[PATCH v2 03/13] scsi: hisi_sas: Add firmware information check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For security purposes, after information is obtained through the FW,
check information to ensure data correctness.

In v1 and v2 hw, the maximum number of PHYs is 9, while in v3 it is 8.
In v2 and v3 hw, the maximum number of hardware queues is 16, while in v1
it is 32.

Also add some debug logs for failure.

Signed-off-by: Yihang Li <liyihang9@xxxxxxxxxx>
Reviewed-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  5 +++++
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 18 ++++++++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 18 ++++++++++++++++++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 20 ++++++++++++++++++++
 5 files changed, 62 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index d223f482488f..a44768bceb9a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -307,6 +307,7 @@ enum {
 
 struct hisi_sas_hw {
 	int (*hw_init)(struct hisi_hba *hisi_hba);
+	int (*fw_info_check)(struct hisi_hba *hisi_hba);
 	int (*interrupt_preinit)(struct hisi_hba *hisi_hba);
 	void (*setup_itct)(struct hisi_hba *hisi_hba,
 			   struct hisi_sas_device *device);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d3dcc4918444..275d45a41b0b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -2450,6 +2450,11 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 	if (hisi_sas_get_fw_info(hisi_hba) < 0)
 		goto err_out;
 
+	if (hisi_hba->hw->fw_info_check) {
+		if (hisi_hba->hw->fw_info_check(hisi_hba))
+			goto err_out;
+	}
+
 	error = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
 	if (error) {
 		dev_err(dev, "No usable DMA addressing method\n");
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 71b5008c3552..70bba55bc5d0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1734,6 +1734,23 @@ static struct attribute *host_v1_hw_attrs[] = {
 
 ATTRIBUTE_GROUPS(host_v1_hw);
 
+static int check_fw_info_v1_hw(struct hisi_hba *hisi_hba)
+{
+	struct device *dev = hisi_hba->dev;
+
+	if (hisi_hba->n_phy < 0 || hisi_hba->n_phy > 9) {
+		dev_err(dev, "invalid phy number from FW\n");
+		return -EINVAL;
+	}
+
+	if (hisi_hba->queue_count < 0 || hisi_hba->queue_count > 32) {
+		dev_err(dev, "invalid queue count from FW\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct scsi_host_template sht_v1_hw = {
 	LIBSAS_SHT_BASE_NO_SLAVE_INIT
 	.device_configure	= hisi_sas_device_configure,
@@ -1747,6 +1764,7 @@ static const struct scsi_host_template sht_v1_hw = {
 
 static const struct hisi_sas_hw hisi_sas_v1_hw = {
 	.hw_init = hisi_sas_v1_init,
+	.fw_info_check = check_fw_info_v1_hw,
 	.setup_itct = setup_itct_v1_hw,
 	.sl_notify_ssp = sl_notify_ssp_v1_hw,
 	.clear_itct = clear_itct_v1_hw,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 342d75f12051..ab6668dc5b77 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3566,6 +3566,23 @@ static void map_queues_v2_hw(struct Scsi_Host *shost)
 	}
 }
 
+static int check_fw_info_v2_hw(struct hisi_hba *hisi_hba)
+{
+	struct device *dev = hisi_hba->dev;
+
+	if (hisi_hba->n_phy < 0 || hisi_hba->n_phy > 9) {
+		dev_err(dev, "invalid phy number from FW\n");
+		return -EINVAL;
+	}
+
+	if (hisi_hba->queue_count < 0 || hisi_hba->queue_count > 16) {
+		dev_err(dev, "invalid queue count from FW\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct scsi_host_template sht_v2_hw = {
 	LIBSAS_SHT_BASE_NO_SLAVE_INIT
 	.device_configure	= hisi_sas_device_configure,
@@ -3582,6 +3599,7 @@ static const struct scsi_host_template sht_v2_hw = {
 
 static const struct hisi_sas_hw hisi_sas_v2_hw = {
 	.hw_init = hisi_sas_v2_init,
+	.fw_info_check = check_fw_info_v2_hw,
 	.interrupt_preinit = hisi_sas_v2_interrupt_preinit,
 	.setup_itct = setup_itct_v2_hw,
 	.slot_index_alloc = slot_index_alloc_quirk_v2_hw,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 980f28d7b87f..d48777fc4bd9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3371,6 +3371,23 @@ static const struct hisi_sas_hw hisi_sas_v3_hw = {
 	.debugfs_snapshot_regs = debugfs_snapshot_regs_v3_hw,
 };
 
+static int check_fw_info_v3_hw(struct hisi_hba *hisi_hba)
+{
+	struct device *dev = hisi_hba->dev;
+
+	if (hisi_hba->n_phy < 0 || hisi_hba->n_phy > 8) {
+		dev_err(dev, "invalid phy number from FW\n");
+		return -EINVAL;
+	}
+
+	if (hisi_hba->queue_count < 0 || hisi_hba->queue_count > 16) {
+		dev_err(dev, "invalid queue count from FW\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static struct Scsi_Host *
 hisi_sas_shost_alloc_pci(struct pci_dev *pdev)
 {
@@ -3401,6 +3418,9 @@ hisi_sas_shost_alloc_pci(struct pci_dev *pdev)
 	if (hisi_sas_get_fw_info(hisi_hba) < 0)
 		goto err_out;
 
+	if (check_fw_info_v3_hw(hisi_hba) < 0)
+		goto err_out;
+
 	if (experimental_iopoll_q_cnt < 0 ||
 		experimental_iopoll_q_cnt >= hisi_hba->queue_count)
 		dev_err(dev, "iopoll queue count %d cannot exceed or equal 16, using default 0\n",
-- 
2.33.0





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux