James.Bottomley@xxxxxxxxxxxxxxxxxxxxx wrote on Thu, 10 Jan 2008 14:55 -0600: > On Thu, 2008-01-10 at 15:43 -0500, Pete Wyckoff wrote: > > fujita.tomonori@xxxxxxxxxxxxx wrote on Wed, 09 Jan 2008 09:11 +0900: > > > On Tue, 8 Jan 2008 17:09:18 -0500 > > > Pete Wyckoff <pw@xxxxxxx> wrote: > > > > I took another look at the compat approach, to see if it is feasible > > > > to keep the compat handling somewhere else, without the use of #ifdef > > > > CONFIG_COMPAT and size-comparison code inside bsg.c. I don't see how. > > > > The use of iovec is within a write operation on a char device. It's > > > > not amenable to a compat_sys_ or a .compat_ioctl approach. > > > > > > > > I'm partial to #1 because the use of architecture-independent fields > > > > matches the rest of struct sg_io_v4. But if you don't want to have > > > > another iovec type in the kernel, could we do #2 but just return > > > > -EINVAL if the need for compat is detected? I.e. change > > > > dout_iovec_count to dout_iovec_length and do the math? > > > > > > If you are ok with removing the write/read interface and just have > > > ioctl, we could can handle comapt stuff like others do. But I think > > > that you (OSD people) really want to keep the write/read > > > interface. Sorry, I think that there is no workaround to support iovec > > > in bsg. > > > > I don't care about read/write in particular. But we do need some > > way to launch asynchronous SCSI commands, and currently read/write > > are the only way to do that in bsg. The reason is to keep multiple > > spindles busy at the same time. > > Won't multi-threading the ioctl calls achieve the same effect? Or do > you trip over BKL there? There's no BKL on (new) ioctls anymore, at least. A thread per device would be feasible perhaps. But if you want any sort of pipelining out of the device, esp. in the remote iSCSI case, you need to have a good number of commands outstanding to each device. So a thread per command per device. Typical iSCSI queue depth of 128 times 16 devices for a small setup is a lot of threads. The pthread/pipe latency overhead is not insignificant for fast storage networks too. > > How about these new ioctls instead of read/write: > > > > SG_IO_SUBMIT - start a new blk_execute_rq_nowait() > > SG_IO_TEST - complete and return a previous req > > SG_IO_WAIT - wait for a req to finish, interruptibly > > > > Then old write users will instead do ioctl SUBMIT. Read users will > > do TEST for non-blocking fd, or WAIT for blocking. And SG_IO could > > be implemented as SUBMIT + WAIT. > > > > Then we can do compat_ioctl and convert up iovecs out-of-line before > > calling the normal functions. > > > > Let me know if you want a patch for this. > > Really, the thought of re-inventing yet another async I/O interface > isn't very appealing. I'm fine with read/write, except Tomo is against handling iovecs because of the compat complexity with struct iovec being different on 32- vs 64-bit. There is a standard way to do "compat" ioctl that hides this handling in a different file (not bsg.c), which is the only reason I'm even considering these ioctls. I don't care about compat setups per se. Is there another async I/O mechanism? Userspace builds the CDBs, just needs some way to drop them in SCSI ML. BSG is almost perfect for this, but doesn't do iovec, leading to lots of memcpy. -- Pete - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
