Add parameters to enable and disable heartbeat and hba resets
Signed-off-by: James Smart <James.Smart@xxxxxxxxxx>
diff -upNr a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
--- a/drivers/scsi/lpfc/lpfc_attr.c 2007-11-09 15:54:47.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_attr.c 2008-01-11 00:53:19.000000000 -0500
@@ -342,6 +342,9 @@ lpfc_selective_reset(struct lpfc_hba *ph
struct completion online_compl;
int status = 0;
+ if (!phba->cfg_enable_hba_reset)
+ return -EIO;
+
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
if (status != 0)
@@ -415,6 +418,8 @@ lpfc_board_mode_store(struct class_devic
struct completion online_compl;
int status=0;
+ if (!phba->cfg_enable_hba_reset)
+ return -EACCES;
init_completion(&online_compl);
if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
@@ -979,6 +984,8 @@ lpfc_soft_wwpn_store(struct class_device
unsigned int i, j, cnt=count;
u8 wwpn[8];
+ if (!phba->cfg_enable_hba_reset)
+ return -EACCES;
spin_lock_irq(&phba->hbalock);
if (phba->over_temp_state == HBA_OVER_TEMP) {
spin_unlock_irq(&phba->hbalock);
@@ -1506,7 +1513,21 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
*/
LPFC_ATTR_R(use_msi, 0, 0, 1, "Use Message Signaled Interrupts, if possible");
+/*
+# lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
+# 0 = HBA resets disabled
+# 1 = HBA resets enabled (default)
+# Value range is [0,1]. Default value is 1.
+*/
+LPFC_ATTR_R(enable_hba_reset, 1, 0, 1, "Enable HBA resets from the driver.");
+/*
+# lpfc_enable_hba_heartbeat: Enable HBA heartbeat timer..
+# 0 = HBA Heartbeat disabled
+# 1 = HBA Heartbeat enabled (default)
+# Value range is [0,1]. Default value is 1.
+*/
+LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat.");
struct class_device_attribute *lpfc_hba_attrs[] = {
&class_device_attr_info,
@@ -1558,6 +1579,8 @@ struct class_device_attribute *lpfc_hba_
&class_device_attr_lpfc_soft_wwnn,
&class_device_attr_lpfc_soft_wwpn,
&class_device_attr_lpfc_soft_wwn_enable,
+ &class_device_attr_lpfc_enable_hba_reset,
+ &class_device_attr_lpfc_enable_hba_heartbeat,
NULL,
};
@@ -2448,6 +2471,8 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
lpfc_use_msi_init(phba, lpfc_use_msi);
+ lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
+ lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
phba->cfg_poll = lpfc_poll;
phba->cfg_soft_wwnn = 0L;
phba->cfg_soft_wwpn = 0L;
diff -upNr a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
--- a/drivers/scsi/lpfc/lpfc.h 2008-01-11 00:51:34.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc.h 2008-01-11 00:53:19.000000000 -0500
@@ -471,7 +471,8 @@ struct lpfc_hba {
uint64_t cfg_soft_wwnn;
uint64_t cfg_soft_wwpn;
uint32_t cfg_hba_queue_depth;
-
+ uint32_t cfg_enable_hba_reset;
+ uint32_t cfg_enable_hba_heartbeat;
lpfc_vpd_t vpd; /* vital product data */
diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c 2008-01-11 00:51:34.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_init.c 2008-01-11 00:53:19.000000000 -0500
@@ -594,49 +594,50 @@ lpfc_hb_timeout_handler(struct lpfc_hba
}
phba->elsbuf_prev_cnt = phba->elsbuf_cnt;
-
/* If there is no heart beat outstanding, issue a heartbeat command */
- if (!phba->hb_outstanding) {
- pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
- if (!pmboxq) {
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
- return;
- }
-
- lpfc_heart_beat(phba, pmboxq);
- pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
- pmboxq->vport = phba->pport;
- retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
+ if (phba->cfg_enable_hba_heartbeat) {
+ if (!phba->hb_outstanding) {
+ pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
+ if (!pmboxq) {
+ mod_timer(&phba->hb_tmofunc,
+ jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+ return;
+ }
- if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
- mempool_free(pmboxq, phba->mbox_mem_pool);
+ lpfc_heart_beat(phba, pmboxq);
+ pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
+ pmboxq->vport = phba->pport;
+ retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
+
+ if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+ mod_timer(&phba->hb_tmofunc,
+ jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+ return;
+ }
mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+ jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
+ phba->hb_outstanding = 1;
return;
- }
- mod_timer(&phba->hb_tmofunc,
- jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
- phba->hb_outstanding = 1;
- return;
- } else {
- /*
- * If heart beat timeout called with hb_outstanding set we
- * need to take the HBA offline.
- */
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0459 Adapter heartbeat failure, taking "
- "this port offline.\n");
-
- spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
- spin_unlock_irq(&phba->hbalock);
+ } else {
+ /*
+ * If heart beat timeout called with hb_outstanding set
+ * we need to take the HBA offline.
+ */
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0459 Adapter heartbeat failure, "
+ "taking this port offline.\n");
+
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
- lpfc_offline_prep(phba);
- lpfc_offline(phba);
- lpfc_unblock_mgmt_io(phba);
- phba->link_state = LPFC_HBA_ERROR;
- lpfc_hba_down_post(phba);
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ lpfc_unblock_mgmt_io(phba);
+ phba->link_state = LPFC_HBA_ERROR;
+ lpfc_hba_down_post(phba);
+ }
}
}
@@ -665,6 +666,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
* since we cannot communicate with the pci card anyway. */
if (pci_channel_offline(phba->pcidev))
return;
+ /* If resets are disabled then leave the HBA alone and return */
+ if (!phba->cfg_enable_hba_reset)
+ return;
if (phba->work_hs & HS_FFER6 ||
phba->work_hs & HS_FFER5) {
diff -upNr a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
--- a/drivers/scsi/lpfc/lpfc_sli.c 2008-01-11 00:51:34.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_sli.c 2008-01-11 00:53:19.000000000 -0500
@@ -2559,6 +2559,11 @@ lpfc_mbox_timeout_handler(struct lpfc_hb
* lpfc_offline calls lpfc_sli_hba_down which will clean up
* on oustanding mailbox commands.
*/
+ /* If resets are disabled then set error state and return. */
+ if (!phba->cfg_enable_hba_reset) {
+ phba->link_state = LPFC_HBA_ERROR;
+ return;
+ }
lpfc_offline_prep(phba);
lpfc_offline(phba);
lpfc_sli_brdrestart(phba);
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
