Re: [PATCH v4 7/7] scsi: ufs: rockchip: initial support for UFS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




在 2024/11/4 18:57, Ulf Hansson 写道:
On Mon, 4 Nov 2024 at 08:34, Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> wrote:

RK3576 SoC contains a UFS controller, add initial support for it.
The features are:
(1) support UFS 2.0 features
(2) High speed up to HS-G3
(3) 2RX-2TX lanes
(4) auto H8 entry and exit

Software limitation:
(1) HCE procedure: enable controller->enable intr->dme_reset->dme_enable
(2) disable unipro timeout values before power mode change

Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---

Changes in v4:
- deal with power domain of rpm and spm suggested by Ulf
- Fix typo and disable clks in ufs_rockchip_remove
- remove clk_disable_unprepare(host->ref_out_clk) from
   ufs_rockchip_remove


[...]

+#ifdef CONFIG_PM
+static int ufs_rockchip_runtime_suspend(struct device *dev)
+{
+       struct ufs_hba *hba = dev_get_drvdata(dev);
+       struct ufs_rockchip_host *host = ufshcd_get_variant(hba);
+
+       clk_disable_unprepare(host->ref_out_clk);
+
+       /* Shouldn't power down if rpm_lvl is less than level 5. */
+       dev_pm_genpd_rpm_always_on(dev, hba->rpm_lvl < UFS_PM_LVL_5 ? true : false);
+
+       return ufshcd_runtime_suspend(dev);
+}
+
+static int ufs_rockchip_runtime_resume(struct device *dev)
+{
+       struct ufs_hba *hba = dev_get_drvdata(dev);
+       struct ufs_rockchip_host *host = ufshcd_get_variant(hba);
+       int err;
+
+       err = clk_prepare_enable(host->ref_out_clk);
+       if (err) {
+               dev_err(hba->dev, "failed to enable ref out clock %d\n", err);
+               return err;
+       }
+
+       reset_control_assert(host->rst);
+       usleep_range(1, 2);
+       reset_control_deassert(host->rst);
+
+       return ufshcd_runtime_resume(dev);
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int ufs_rockchip_system_suspend(struct device *dev)
+{
+       struct ufs_hba *hba = dev_get_drvdata(dev);
+
+       if (hba->spm_lvl < 5)
+               device_set_wakeup_path(dev);

Please use device_set_awake_path() instead.

Ideally all users of device_set_wakeup_path() should convert into
device_set_awake_path(), it's just that we haven't been able to
complete the conversion yet.

Will use device_set_awake_path().


+       else
+               device_clr_wakeup_path(dev);

This isn't needed. The flag is getting cleared in device_prepare().

+
+       return ufshcd_system_suspend(dev);

Don't you want to disable the clock during system suspend too? If the
device is runtime resumed at this point, the clock will be left
enabled, no?

Good point. Will fix it.


+}
+#endif
+
+static const struct dev_pm_ops ufs_rockchip_pm_ops = {
+       SET_SYSTEM_SLEEP_PM_OPS(ufs_rockchip_system_suspend, ufshcd_system_resume)
+       SET_RUNTIME_PM_OPS(ufs_rockchip_runtime_suspend, ufs_rockchip_runtime_resume, NULL)
+       .prepare         = ufshcd_suspend_prepare,
+       .complete        = ufshcd_resume_complete,
+};
+

[...]

Kind regards
Uffe






[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux