto out_free_iocbq;
- }
-
- spin_lock_irq(&phba->hbalock);
- list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
- phba->total_iocbq_bufs++;
- spin_unlock_irq(&phba->hbalock);
- }
-
- /* Initialize HBA structure */
- phba->fc_edtov = FF_DEF_EDTOV;
- phba->fc_ratov = FF_DEF_RATOV;
- phba->fc_altov = FF_DEF_ALTOV;
- phba->fc_arbtov = FF_DEF_ARBTOV;
-
- INIT_LIST_HEAD(&phba->work_list);
- phba->work_ha_mask = (HA_ERATT|HA_MBATT|HA_LATT);
- phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
-
- /* Startup the kernel thread for this host adapter. */
- phba->worker_thread = kthread_run(lpfc_do_work, phba,
- "lpfc_worker_%d", phba->brd_no);
- if (IS_ERR(phba->worker_thread)) {
- error = PTR_ERR(phba->worker_thread);
- goto out_free_iocbq;
- }
-
- /* Initialize the list of scsi buffers used by driver for scsi IO. */
- spin_lock_init(&phba->scsi_buf_list_lock);
- INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
-
- /* Initialize list of fabric iocbs */
- INIT_LIST_HEAD(&phba->fabric_iocb_list);
-
- /* Initialize list to save ELS buffers */
- INIT_LIST_HEAD(&phba->elsbuf);
-
- vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
- if (!vport)
- goto out_kthread_stop;
-
- shost = lpfc_shost_from_vport(vport);
- phba->pport = vport;
- lpfc_debugfs_initialize(vport);
-
- pci_set_drvdata(pdev, shost);
-
- if (phba->cfg_use_msi) {
- retval = pci_enable_msi(phba->pcidev);
- if (!retval)
- phba->using_msi = 1;
- else
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0452 Enable MSI failed, continuing "
- "with IRQ\n");
- }
-
- retval = request_irq(phba->pcidev->irq, lpfc_intr_handler, IRQF_SHARED,
- LPFC_DRIVER_NAME, phba);
- if (retval) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0451 Enable interrupt handler failed\n");
- error = retval;
- goto out_disable_msi;
- }
-
- phba->MBslimaddr = phba->slim_memmap_p;
- phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
- phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
- phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
- phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
-
- if (lpfc_alloc_sysfs_attr(vport)) {
- error = -ENOMEM;
- goto out_free_irq;
- }
-
- if (lpfc_sli_hba_setup(phba)) {
- error = -ENODEV;
- goto out_remove_device;
- }
-
- /*
- * hba setup may have changed the hba_queue_depth so we need to adjust
- * the value of can_queue.
- */
- shost->can_queue = phba->cfg_hba_queue_depth - 10;
-
- lpfc_host_attrib_init(shost);
-
- if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
- spin_lock_irq(shost->host_lock);
- lpfc_poll_start_timer(phba);
- spin_unlock_irq(shost->host_lock);
- }
-
- scsi_scan_host(shost);
-
- return 0;
-
-out_remove_device:
- lpfc_free_sysfs_attr(vport);
- spin_lock_irq(shost->host_lock);
- vport->load_flag |= FC_UNLOADING;
- spin_unlock_irq(shost->host_lock);
-out_free_irq:
- lpfc_stop_phba_timers(phba);
- phba->pport->work_port_events = 0;
- free_irq(phba->pcidev->irq, phba);
-out_disable_msi:
- if (phba->using_msi)
- pci_disable_msi(phba->pcidev);
- destroy_port(vport);
-out_kthread_stop:
- kthread_stop(phba->worker_thread);
-out_free_iocbq:
- list_for_each_entry_safe(iocbq_entry, iocbq_next,
- &phba->lpfc_iocb_list, list) {
- kfree(iocbq_entry);
- phba->total_iocbq_bufs--;
- }
- lpfc_mem_free(phba);
-out_free_hbqslimp:
- dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt,
- phba->hbqslimp.phys);
-out_free_slim:
- dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, phba->slim2p,
- phba->slim2p_mapping);
-out_iounmap:
- iounmap(phba->ctrl_regs_memmap_p);
-out_iounmap_slim:
- iounmap(phba->slim_memmap_p);
-out_idr_remove:
- idr_remove(&lpfc_hba_index, phba->brd_no);
-out_free_phba:
- kfree(phba);
-out_release_regions:
- pci_release_regions(pdev);
-out_disable_device:
- pci_disable_device(pdev);
-out:
- pci_set_drvdata(pdev, NULL);
- if (shost)
- scsi_host_put(shost);
- return error;
-}
-
-static void __devexit
-lpfc_pci_remove_one(struct pci_dev *pdev)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
- struct lpfc_hba *phba = vport->phba;
- spin_lock_irq(&phba->hbalock);
- vport->load_flag |= FC_UNLOADING;
- spin_unlock_irq(&phba->hbalock);
-
- kfree(vport->vname);
- lpfc_free_sysfs_attr(vport);
-
- kthread_stop(phba->worker_thread);
-
- fc_remove_host(shost);
- scsi_remove_host(shost);
- lpfc_cleanup(vport);
-
- /*
- * Bring down the SLI Layer. This step disable all interrupts,
- * clears the rings, discards all mailbox commands, and resets
- * the HBA.
- */
- lpfc_sli_hba_down(phba);
- lpfc_sli_brdrestart(phba);
-
- lpfc_stop_phba_timers(phba);
- spin_lock_irq(&phba->hbalock);
- list_del_init(&vport->listentry);
- spin_unlock_irq(&phba->hbalock);
-
- lpfc_debugfs_terminate(vport);
-
- /* Release the irq reservation */
- free_irq(phba->pcidev->irq, phba);
- if (phba->using_msi)
- pci_disable_msi(phba->pcidev);
-
- pci_set_drvdata(pdev, NULL);
- scsi_host_put(shost);
-
- /*
- * Call scsi_free before mem_free since scsi bufs are released to their
- * corresponding pools here.
- */
- lpfc_scsi_free(phba);
- lpfc_mem_free(phba);
-
- dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt,
- phba->hbqslimp.phys);
-
- /* Free resources associated with SLI2 interface */
- dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
- phba->slim2p, phba->slim2p_mapping);
-
- /* unmap adapter SLIM and Control Registers */
- iounmap(phba->ctrl_regs_memmap_p);
- iounmap(phba->slim_memmap_p);
-
- idr_remove(&lpfc_hba_index, phba->brd_no);
-
- kfree(phba);
-
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-
-/**
- * lpfc_io_error_detected - called when PCI error is detected
- * @pdev: Pointer to PCI device
- * @state: The current pci conneection state
- *
- * This function is called after a PCI bus error affecting
- * this device has been detected.
- */
-static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
-
- if (state == pci_channel_io_perm_failure)
- return PCI_ERS_RESULT_DISCONNECT;
-
- pci_disable_device(pdev);
- /*
- * There may be I/Os dropped by the firmware.
- * Error iocb (I/O) on txcmplq and let the SCSI layer
- * retry it after re-establishing link.
- */
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
-
- /* Release the irq reservation */
- free_irq(phba->pcidev->irq, phba);
- if (phba->using_msi)
- pci_disable_msi(phba->pcidev);
-
- /* Request a slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * lpfc_io_slot_reset - called after the pci bus has been reset.
- * @pdev: Pointer to PCI device
- *
- * Restart the card from scratch, as if from a cold-boot.
- */
-static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
- struct lpfc_sli *psli = &phba->sli;
- int bars = pci_select_bars(pdev, IORESOURCE_MEM);
-
- dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
- if (pci_enable_device_bars(pdev, bars)) {
- printk(KERN_ERR "lpfc: Cannot re-enable "
- "PCI device after reset.\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
- pci_set_master(pdev);
-
- /* Re-establishing Link */
- spin_lock_irq(shost->host_lock);
- phba->pport->fc_flag |= FC_ESTABLISH_LINK;
- spin_unlock_irq(shost->host_lock);
-
- spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
- spin_unlock_irq(&phba->hbalock);
-
-
- /* Take device offline; this will perform cleanup */
- lpfc_offline(phba);
- lpfc_sli_brdrestart(phba);
-
- return PCI_ERS_RESULT_RECOVERED;
-}
-
-/**
- * lpfc_io_resume - called when traffic can start flowing again.
- * @pdev: Pointer to PCI device
- *
- * This callback is called when the error recovery driver tells us that
- * its OK to resume normal operation.
- */
-static void lpfc_io_resume(struct pci_dev *pdev)
-{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
-
- if (lpfc_online(phba) == 0) {
- mod_timer(&phba->fc_estabtmo, jiffies + HZ * 60);
- }
-}
-
-static struct pci_device_id lpfc_id_table[] = {
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FIREFLY,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_THOR,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PEGASUS,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_CENTAUR,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_DRAGONFLY,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SUPERFLY,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_RFLY,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PFLY,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_SCSP,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_DCSP,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_SCSP,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_DCSP,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BMID,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BSMB,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZMID,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZSMB,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_TFLY,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP101,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP10000S,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP11000S,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LPE11000S,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_MID,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_SMB,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_DCSP,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_SCSP,
- PCI_ANY_ID, PCI_ANY_ID, },
- {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_S,
- PCI_ANY_ID, PCI_ANY_ID, },
- { 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, lpfc_id_table);
-
-static struct pci_error_handlers lpfc_err_handler = {
- .error_detected = lpfc_io_error_detected,
- .slot_reset = lpfc_io_slot_reset,
- .resume = lpfc_io_resume,
-};
-
-static struct pci_driver lpfc_driver = {
- .name = LPFC_DRIVER_NAME,
- .id_table = lpfc_id_table,
- .probe = lpfc_pci_probe_one,
- .remove = __devexit_p(lpfc_pci_remove_one),
- .err_handler = &lpfc_err_handler,
-};
-
-static int __init
-lpfc_init(void)
-{
- int error = 0;
-
- printk(LPFC_MODULE_DESC "\n");
- printk(LPFC_COPYRIGHT "\n");
-
- if (lpfc_enable_npiv) {
- lpfc_transport_functions.vport_create = lpfc_vport_create;
- lpfc_transport_functions.vport_delete = lpfc_vport_delete;
- }
- lpfc_transport_template =
- fc_attach_transport(&lpfc_transport_functions);
- if (lpfc_transport_template == NULL)
- return -ENOMEM;
- if (lpfc_enable_npiv) {
- lpfc_vport_transport_template =
- fc_attach_transport(&lpfc_vport_transport_functions);
- if (lpfc_vport_transport_template == NULL) {
- fc_release_transport(lpfc_transport_template);
- return -ENOMEM;
- }
- }
- error = pci_register_driver(&lpfc_driver);
- if (error) {
- fc_release_transport(lpfc_transport_template);
- fc_release_transport(lpfc_vport_transport_template);
- }
-
- return error;
-}
-
-static void __exit
-lpfc_exit(void)
-{
- pci_unregister_driver(&lpfc_driver);
- fc_release_transport(lpfc_transport_template);
- if (lpfc_enable_npiv)
- fc_release_transport(lpfc_vport_transport_template);
-}
-
-module_init(lpfc_init);
-module_exit(lpfc_exit);
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION(LPFC_MODULE_DESC);
-MODULE_AUTHOR("Emulex Corporation - tech.support@xxxxxxxxxx");
-MODULE_VERSION("0:" LPFC_DRIVER_VERSION);
diff -upNr a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
--- a/drivers/scsi/lpfc/lpfc_scsi.c 2008-01-11 01:04:08.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_scsi.c 2008-01-11 01:23:43.000000000 -0500
@@ -1463,7 +1463,7 @@ struct scsi_host_template lpfc_template
.slave_destroy = lpfc_slave_destroy,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
- .sg_tablesize = LPFC_SG_SEG_CNT,
+ .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
.use_sg_chaining = ENABLE_SG_CHAINING,
.cmd_per_lun = LPFC_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
@@ -1484,7 +1484,7 @@ struct scsi_host_template lpfc_vport_tem
.slave_destroy = lpfc_slave_destroy,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
- .sg_tablesize = LPFC_SG_SEG_CNT,
+ .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
.cmd_per_lun = LPFC_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.use_sg_chaining = ENABLE_SG_CHAINING,
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
