When an IOCTL times out and driver issues a target reset, if firmware
fails the task management elevate the recovery by issuing a diag reset to
controller.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
---
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index a731622f2f65..13ba91d21fbb 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -716,6 +716,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
size_t data_in_sz = 0;
long ret;
u16 device_handle = MPT3SAS_INVALID_DEVICE_HANDLE;
+ int tm_ret;
issue_reset = 0;
@@ -1174,18 +1175,25 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
if (pcie_device && (!ioc->tm_custom_handling) &&
(!(mpt3sas_scsih_is_pcie_scsi_device(
pcie_device->device_info))))
- mpt3sas_scsih_issue_locked_tm(ioc,
+ tm_ret = mpt3sas_scsih_issue_locked_tm(ioc,
le16_to_cpu(mpi_request->FunctionDependent1),
0, 0, 0,
MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
0, pcie_device->reset_timeout,
MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE);
else
- mpt3sas_scsih_issue_locked_tm(ioc,
+ tm_ret = mpt3sas_scsih_issue_locked_tm(ioc,
le16_to_cpu(mpi_request->FunctionDependent1),
0, 0, 0,
MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
0, 30, MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET);
+
+ if (tm_ret != SUCCESS) {
+ ioc_info(ioc,
+ "target reset failed, issue hard reset: handle (0x%04x)\n",
+ le16_to_cpu(mpi_request->FunctionDependent1));
+ mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+ }
} else
mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
}
--
2.43.0
