Add ufshc node to rk3576.dtsi, so the board using UFS could
enable it.
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm64/boot/dts/rockchip/rk3576.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index 436232f..32beda2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1110,6 +1110,31 @@
};
};
+ ufshc: ufshc@2a2d0000 {
+ compatible = "rockchip,rk3576-ufshc";
+ reg = <0x0 0x2a2d0000 0 0x10000>, /* 0: HCI standard */
+ <0x0 0x2b040000 0 0x10000>, /* 1: Mphy */
+ <0x0 0x2601f000 0 0x1000>, /* 2: HCI Vendor specified */
+ <0x0 0x2603c000 0 0x1000>, /* 3: Mphy Vendor specified */
+ <0x0 0x2a2e0000 0 0x10000>; /* 4: HCI apb */
+ reg-names = "hci", "mphy", "hci_grf", "mphy_grf", "hci_apb";
+ clocks = <&cru ACLK_UFS_SYS>, <&cru PCLK_USB_ROOT>, <&cru PCLK_MPHY>,
+ <&cru CLK_REF_UFS_CLKOUT>;
+ clock-names = "core", "pclk", "pclk_mphy", "ref_out";
+ assigned-clocks = <&cru CLK_REF_OSC_MPHY>;
+ assigned-clock-parents = <&cru CLK_REF_MPHY_26M>;
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&power RK3576_PD_USB>;
+ pinctrl-0 = <&ufs_refclk>;
+ pinctrl-names = "default";
+ resets = <&cru SRST_A_UFS_BIU>, <&cru SRST_A_UFS_SYS>,
+ <&cru SRST_A_UFS>, <&cru SRST_P_UFS_GRF>;
+ reset-names = "biu", "sys", "ufs", "grf";
+ reset-gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+ };
+
sdmmc: mmc@2a310000 {
compatible = "rockchip,rk3576-dw-mshc";
reg = <0x0 0x2a310000 0x0 0x4000>;
--
2.7.4
