[PATCH AUTOSEL 5.10 30/38] usb: uas: set host status byte on data completion error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Shantanu Goel <sgoel01@xxxxxxxxx>

[ Upstream commit 9d32685a251a754f1823d287df233716aa23bcb9 ]

Set the host status byte when a data completion error is encountered
otherwise the upper layer may end up using the invalid zero'ed data.
The following output was observed from scsi/sd.c prior to this fix.

[   11.872824] sd 0:0:0:1: [sdf] tag#9 data cmplt err -75 uas-tag 1 inflight:
[   11.872826] sd 0:0:0:1: [sdf] tag#9 CDB: Read capacity(16) 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00
[   11.872830] sd 0:0:0:1: [sdf] Sector size 0 reported, assuming 512.

Signed-off-by: Shantanu Goel <sgoel01@xxxxxxxxx>
Acked-by: Oliver Neukum <oneukum@xxxxxxxx>
Link: https://lore.kernel.org/r/87msnx4ec6.fsf@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/usb/storage/uas.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index ff6f41e7e0683..ea1680c4cc065 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -424,6 +424,7 @@ static void uas_data_cmplt(struct urb *urb)
 			uas_log_cmd_state(cmnd, "data cmplt err", status);
 		/* error: no data transfered */
 		scsi_set_resid(cmnd, sdb->length);
+		set_host_byte(cmnd, DID_ERROR);
 	} else {
 		scsi_set_resid(cmnd, sdb->length - urb->actual_length);
 	}
-- 
2.43.0





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux