Move the sd_config_write_same() function definition such that its forward
declaration can be removed.
Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
---
drivers/scsi/sd.c | 136 +++++++++++++++++++++++-----------------------
1 file changed, 67 insertions(+), 69 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 8b8a355435b4..30c1792df1b3 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -103,8 +103,6 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC);
#define SD_MINORS 16
-static void sd_config_write_same(struct scsi_disk *sdkp,
- struct queue_limits *lim);
static int sd_revalidate_disk(struct gendisk *);
static void sd_unlock_native_capacity(struct gendisk *disk);
static void scsi_disk_release(struct device *cdev);
@@ -175,6 +173,73 @@ static void sd_config_discard(struct scsi_disk *sdkp, struct queue_limits *lim,
(logical_block_size >> SECTOR_SHIFT);
}
+static void sd_disable_write_same(struct scsi_disk *sdkp)
+{
+ sdkp->device->no_write_same = 1;
+ sdkp->max_ws_blocks = 0;
+ blk_queue_disable_write_zeroes(sdkp->disk->queue);
+}
+
+static void sd_config_write_same(struct scsi_disk *sdkp,
+ struct queue_limits *lim)
+{
+ unsigned int logical_block_size = sdkp->device->sector_size;
+
+ if (sdkp->device->no_write_same) {
+ sdkp->max_ws_blocks = 0;
+ goto out;
+ }
+
+ /* Some devices can not handle block counts above 0xffff despite
+ * supporting WRITE SAME(16). Consequently we default to 64k
+ * blocks per I/O unless the device explicitly advertises a
+ * bigger limit.
+ */
+ if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
+ sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS16_BLOCKS);
+ else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes)
+ sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS10_BLOCKS);
+ else {
+ sdkp->device->no_write_same = 1;
+ sdkp->max_ws_blocks = 0;
+ }
+
+ if (sdkp->lbprz && sdkp->lbpws)
+ sdkp->zeroing_mode = SD_ZERO_WS16_UNMAP;
+ else if (sdkp->lbprz && sdkp->lbpws10)
+ sdkp->zeroing_mode = SD_ZERO_WS10_UNMAP;
+ else if (sdkp->max_ws_blocks)
+ sdkp->zeroing_mode = SD_ZERO_WS;
+ else
+ sdkp->zeroing_mode = SD_ZERO_WRITE;
+
+ if (sdkp->max_ws_blocks &&
+ sdkp->physical_block_size > logical_block_size) {
+ /*
+ * Reporting a maximum number of blocks that is not aligned
+ * on the device physical size would cause a large write same
+ * request to be split into physically unaligned chunks by
+ * __blkdev_issue_write_zeroes() even if the caller of this
+ * functions took care to align the large request. So make sure
+ * the maximum reported is aligned to the device physical block
+ * size. This is only an optional optimization for regular
+ * disks, but this is mandatory to avoid failure of large write
+ * same requests directed at sequential write required zones of
+ * host-managed ZBC disks.
+ */
+ sdkp->max_ws_blocks =
+ round_down(sdkp->max_ws_blocks,
+ bytes_to_logical(sdkp->device,
+ sdkp->physical_block_size));
+ }
+
+out:
+ lim->max_write_zeroes_sectors =
+ sdkp->max_ws_blocks * (logical_block_size >> SECTOR_SHIFT);
+}
+
static void sd_set_flush_flag(struct scsi_disk *sdkp,
struct queue_limits *lim)
{
@@ -1078,73 +1143,6 @@ static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
return sd_setup_write_same10_cmnd(cmd, false);
}
-static void sd_disable_write_same(struct scsi_disk *sdkp)
-{
- sdkp->device->no_write_same = 1;
- sdkp->max_ws_blocks = 0;
- blk_queue_disable_write_zeroes(sdkp->disk->queue);
-}
-
-static void sd_config_write_same(struct scsi_disk *sdkp,
- struct queue_limits *lim)
-{
- unsigned int logical_block_size = sdkp->device->sector_size;
-
- if (sdkp->device->no_write_same) {
- sdkp->max_ws_blocks = 0;
- goto out;
- }
-
- /* Some devices can not handle block counts above 0xffff despite
- * supporting WRITE SAME(16). Consequently we default to 64k
- * blocks per I/O unless the device explicitly advertises a
- * bigger limit.
- */
- if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
- sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
- (u32)SD_MAX_WS16_BLOCKS);
- else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes)
- sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
- (u32)SD_MAX_WS10_BLOCKS);
- else {
- sdkp->device->no_write_same = 1;
- sdkp->max_ws_blocks = 0;
- }
-
- if (sdkp->lbprz && sdkp->lbpws)
- sdkp->zeroing_mode = SD_ZERO_WS16_UNMAP;
- else if (sdkp->lbprz && sdkp->lbpws10)
- sdkp->zeroing_mode = SD_ZERO_WS10_UNMAP;
- else if (sdkp->max_ws_blocks)
- sdkp->zeroing_mode = SD_ZERO_WS;
- else
- sdkp->zeroing_mode = SD_ZERO_WRITE;
-
- if (sdkp->max_ws_blocks &&
- sdkp->physical_block_size > logical_block_size) {
- /*
- * Reporting a maximum number of blocks that is not aligned
- * on the device physical size would cause a large write same
- * request to be split into physically unaligned chunks by
- * __blkdev_issue_write_zeroes() even if the caller of this
- * functions took care to align the large request. So make sure
- * the maximum reported is aligned to the device physical block
- * size. This is only an optional optimization for regular
- * disks, but this is mandatory to avoid failure of large write
- * same requests directed at sequential write required zones of
- * host-managed ZBC disks.
- */
- sdkp->max_ws_blocks =
- round_down(sdkp->max_ws_blocks,
- bytes_to_logical(sdkp->device,
- sdkp->physical_block_size));
- }
-
-out:
- lim->max_write_zeroes_sectors =
- sdkp->max_ws_blocks * (logical_block_size >> SECTOR_SHIFT);
-}
-
static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
{
struct request *rq = scsi_cmd_to_rq(cmd);
