[PATCH] scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replace manual offset calculations for response_upiu and prd_table in
ufshcd_init_lrb() with pre-calculated offsets already stored in the
utp_transfer_req_desc structure. The pre-calculated offsets are set
differently in ufshcd_host_memory_configure() based on the
UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk, ensuring correct alignment and
access.

Signed-off-by: Avri Altman <avri.altman@xxxxxxx>
---
 drivers/ufs/core/ufshcd.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 8ea5a82503a9..e7ed3625710e 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -2919,9 +2919,8 @@ static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i)
 	struct utp_transfer_req_desc *utrdlp = hba->utrdl_base_addr;
 	dma_addr_t cmd_desc_element_addr = hba->ucdl_dma_addr +
 		i * ufshcd_get_ucd_size(hba);
-	u16 response_offset = offsetof(struct utp_transfer_cmd_desc,
-				       response_upiu);
-	u16 prdt_offset = offsetof(struct utp_transfer_cmd_desc, prd_table);
+	u16 response_offset = utrdlp[i].response_upiu_offset;
+	u16 prdt_offset = utrdlp[i].prd_table_offset;
 
 	lrb->utr_descriptor_ptr = utrdlp + i;
 	lrb->utrd_dma_addr = hba->utrdl_dma_addr +
-- 
2.25.1





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux