John> Just fired up 2.6.24-rc5-mm1 on a Dual CPU PIII 550mhz system John> with 2gb of RAM. Got the following error. Let me know if you John> need more details or want me to run tests or make changes. John> Looks like something in the SCSI st driver, which makes sense John> since I have a pair of DLT 7k drives hooked upto this system via John> a Symbios PCI card. I've also got a P1000 jukebox on there as John> well. John> [ 354.338667] kernel BUG at include/linux/scatterlist.h:59! John> [ 354.403311] invalid opcode: 0000 [#1] SMP John> [ 354.452774] last sysfs file: John> /sys/devices/pci0000:00/0000:00:0d.1/host3/target3:0:3/3:0:3:0/vendor John> [ 354.560099] Modules linked in: John> [ 354.596859] John> [ 354.614753] Pid: 1795, comm: stinit Not tainted (2.6.24-rc5-mm1 #3) John> [ 354.689825] EIP: 0060:[<c0356bd0>] EFLAGS: 00010213 CPU: 0 John> [ 354.755538] EIP is at st_do_scsi+0x2e0/0x340 John> [ 354.806668] EAX: 00000000 EBX: 00000000 ECX: c16e1f80 EDX: f7f87050 John> [ 354.881731] ESI: f7f877d0 EDI: 00001000 EBP: f7f87000 ESP: f7167db0 John> [ 354.956788] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 John> [ 355.021452] Process stinit (pid: 1795, ti=f7167000 task=f74d7030 John> task.ti=f7167000) John> [ 355.110028] Stack: 00000003 f7f87050 00000000 00000000 00d59f80 John> 00000000 f75cf9e0 c0359840 John> [ 355.211879] 000000d0 f7167e54 f7d2bc00 f75cf9e0 f7d2bc18 John> 00000000 00000006 f7167e54 John> [ 355.313757] f7d2bc00 f7167e64 f7f87000 c0358730 00000006 John> 00000002 000dbba0 00000000 John> [ 355.415639] Call Trace: John> [ 355.447258] [<c0359840>] st_sleep_done+0x0/0x70 John> [ 355.502773] [<c0358730>] check_tape+0x510/0x640 John> [ 355.558284] [<c0359c9b>] st_open+0x18b/0x220 John> [ 355.610677] [<c0171850>] exact_match+0x0/0x10 John> [ 355.664113] [<c0359b10>] st_open+0x0/0x220 John> [ 355.714429] [<c0171f2f>] chrdev_open+0x9f/0x190 John> [ 355.769945] [<c0171e90>] chrdev_open+0x0/0x190 John> [ 355.824418] [<c016d685>] __dentry_open+0xb5/0x2a0 John> [ 355.882013] [<c01762cb>] permission+0xdb/0x100 John> [ 355.936486] [<c016d937>] nameidata_to_filp+0x47/0x60 John> [ 355.997200] [<c017985d>] open_pathname+0x17d/0x740 John> [ 356.055831] [<c011fa10>] update_curr+0x80/0x110 John> [ 356.111345] [<c0123792>] scheduler_tick+0xe2/0x130 John> [ 356.169979] [<c0177765>] getname+0xa5/0xc0 John> [ 356.220294] [<c016d4bc>] do_sys_open+0x4c/0xe0 John> [ 356.274770] [<c016d58c>] sys_open+0x1c/0x20 John> [ 356.326123] [<c0103f6e>] syscall_call+0x7/0xb John> [ 356.379559] ======================= John> [ 356.422393] Code: 32 8b 54 24 28 89 44 24 2c 89 50 74 e9 ba fd ff ff 0f 0b eb fe 8d b6 00 00 00 00 0f 0b eb fe 0f 0b eb fe 0f 0b eb fe 8d 74 26 00 <0f> 0b eb fe 0f 0b eb fe 64 a1 00 50 6e c0 8b 40 04 8b 40 08 a8 John> [ 356.661693] EIP: [<c0356bd0>] st_do_scsi+0x2e0/0x340 SS:ESP John> 0068:f7167db0 Just to add some additional information, when I use Bacula to load a new tape into a drive (using mtx really) I get yet another BUG on all my screens: jfsnew kernel: [60861.268812] ------------[ cut here ]------------ jfsnew kernel: [60861.388789] invalid opcode: 0000 [#2] SMP jfsnew kernel: [60861.438055] last sysfs file: /sys/devices/pci0000:00/0000:00:13.0/0000:03:0e.0/local_cpus jfsnew kernel: [60862.019200] Process mt (pid: 8860, ti=c6967000 task=c6908570 task.ti=c6967000) jfsnew kernel: [60862.103613] Stack: 00000003 f745e050 00000000 00000000 00d59f80 00000000 f135bd60 c0359840 jfsnew kernel: [60862.204859] 000000d0 c6967e54 f7d2b600 f135bd60 f7d2b618 00000000 00000006 c6967e54 jfsnew kernel: [60862.305804] f7d2b600 c6967e64 f745e000 c0358730 00000006 00000002 000dbba0 00000000 jfsnew kernel: [60862.406746] Call Trace: jfsnew kernel: [60862.438156] [<c0359840>] st_sleep_done+0x0/0x70 jfsnew kernel: [60862.493665] [<c0358730>] check_tape+0x510/0x640 jfsnew kernel: [60862.549179] [<c0359c9b>] st_open+0x18b/0x220 jfsnew kernel: [60862.601572] [<c0359b10>] st_open+0x0/0x220 jfsnew kernel: [60862.651886] [<c0171f2f>] chrdev_open+0x9f/0x190 jfsnew kernel: [60862.707402] [<c0171e90>] chrdev_open+0x0/0x190 jfsnew kernel: [60862.761876] [<c016d685>] __dentry_open+0xb5/0x2a0 jfsnew kernel: [60862.819469] [<c01762cb>] permission+0xdb/0x100 jfsnew kernel: [60862.873946] [<c016d937>] nameidata_to_filp+0x47/0x60 jfsnew kernel: [60862.934659] [<c017985d>] open_pathname+0x17d/0x740 jfsnew kernel: [60862.993292] [<c015d85f>] handle_mm_fault+0xff/0x580 jfsnew kernel: [60863.052966] [<c0177765>] getname+0xa5/0xc0 jfsnew kernel: [60863.103277] [<c016d4bc>] do_sys_open+0x4c/0xe0 jfsnew kernel: [60863.157752] [<c016d58c>] sys_open+0x1c/0x20 jfsnew kernel: [60863.209110] [<c0103f6e>] syscall_call+0x7/0xb jfsnew kernel: [60863.262544] [<c04e0000>] sunrpc_cache_update+0x140/0x180 jfsnew kernel: [60863.327413] ======================= jfsnew kernel: [60863.370246] Code: 32 8b 54 24 28 89 44 24 2c 89 50 74 e9 ba fd ff ff 0f 0b eb fe 8d b6 00 00 00 00 0f 0b eb fe 0f 0b eb fe 0f 0b eb fe 8d 74 26 00 <0f> 0b eb fe 0f 0b eb fe 64 a1 00 50 6e c0 8b 40 04 8b 40 08 a8 jfsnew kernel: [60863.602895] EIP: [<c0356bd0>] st_do_scsi+0x2e0/0x340 SS:ESP 0068:c6967db0 I wonder if this has something to do with sysfs stuff that Greg and crew have been working on? I'll try dropping back to 2.6.24-rc5 once I get my backup done. Hmm... now I can't even see any of my tape drives at all, even using mt from the command line. Oh well, time to reboot into plain 2.6.24-rc5 and see how it goes. John - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
