Re: [PATCH v3 15/15] blk-mq: use hk cpus only when isolcpus=io_queue is enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 07, 2024 at 02:40:11PM +0200, Daniel Wagner wrote:
> On Tue, Aug 06, 2024 at 10:55:09PM GMT, Ming Lei wrote:
> > On Tue, Aug 06, 2024 at 02:06:47PM +0200, Daniel Wagner wrote:
> > > When isolcpus=io_queue is enabled all hardware queues should run on the
> > > housekeeping CPUs only. Thus ignore the affinity mask provided by the
> > > driver. Also we can't use blk_mq_map_queues because it will map all CPUs
> > > to first hctx unless, the CPU is the same as the hctx has the affinity
> > > set to, e.g. 8 CPUs with isolcpus=io_queue,2-3,6-7 config
> > 
> > What is the expected behavior if someone still tries to submit IO on isolated
> > CPUs?
> 
> If a user thread is issuing an IO the IO is handled by the housekeeping
> CPU, which will cause some noise on the submitting CPU. As far I was
> told this is acceptable. Our customers really don't want to have any
> IO not from their application ever hitting the isolcpus. When their
> application is issuing an IO.
> 
> > BTW, I don't see any change in blk_mq_get_ctx()/blk_mq_map_queue() in this
> > patchset,
> 
> I was trying to figure out what you tried to explain last time with
> hangs, but didn't really understand what the conditions are for this
> problem to occur.

Isolated CPUs are removed from queue mapping in this patchset, when someone
submit IOs from the isolated CPU, what is the correct hctx used for handling
these IOs?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux