On Tue, Nov 26, 2024 at 07:50:08PM +0800, Qiang Ma wrote: > Problem: > When the system disk uses the scsi disk bus, The main > qemu command line includes: > ... > -device virtio-scsi-pci,id=scsi0 \ > -device scsi-hd,scsi-id=1,drive=drive-virtio-disk > -drive id=drive-virtio-disk,if=none,file=/home/kvm/test.qcow2 > ... > > The dmesg log is as follows:: > > [ 50.304591][ T4382] sd 0:0:0:0: [sda] Synchronizing SCSI cache > [ 50.377002][ T4382] kexec_core: Starting new kernel > [ 50.669775][ T194] psci: CPU1 killed (polled 0 ms) > [ 50.849665][ T194] psci: CPU2 killed (polled 0 ms) > [ 51.109625][ T194] psci: CPU3 killed (polled 0 ms) > [ 51.319594][ T194] psci: CPU4 killed (polled 0 ms) > [ 51.489667][ T194] psci: CPU5 killed (polled 0 ms) > [ 51.709582][ T194] psci: CPU6 killed (polled 0 ms) > [ 51.949508][ T10] psci: CPU7 killed (polled 0 ms) > [ 52.139499][ T10] psci: CPU8 killed (polled 0 ms) > [ 52.289426][ T10] psci: CPU9 killed (polled 0 ms) > [ 52.439552][ T10] psci: CPU10 killed (polled 0 ms) > [ 52.579525][ T10] psci: CPU11 killed (polled 0 ms) > [ 52.709501][ T10] psci: CPU12 killed (polled 0 ms) > [ 52.819509][ T194] psci: CPU13 killed (polled 0 ms) > [ 52.919509][ T194] psci: CPU14 killed (polled 0 ms) > [ 243.214009][ T115] INFO: task kworker/0:1:10 blocked for more than 122 seconds. > [ 243.214810][ T115] Not tainted 6.6.0+ #1 > [ 243.215517][ T115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. > [ 243.216390][ T115] task:kworker/0:1 state:D stack:0 pid:10 ppid:2 flags:0x00000008 > [ 243.217299][ T115] Workqueue: events vmstat_shepherd > [ 243.217816][ T115] Call trace: > [ 243.218133][ T115] __switch_to+0x130/0x1e8 > [ 243.218568][ T115] __schedule+0x660/0xcf8 > [ 243.219013][ T115] schedule+0x58/0xf0 > [ 243.219402][ T115] percpu_rwsem_wait+0xb0/0x1d0 > [ 243.219880][ T115] __percpu_down_read+0x40/0xe0 > [ 243.220353][ T115] cpus_read_lock+0x5c/0x70 > [ 243.220795][ T115] vmstat_shepherd+0x40/0x140 > [ 243.221250][ T115] process_one_work+0x170/0x3c0 > [ 243.221726][ T115] worker_thread+0x234/0x3b8 > [ 243.222176][ T115] kthread+0xf0/0x108 > [ 243.222564][ T115] ret_from_fork+0x10/0x20 > ... > [ 243.254080][ T115] INFO: task kworker/0:2:194 blocked for more than 122 seconds. > [ 243.254834][ T115] Not tainted 6.6.0+ #1 > [ 243.255529][ T115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. > [ 243.256378][ T115] task:kworker/0:2 state:D stack:0 pid:194 ppid:2 flags:0x00000008 > [ 243.257284][ T115] Workqueue: events work_for_cpu_fn > [ 243.257793][ T115] Call trace: > [ 243.258111][ T115] __switch_to+0x130/0x1e8 > [ 243.258541][ T115] __schedule+0x660/0xcf8 > [ 243.258971][ T115] schedule+0x58/0xf0 > [ 243.259360][ T115] schedule_timeout+0x280/0x2f0 > [ 243.259832][ T115] wait_for_common+0xcc/0x2d8 > [ 243.260287][ T115] wait_for_completion+0x20/0x38 > [ 243.260767][ T115] cpuhp_kick_ap+0xe8/0x278 > [ 243.261207][ T115] cpuhp_kick_ap_work+0x5c/0x188 > [ 243.261688][ T115] _cpu_down+0x120/0x378 > [ 243.262103][ T115] __cpu_down_maps_locked+0x20/0x38 > [ 243.262609][ T115] work_for_cpu_fn+0x24/0x40 > [ 243.263059][ T115] process_one_work+0x170/0x3c0 > [ 243.263533][ T115] worker_thread+0x234/0x3b8 > [ 243.263981][ T115] kthread+0xf0/0x108 > [ 243.264405][ T115] ret_from_fork+0x10/0x20 > [ 243.264846][ T115] INFO: task kworker/15:2:639 blocked for more than 122 seconds. > [ 243.265602][ T115] Not tainted 6.6.0+ #1 > [ 243.266296][ T115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. > [ 243.267143][ T115] task:kworker/15:2 state:D stack:0 pid:639 ppid:2 flags:0x00000008 > [ 243.268044][ T115] Workqueue: events_freezable_power_ disk_events_workfn > [ 243.268727][ T115] Call trace: > [ 243.269051][ T115] __switch_to+0x130/0x1e8 > [ 243.269481][ T115] __schedule+0x660/0xcf8 > [ 243.269903][ T115] schedule+0x58/0xf0 > [ 243.270293][ T115] schedule_timeout+0x280/0x2f0 > [ 243.270763][ T115] io_schedule_timeout+0x50/0x70 > [ 243.271245][ T115] wait_for_common_io.constprop.0+0xb0/0x298 > [ 243.271830][ T115] wait_for_completion_io+0x1c/0x30 > [ 243.272335][ T115] blk_execute_rq+0x1d8/0x278 > [ 243.272793][ T115] scsi_execute_cmd+0x114/0x238 > [ 243.273267][ T115] sr_check_events+0xc8/0x310 [sr_mod] > [ 243.273808][ T115] cdrom_check_events+0x2c/0x50 [cdrom] > [ 243.274408][ T115] sr_block_check_events+0x34/0x48 [sr_mod] > [ 243.274994][ T115] disk_check_events+0x44/0x1b0 > [ 243.275468][ T115] disk_events_workfn+0x20/0x38 > [ 243.275939][ T115] process_one_work+0x170/0x3c0 > [ 243.276410][ T115] worker_thread+0x234/0x3b8 > [ 243.276855][ T115] kthread+0xf0/0x108 > [ 243.277241][ T115] ret_from_fork+0x10/0x20 Question is why this scsi command can't be completed? When blk_mq_hctx_notify_offline() is called, the CPU isn't shutdown yet, and it still can handle interrupt of this SCSI command. Thanks, Ming
