Re: [PATCH v2] scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/9/24 9:45 PM, Avri Altman wrote:
Replace manual offset calculations for response_upiu and prd_table in
ufshcd_init_lrb() with pre-calculated offsets already stored in the
utp_transfer_req_desc structure. The pre-calculated offsets are set
differently in ufshcd_host_memory_configure() based on the
UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk, ensuring correct alignment and
access.

Fixes: 26f968d7de82 ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Avri Altman <avri.altman@xxxxxxx>

---
Changes in v2:
  - add Fixes: and Cc: stable tags
  - fix kernel test robot warning about type mismatch by using le16_to_cpu
---
  drivers/ufs/core/ufshcd.c | 5 ++---
  1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 8ea5a82503a9..85251c176ef7 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -2919,9 +2919,8 @@ static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i)
  	struct utp_transfer_req_desc *utrdlp = hba->utrdl_base_addr;
  	dma_addr_t cmd_desc_element_addr = hba->ucdl_dma_addr +
  		i * ufshcd_get_ucd_size(hba);
-	u16 response_offset = offsetof(struct utp_transfer_cmd_desc,
-				       response_upiu);
-	u16 prdt_offset = offsetof(struct utp_transfer_cmd_desc, prd_table);
+	u16 response_offset = le16_to_cpu(utrdlp[i].response_upiu_offset);
+	u16 prdt_offset = le16_to_cpu(utrdlp[i].prd_table_offset);
lrb->utr_descriptor_ptr = utrdlp + i;
  	lrb->utrd_dma_addr = hba->utrdl_dma_addr +

Please always Cc the author of the original patch when posting a
candidate fix.

Alim, since the upstream kernel code seems to work fine with Exynos UFS
host controllers, is the description of UFSHCD_QUIRK_PRDT_BYTE_GRAN
perhaps wrong? I'm referring to the following description:

	/*
	 * This quirk needs to be enabled if the host controller regards
	 * resolution of the values of PRDTO and PRDTL in UTRD as byte.
	 */
	UFSHCD_QUIRK_PRDT_BYTE_GRAN			= 1 << 9,

Thanks,

Bart.




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux