From: Peter Wang <peter.wang@xxxxxxxxxxxx>
ufshcd_abort_all forcibly aborts all on-going commands and the host
controller will automatically fill in the OCS field of the corresponding
response with OCS_ABORTED based on different working modes.
MCQ mode: aborts a command using SQ cleanup, The host controller
will post a Completion Queue entry with OCS = ABORTED.
SDB mode: aborts a command using UTRLCLR. Task Management response
which means a Transfer Request was aborted.
For these two cases, set a flag to notify SCSI to requeue the
command after receiving response with OCS_ABORTED.
Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Peter Wang <peter.wang@xxxxxxxxxxxx>
---
drivers/ufs/core/ufshcd.c | 35 ++++++++++++++++++++---------------
include/ufs/ufshcd.h | 3 +++
2 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index a6f818cdef0e..8380e8861d83 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -3006,6 +3006,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
ufshcd_prepare_lrbp_crypto(scsi_cmd_to_rq(cmd), lrbp);
lrbp->req_abort_skip = false;
+ lrbp->abort_initiated_by_eh = false;
ufshcd_comp_scsi_upiu(hba, lrbp);
@@ -5404,7 +5405,10 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp,
}
break;
case OCS_ABORTED:
- result |= DID_ABORT << 16;
+ if (lrbp->abort_initiated_by_eh)
+ result |= DID_REQUEUE << 16;
+ else
+ result |= DID_ABORT << 16;
break;
case OCS_INVALID_COMMAND_STATUS:
result |= DID_REQUEUE << 16;
@@ -6471,26 +6475,12 @@ static bool ufshcd_abort_one(struct request *rq, void *priv)
struct scsi_device *sdev = cmd->device;
struct Scsi_Host *shost = sdev->host;
struct ufs_hba *hba = shost_priv(shost);
- struct ufshcd_lrb *lrbp = &hba->lrb[tag];
- struct ufs_hw_queue *hwq;
- unsigned long flags;
*ret = ufshcd_try_to_abort_task(hba, tag);
dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag,
hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1,
*ret ? "failed" : "succeeded");
- /* Release cmd in MCQ mode if abort succeeds */
- if (hba->mcq_enabled && (*ret == 0)) {
- hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(lrbp->cmd));
- if (!hwq)
- return 0;
- spin_lock_irqsave(&hwq->cq_lock, flags);
- if (ufshcd_cmd_inflight(lrbp->cmd))
- ufshcd_release_scsi_cmd(hba, lrbp);
- spin_unlock_irqrestore(&hwq->cq_lock, flags);
- }
-
return *ret == 0;
}
@@ -7561,6 +7551,21 @@ int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag)
goto out;
}
+ /*
+ * When the host software receives a "FUNCTION COMPLETE", set flag
+ * to requeue command after receive response with OCS_ABORTED
+ * SDB mode: UTRLCLR Task Management response which means a Transfer
+ * Request was aborted.
+ * MCQ mode: Host will post to CQ with OCS_ABORTED after SQ cleanup
+ *
+ * This flag is set because error handler ufshcd_abort_all forcibly
+ * aborts all commands, and the host controller will automatically
+ * fill in the OCS field of the corresponding response with OCS_ABORTED.
+ * Therefore, upon receiving this response, it needs to be requeued.
+ */
+ if (!err)
+ lrbp->abort_initiated_by_eh = true;
+
err = ufshcd_clear_cmd(hba, tag);
if (err)
dev_err(hba->dev, "%s: Failed clearing cmd at tag %d, err %d\n",
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index 0fd2aebac728..07b5e60e6c44 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -173,6 +173,8 @@ struct ufs_pm_lvl_states {
* @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
* @data_unit_num: the data unit number for the first block for inline crypto
* @req_abort_skip: skip request abort task flag
+ * @abort_initiated_by_eh: The flag is specifically used to handle
+ * ufshcd_err_handler forcibly aborts.
*/
struct ufshcd_lrb {
struct utp_transfer_req_desc *utr_descriptor_ptr;
@@ -202,6 +204,7 @@ struct ufshcd_lrb {
#endif
bool req_abort_skip;
+ bool abort_initiated_by_eh;
};
/**
--
2.45.2
