From: Peter Wang <peter.wang@xxxxxxxxxxxx>
When setting the ICU bit without using read-modify-write,
SQRTCy will restart SQ again and receive an RTC return
error code 2 (Failure - SQ not stopped).
Additionally, the error log has been modified so that
this type of error can be observed.
Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Peter Wang <peter.wang@xxxxxxxxxxxx>
---
drivers/ufs/core/ufs-mcq.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
index 5891cdacd0b3..3903947dbed1 100644
--- a/drivers/ufs/core/ufs-mcq.c
+++ b/drivers/ufs/core/ufs-mcq.c
@@ -539,7 +539,7 @@ int ufshcd_mcq_sq_cleanup(struct ufs_hba *hba, int task_tag)
struct scsi_cmnd *cmd = lrbp->cmd;
struct ufs_hw_queue *hwq;
void __iomem *reg, *opr_sqd_base;
- u32 nexus, id, val;
+ u32 nexus, id, val, rtc;
int err;
if (hba->quirks & UFSHCD_QUIRK_MCQ_BROKEN_RTC)
@@ -569,17 +569,18 @@ int ufshcd_mcq_sq_cleanup(struct ufs_hba *hba, int task_tag)
opr_sqd_base = mcq_opr_base(hba, OPR_SQD, id);
writel(nexus, opr_sqd_base + REG_SQCTI);
- /* SQRTCy.ICU = 1 */
- writel(SQ_ICU, opr_sqd_base + REG_SQRTC);
+ /* Initiate Cleanup */
+ writel(readl(opr_sqd_base + REG_SQRTC) | SQ_ICU,
+ opr_sqd_base + REG_SQRTC);
/* Poll SQRTSy.CUS = 1. Return result from SQRTSy.RTC */
reg = opr_sqd_base + REG_SQRTS;
err = read_poll_timeout(readl, val, val & SQ_CUS, 20,
MCQ_POLL_US, false, reg);
- if (err)
- dev_err(hba->dev, "%s: failed. hwq=%d, tag=%d err=%ld\n",
- __func__, id, task_tag,
- FIELD_GET(SQ_ICU_ERR_CODE_MASK, readl(reg)));
+ rtc = FIELD_GET(SQ_ICU_ERR_CODE_MASK, readl(reg));
+ if (err || rtc)
+ dev_err(hba->dev, "%s: failed. hwq=%d, tag=%d err=%d RTC=%d\n",
+ __func__, id, task_tag, err, rtc);
if (ufshcd_mcq_sq_start(hba, hwq))
err = -ETIMEDOUT;
--
2.45.2
