Fix hardware revision numbering for ISP1020/1040. HWMASK
suggest that the revision number only needs four bits, this is consistent
with how NetBSD does things in their ISP driver. verified on a IPS1040B which
is seen as rev 5 not BIT_4. ISP_CFG0_1040A is referenced on line 2187 in qla1280.c
Signed-off-by: Magnus Lindholm <linmag7@xxxxxxxxx>
---
drivers/scsi/qla1280.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h
index d309e2ca14de..796cb493a4df 100644
--- a/drivers/scsi/qla1280.h
+++ b/drivers/scsi/qla1280.h
@@ -116,12 +116,12 @@ struct device_reg {
uint16_t id_h; /* ID high */
uint16_t cfg_0; /* Configuration 0 */
#define ISP_CFG0_HWMSK 0x000f /* Hardware revision mask */
-#define ISP_CFG0_1020 BIT_0 /* ISP1020 */
-#define ISP_CFG0_1020A BIT_1 /* ISP1020A */
-#define ISP_CFG0_1040 BIT_2 /* ISP1040 */
-#define ISP_CFG0_1040A BIT_3 /* ISP1040A */
-#define ISP_CFG0_1040B BIT_4 /* ISP1040B */
-#define ISP_CFG0_1040C BIT_5 /* ISP1040C */
+#define ISP_CFG0_1020 1 /* ISP1020 */
+#define ISP_CFG0_1020A 2 /* ISP1020A */
+#define ISP_CFG0_1040 3 /* ISP1040 */
+#define ISP_CFG0_1040A 4 /* ISP1040A */
+#define ISP_CFG0_1040B 5 /* ISP1040B */
+#define ISP_CFG0_1040C 6 /* ISP1040C */
uint16_t cfg_1; /* Configuration 1 */
#define ISP_CFG1_F128 BIT_6 /* 128-byte FIFO threshold */
#define ISP_CFG1_F64 BIT_4|BIT_5 /* 128-byte FIFO threshold */
--
2.47.0
