These macros aren't needed any more. They used to be used for SPARC. Signed-off-by: Matthew Wilcox <willy@xxxxxxxxxxxxxxx> --- drivers/scsi/sym53c8xx_2/sym_glue.c | 11 ++++------- 1 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index e731618..a82ed13 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -54,9 +54,6 @@ #define NAME53C "sym53c" #define NAME53C8XX "sym53c8xx" -#define IRQ_FMT "%d" -#define IRQ_PRM(x) (x) - struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP; unsigned int sym_debug_flags = 0; @@ -1196,8 +1193,8 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len) copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, " "revision id 0x%x\n", np->s.chip_name, np->s.device->device, np->s.device->revision); - copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n", - pci_name(np->s.device), IRQ_PRM(np->s.device->irq)); + copy_info(&info, "At PCI address %s, IRQ %d\n", + pci_name(np->s.device), np->s.device->irq); copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n", (int) (np->minsync_dt ? np->minsync_dt : np->minsync), np->maxwide ? "Wide" : "Narrow", @@ -1283,9 +1280,9 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, unsigned long flags; struct sym_fw *fw; - printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n", + printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %d\n", unit, dev->chip.name, pdev->revision, pci_name(pdev), - IRQ_PRM(pdev->irq)); + pdev->irq); /* * Get the firmware for this chip. -- 1.4.4.2 - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
