Re: [PATCH 2/16] gdth: split out eisa probing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Boaz Harrosh wrote:
> Split eisa probing into it's own helper, and do proper error unwinding.
> Protect EISA probind by the proper CONFIG_EISA symbol.
>
> Signed-off-by: Christoph Hellwig <hch@xxxxxx>

> @@ -5694,6 +5582,148 @@ static int gdth_isa_probe_one(struct
> scsi_host_template *shtp, ulong32 isa_bios) }
>  #endif /* CONFIG_ISA */
>
> +#ifdef CONFIG_EISA
> +static int gdth_eisa_probe_one(struct scsi_host_template *shtp,
> +		ushort eisa_slot)
> +{
> +	struct Scsi_Host *shp;
> +	gdth_ha_str *ha;
> +	dma_addr_t scratch_dma_handle = 0;
> +	int error, hanum, i;
> +	u8 b;
> +
> +	if (!gdth_search_eisa(eisa_slot))
> +		return -ENXIO;
> +
> +	shp = scsi_register(shtp,sizeof(gdth_ext_str));
> +	if (!shp)
> +		return -ENOMEM;
> +	ha = HADATA(shp);
> +
> +	error = -ENODEV;
> +	if (!gdth_init_eisa(eisa_slot,ha))
> +		goto out_host_put;
> +
> +	/* controller found and initialized */
> +	printk("Configuring GDT-EISA HA at Slot %d IRQ %u\n",
> +		eisa_slot >> 12, ha->irq);
> +
> +	error = request_irq(ha->irq, gdth_interrupt, IRQF_DISABLED, "gdth", ha);
> +	if (error) {
> +		printk("GDT-EISA: Unable to allocate IRQ\n");
> +		goto out_host_put;
> +	}
> +
> +	shp->unchecked_isa_dma = 0;
> +	shp->irq = ha->irq;
> +	shp->dma_channel = 0xff;
> +	hanum = gdth_ctr_count;
> +	gdth_ctr_tab[gdth_ctr_count++] = shp;
> +	gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
> +
> +	NUMDATA(shp)->hanum = (ushort)hanum;
> +	NUMDATA(shp)->busnum= 0;
> +	TRACE2(("EISA detect Bus 0: hanum %d\n",
> +		NUMDATA(shp)->hanum));
> +
> +	ha->pccb = CMDDATA(shp);
> +	ha->ccb_phys = 0L;
> +
> +	error = -ENOMEM;
> +
> +	ha->pdev = NULL;
> +	ha->pscratch = pci_alloc_consistent(ha->pdev, GDTH_SCRATCH,
> +						&scratch_dma_handle);
> +	if (!ha->pscratch)
> +		goto out_free_irq;
> +	ha->scratch_phys = scratch_dma_handle;
> +
> +	ha->pmsg = pci_alloc_consistent(ha->pdev, sizeof(gdth_msg_str),
> +						&scratch_dma_handle);
> +	if (!ha->pmsg)
> +		goto out_free_pscratch;
> +	ha->msg_phys = scratch_dma_handle;
> +
> +#ifdef INT_COAL
> +	ha->coal_stat = pci_alloc_consistent(ha->pdev,
> +			sizeof(gdth_coal_status) * MAXOFFSETS,
> +			&scratch_dma_handle);
> +	if (!ha->coal_stat)
> +		goto out_free_pmsg;
> +	ha->coal_stat_phys = scratch_dma_handle;
> +#endif
> +
> +	ha->ccb_phys = pci_map_single(ha->pdev,ha->pccb,
> +			sizeof(gdth_cmd_str), PCI_DMA_BIDIRECTIONAL);
> +	if (!ha->ccb_phys)
> +		goto out_free_coal_stat;

Same thing as in ISA patch: this is not PCI and we should not hide what we're 
doing so dma_alloc_consistent(NULL, ...) is better IMHO.

Eike

Attachment: signature.asc
Description: This is a digitally signed message part.


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux