Call ufshcd_add_scsi_host() after host controller initialization has completed. This is possible because no code between the old and new ufshcd_add_scsi_host() call site depends on the scsi_add_host() call. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx> --- drivers/ufs/core/ufshcd.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 1b69b370991d..20e00ec5fda8 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -10576,10 +10576,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) hba->is_irq_enabled = true; } - err = ufshcd_add_scsi_host(hba); - if (err) - goto out_disable; - /* Reset the attached device */ ufshcd_device_reset(hba); @@ -10591,7 +10587,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) dev_err(hba->dev, "Host controller enable failed\n"); ufshcd_print_evt_hist(hba); ufshcd_print_host_state(hba); - goto free_tmf_queue; + goto out_disable; } /* @@ -10626,6 +10622,10 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) */ ufshcd_set_ufs_dev_active(hba); + err = ufshcd_add_scsi_host(hba); + if (err) + goto out_disable; + async_schedule(ufshcd_async_scan, hba); ufs_sysfs_add_nodes(hba->dev); @@ -10633,12 +10633,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) ufshcd_pm_qos_init(hba); return 0; -free_tmf_queue: - blk_mq_destroy_queue(hba->tmf_queue); - blk_put_queue(hba->tmf_queue); - blk_mq_free_tag_set(&hba->tmf_tag_set); - if (hba->scsi_host_added) - scsi_remove_host(hba->host); out_disable: hba->is_irq_enabled = false; ufshcd_hba_exit(hba);
