From: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx> [ Upstream commit 711201a8b8334a397440ac0b859df0054e174bc9 ] The driver, through the SAS transport, exposes a sysfs interface to enable/disable PHYs in a controller/expander setup. When multiple PHYs are disabled and enabled in rapid succession, the persistent and current config pages related to SAS IO unit/SAS Expander pages could get corrupted. Use separate memory for each config request. Signed-off-by: Prayas Patel <prayas.patel@xxxxxxxxxxxx> Signed-off-by: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20241110194405.10108-3-ranjan.kumar@xxxxxxxxxxxx Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/scsi/mpi3mr/mpi3mr.h | 9 ---- drivers/scsi/mpi3mr/mpi3mr_fw.c | 81 ++++++--------------------------- 2 files changed, 13 insertions(+), 77 deletions(-) diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h index 81bb408ce56d8..1e715fd65a7d4 100644 --- a/drivers/scsi/mpi3mr/mpi3mr.h +++ b/drivers/scsi/mpi3mr/mpi3mr.h @@ -134,8 +134,6 @@ extern atomic64_t event_counter; #define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */ -#define MPI3MR_DEFAULT_CFG_PAGE_SZ 1024 /* in bytes */ - #define MPI3MR_RESET_TOPOLOGY_SETTLE_TIME 10 #define MPI3MR_SCMD_TIMEOUT (60 * HZ) @@ -1133,9 +1131,6 @@ struct scmd_priv { * @io_throttle_low: I/O size to stop throttle in 512b blocks * @num_io_throttle_group: Maximum number of throttle groups * @throttle_groups: Pointer to throttle group info structures - * @cfg_page: Default memory for configuration pages - * @cfg_page_dma: Configuration page DMA address - * @cfg_page_sz: Default configuration page memory size * @sas_transport_enabled: SAS transport enabled or not * @scsi_device_channel: Channel ID for SCSI devices * @transport_cmds: Command tracker for SAS transport commands @@ -1332,10 +1327,6 @@ struct mpi3mr_ioc { u16 num_io_throttle_group; struct mpi3mr_throttle_group_info *throttle_groups; - void *cfg_page; - dma_addr_t cfg_page_dma; - u16 cfg_page_sz; - u8 sas_transport_enabled; u8 scsi_device_channel; struct mpi3mr_drv_cmd transport_cmds; diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index f1ab76351bd81..2e6245bd4282e 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -4186,17 +4186,6 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc) mpi3mr_read_tsu_interval(mrioc); mpi3mr_print_ioc_info(mrioc); - if (!mrioc->cfg_page) { - dprint_init(mrioc, "allocating config page buffers\n"); - mrioc->cfg_page_sz = MPI3MR_DEFAULT_CFG_PAGE_SZ; - mrioc->cfg_page = dma_alloc_coherent(&mrioc->pdev->dev, - mrioc->cfg_page_sz, &mrioc->cfg_page_dma, GFP_KERNEL); - if (!mrioc->cfg_page) { - retval = -1; - goto out_failed_noretry; - } - } - dprint_init(mrioc, "allocating host diag buffers\n"); mpi3mr_alloc_diag_bufs(mrioc); @@ -4768,11 +4757,7 @@ void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc) mrioc->admin_req_base, mrioc->admin_req_dma); mrioc->admin_req_base = NULL; } - if (mrioc->cfg_page) { - dma_free_coherent(&mrioc->pdev->dev, mrioc->cfg_page_sz, - mrioc->cfg_page, mrioc->cfg_page_dma); - mrioc->cfg_page = NULL; - } + if (mrioc->pel_seqnum_virt) { dma_free_coherent(&mrioc->pdev->dev, mrioc->pel_seqnum_sz, mrioc->pel_seqnum_virt, mrioc->pel_seqnum_dma); @@ -5392,55 +5377,6 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc, return retval; } - -/** - * mpi3mr_free_config_dma_memory - free memory for config page - * @mrioc: Adapter instance reference - * @mem_desc: memory descriptor structure - * - * Check whether the size of the buffer specified by the memory - * descriptor is greater than the default page size if so then - * free the memory pointed by the descriptor. - * - * Return: Nothing. - */ -static void mpi3mr_free_config_dma_memory(struct mpi3mr_ioc *mrioc, - struct dma_memory_desc *mem_desc) -{ - if ((mem_desc->size > mrioc->cfg_page_sz) && mem_desc->addr) { - dma_free_coherent(&mrioc->pdev->dev, mem_desc->size, - mem_desc->addr, mem_desc->dma_addr); - mem_desc->addr = NULL; - } -} - -/** - * mpi3mr_alloc_config_dma_memory - Alloc memory for config page - * @mrioc: Adapter instance reference - * @mem_desc: Memory descriptor to hold dma memory info - * - * This function allocates new dmaable memory or provides the - * default config page dmaable memory based on the memory size - * described by the descriptor. - * - * Return: 0 on success, non-zero on failure. - */ -static int mpi3mr_alloc_config_dma_memory(struct mpi3mr_ioc *mrioc, - struct dma_memory_desc *mem_desc) -{ - if (mem_desc->size > mrioc->cfg_page_sz) { - mem_desc->addr = dma_alloc_coherent(&mrioc->pdev->dev, - mem_desc->size, &mem_desc->dma_addr, GFP_KERNEL); - if (!mem_desc->addr) - return -ENOMEM; - } else { - mem_desc->addr = mrioc->cfg_page; - mem_desc->dma_addr = mrioc->cfg_page_dma; - memset(mem_desc->addr, 0, mrioc->cfg_page_sz); - } - return 0; -} - /** * mpi3mr_post_cfg_req - Issue config requests and wait * @mrioc: Adapter instance reference @@ -5596,8 +5532,12 @@ static int mpi3mr_process_cfg_req(struct mpi3mr_ioc *mrioc, cfg_req->page_length = cfg_hdr->page_length; cfg_req->page_version = cfg_hdr->page_version; } - if (mpi3mr_alloc_config_dma_memory(mrioc, &mem_desc)) - goto out; + + mem_desc.addr = dma_alloc_coherent(&mrioc->pdev->dev, + mem_desc.size, &mem_desc.dma_addr, GFP_KERNEL); + + if (!mem_desc.addr) + return retval; mpi3mr_add_sg_single(&cfg_req->sgl, sgl_flags, mem_desc.size, mem_desc.dma_addr); @@ -5626,7 +5566,12 @@ static int mpi3mr_process_cfg_req(struct mpi3mr_ioc *mrioc, } out: - mpi3mr_free_config_dma_memory(mrioc, &mem_desc); + if (mem_desc.addr) { + dma_free_coherent(&mrioc->pdev->dev, mem_desc.size, + mem_desc.addr, mem_desc.dma_addr); + mem_desc.addr = NULL; + } + return retval; } -- 2.43.0
