Re: [PATCH V2 3/6] phy: qcom-qmp-ufs: Refactor UFS PHY reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/03/2025 15:49, Nitin Rawat wrote:
Refactor the UFS PHY reset handling to parse the reset logic only once
during probe, instead of every resume.

Move the UFS PHY reset parsing logic from qmp_phy_power_on to
qmp_ufs_probe to avoid unnecessary parsing during resume.

Co-developed-by: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@xxxxxxxxxxx>
Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
---
  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 104 ++++++++++++------------
  1 file changed, 50 insertions(+), 54 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 0089ee80f852..3a80c2c110d2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -1757,32 +1757,6 @@ static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg
  	qmp_ufs_init_all(qmp, &cfg->tbls_hs_b);
  }

-static int qmp_ufs_com_init(struct qmp_ufs *qmp)
-{
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
-	void __iomem *pcs = qmp->pcs;
-	int ret;
-
-	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
-		return ret;
-	}
-
-	ret = clk_bulk_prepare_enable(qmp->num_clks, qmp->clks);
-	if (ret)
-		goto err_disable_regulators;
-
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
-
-	return 0;
-
-err_disable_regulators:
-	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
-
-	return ret;
-}
-
  static int qmp_ufs_com_exit(struct qmp_ufs *qmp)
  {
  	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -1800,41 +1774,27 @@ static int qmp_ufs_power_on(struct phy *phy)
  {
  	struct qmp_ufs *qmp = phy_get_drvdata(phy);
  	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	void __iomem *pcs = qmp->pcs;
  	int ret;
-	dev_vdbg(qmp->dev, "Initializing QMP phy\n");
-
-	if (cfg->no_pcs_sw_reset) {
-		/*
-		 * Get UFS reset, which is delayed until now to avoid a
-		 * circular dependency where UFS needs its PHY, but the PHY
-		 * needs this UFS reset.
-		 */
-		if (!qmp->ufs_reset) {
-			qmp->ufs_reset =
-				devm_reset_control_get_exclusive(qmp->dev,
-								 "ufsphy");
-
-			if (IS_ERR(qmp->ufs_reset)) {
-				ret = PTR_ERR(qmp->ufs_reset);
-				dev_err(qmp->dev,
-					"failed to get UFS reset: %d\n",
-					ret);
-
-				qmp->ufs_reset = NULL;
-				return ret;
-			}
-		}

-		ret = reset_control_assert(qmp->ufs_reset);
-		if (ret)
-			return ret;
+	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
+	if (ret) {
+		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
+		return ret;
  	}

-	ret = qmp_ufs_com_init(qmp);
+	ret = clk_bulk_prepare_enable(qmp->num_clks, qmp->clks);
  	if (ret)
-		return ret;
+		goto err_disable_regulators;
+
+	qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);

  	return 0;
+
+err_disable_regulators:
+	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
+
+	return ret;
  }

This change is too fuzzy, please introduce qmp_ufs_get_phy_reset()
in a patch, move qmp_ufs_com_init() inline in qmp_ufs_power_on()
in a second time, and finally move reset_control_assert() to
calibrate in a third patch (and explain why).

Thanks,
Neil


  static int qmp_ufs_phy_calibrate(struct phy *phy)
@@ -1846,6 +1806,10 @@ static int qmp_ufs_phy_calibrate(struct phy *phy)
  	unsigned int val;
  	int ret;

+	ret = reset_control_assert(qmp->ufs_reset);
+	if (ret)
+		return ret;
+
  	qmp_ufs_init_registers(qmp, cfg);

  	ret = reset_control_deassert(qmp->ufs_reset);
@@ -2088,6 +2052,34 @@ static int qmp_ufs_parse_dt(struct qmp_ufs *qmp)
  	return 0;
  }

+static int qmp_ufs_get_phy_reset(struct qmp_ufs *qmp)
+{
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	int ret;
+
+	if (!cfg->no_pcs_sw_reset)
+		return 0;
+
+	/*
+	 * Get UFS reset, which is delayed until now to avoid a
+	 * circular dependency where UFS needs its PHY, but the PHY
+	 * needs this UFS reset.
+	 */
+	if (!qmp->ufs_reset) {
+		qmp->ufs_reset =
+		devm_reset_control_get_exclusive(qmp->dev, "ufsphy");
+
+		if (IS_ERR(qmp->ufs_reset)) {
+			ret = PTR_ERR(qmp->ufs_reset);
+			dev_err(qmp->dev, "failed to get PHY reset: %d\n", ret);
+			qmp->ufs_reset = NULL;
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
  static int qmp_ufs_probe(struct platform_device *pdev)
  {
  	struct device *dev = &pdev->dev;
@@ -2114,6 +2106,10 @@ static int qmp_ufs_probe(struct platform_device *pdev)
  	if (ret)
  		return ret;

+	ret = qmp_ufs_get_phy_reset(qmp);
+	if (ret)
+		return ret;
+
  	/* Check for legacy binding with child node. */
  	np = of_get_next_available_child(dev->of_node, NULL);
  	if (np) {
--
2.48.1







[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux