[PATCH v3 6/9] ufs: core: Move the ufshcd_device_init(hba, true) call

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move the ufshcd_device_init(hba, true) call from ufshcd_async_scan()
into ufshcd_init(). This patch prepares for moving both scsi_add_host()
calls into ufshcd_add_scsi_host(). Calling ufshcd_device_init() from
ufshcd_init() without holding hba->host_sem is safe. This is safe because
hba->host_sem serializes core code and sysfs callbacks. The
ufshcd_device_init() call is moved before the scsi_add_host() call and
hence happens before any SCSI sysfs attributes are created.

Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
---
 drivers/ufs/core/ufshcd.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index f62fff878980..33e5dfd794a4 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -8926,10 +8926,7 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
 	int ret;
 
 	down(&hba->host_sem);
-	/* Initialize hba, detect and initialize UFS device */
-	ret = ufshcd_device_init(hba, /*init_dev_params=*/true);
-	if (ret == 0)
-		ret = ufshcd_probe_hba(hba);
+	ret = ufshcd_probe_hba(hba);
 	up(&hba->host_sem);
 	if (ret)
 		goto out;
@@ -10623,6 +10620,10 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	 */
 	ufshcd_set_ufs_dev_active(hba);
 
+	err = ufshcd_device_init(hba, /*init_dev_params=*/true);
+	if (err)
+		goto out_disable;
+
 	err = ufshcd_add_scsi_host(hba);
 	if (err)
 		goto out_disable;




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux