From: Magnus Lindholm <linmag7@xxxxxxxxx> [ Upstream commit c064de86d2a3909222d5996c5047f64c7a8f791b ] Fix the hardware revision numbering for Qlogic ISP1020/1040 boards. HWMASK suggests that the revision number only needs four bits, this is consistent with how NetBSD does things in their ISP driver. Verified on a IPS1040B which is seen as rev 5 not as BIT_4. Signed-off-by: Magnus Lindholm <linmag7@xxxxxxxxx> Link: https://lore.kernel.org/r/20241113225636.2276-1-linmag7@xxxxxxxxx Reviewed-by: Christoph Hellwig <hch@xxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/qla1280.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h index e7820b5bca38c..c0a9251b2bed2 100644 --- a/drivers/scsi/qla1280.h +++ b/drivers/scsi/qla1280.h @@ -117,12 +117,12 @@ struct device_reg { uint16_t id_h; /* ID high */ uint16_t cfg_0; /* Configuration 0 */ #define ISP_CFG0_HWMSK 0x000f /* Hardware revision mask */ -#define ISP_CFG0_1020 BIT_0 /* ISP1020 */ -#define ISP_CFG0_1020A BIT_1 /* ISP1020A */ -#define ISP_CFG0_1040 BIT_2 /* ISP1040 */ -#define ISP_CFG0_1040A BIT_3 /* ISP1040A */ -#define ISP_CFG0_1040B BIT_4 /* ISP1040B */ -#define ISP_CFG0_1040C BIT_5 /* ISP1040C */ +#define ISP_CFG0_1020 1 /* ISP1020 */ +#define ISP_CFG0_1020A 2 /* ISP1020A */ +#define ISP_CFG0_1040 3 /* ISP1040 */ +#define ISP_CFG0_1040A 4 /* ISP1040A */ +#define ISP_CFG0_1040B 5 /* ISP1040B */ +#define ISP_CFG0_1040C 6 /* ISP1040C */ uint16_t cfg_1; /* Configuration 1 */ #define ISP_CFG1_F128 BIT_6 /* 128-byte FIFO threshold */ #define ISP_CFG1_F64 BIT_4|BIT_5 /* 128-byte FIFO threshold */ -- 2.43.0
