There are three places in the sym2 driver which print out an interrupt
number; all need to be changed to unsigned
Signed-off-by: Matthew Wilcox <willy@xxxxxxxxxxxxxxx>
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 74300dd..0f214c0 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1189,7 +1189,7 @@ static int sym_host_info(struct Scsi_Host *shost, char *ptr, off_t offset, int l
copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, "
"revision id 0x%x\n", np->s.chip_name,
pdev->device, pdev->revision);
- copy_info(&info, "At PCI address %s, IRQ %d\n",
+ copy_info(&info, "At PCI address %s, IRQ %u\n",
pci_name(pdev), pdev->irq);
copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n",
(int) (np->minsync_dt ? np->minsync_dt : np->minsync),
@@ -1275,7 +1275,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
unsigned long flags;
struct sym_fw *fw;
- printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %d\n",
+ printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %u\n",
unit, dev->chip.name, pdev->revision, pci_name(pdev),
pdev->irq);
@@ -1359,7 +1359,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
*/
if (request_irq(pdev->irq, sym53c8xx_intr, IRQF_SHARED, NAME53C8XX,
shost)) {
- printf_err("%s: request irq %d failure\n",
+ printf_err("%s: request irq %u failure\n",
sym_name(np), pdev->irq);
goto attach_failed;
}
--
Intel are signing my paycheques ... these opinions are still mine
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
