From: Sayali Lokhande <quic_sayalil@xxxxxxxxxxx> Add UFS support to the QCS615 Ride platform. The UFS host controller and QMP UFS PHY hardware of QCS615 are derived from SM6115. Include the relevant binding documents accordingly. Additionally, configure UFS-related clock, power, and interconnect settings in the device tree. This patch series depends on below patch series: https://lore.kernel.org/all/20241104-add_initial_support_for_qcs615-v5-0-9dde8d7b80b0@xxxxxxxxxxx/ https://lore.kernel.org/all/20241105032107.9552-1-quic_qqzhou@xxxxxxxxxxx/ https://lore.kernel.org/all/20241212-correct_gpio_ranges-v1-0-c5f20d61882f@xxxxxxxxxxx/ Signed-off-by: Xin Liu <quic_liuxin@xxxxxxxxxxx> --- Changes in v4: - PATCH 2/3: Modify ICC(cpu to ufs); delete redundant required-opps. - PATCH 3/3: Add ufs reset-gpios. - Link to v3: https://lore.kernel.org/all/20241122064428.278752-1-quic_liuxin@xxxxxxxxxxx/ Changes in v3: - PATCH 1/3: Adjust the order of SOB. - PATCH 2/3: Modify some formatting issues: Wrong indentation, split into one entry per line. - Link to v2: https://lore.kernel.org/all/20241119022050.2995511-1-quic_liuxin@xxxxxxxxxxx/ Changes in v2: - PATCH 1/3:Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> - PATCH 2/3: Use an OPP table instead of freq-table-hz.And modify some formatting issues. - PATCH 3/3: Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx> - Link to v1: https://lore.kernel.org/all/20241017042300.872963-1-quic_liuxin@xxxxxxxxxxx/ Xin Liu (3): dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615 arm64: dts: qcom: qcs615: add UFS node arm64: dts: qcom: qcs615-ride: Enable UFS node .../devicetree/bindings/ufs/qcom,ufs.yaml | 2 + arch/arm64/boot/dts/qcom/qcs615-ride.dts | 17 +++ arch/arm64/boot/dts/qcom/qcs615.dtsi | 113 ++++++++++++++++++ 3 files changed, 132 insertions(+) --- base-commit: ec29543c01b3dbfcb9a2daa4e0cd33afb3c30c39 -- 2.34.1
