The UIC command timeout default value remains as 500ms.
Allow platform drivers to change the UIC command timeout as they wish.
During product development where a lot of debug logging/printing can
occur, the uart may print from different modules with interrupt disabled
for more than 500ms, causing interrupt starvation and UIC command timeout
as a result. The UIC command timeout may eventually cause a watchdog
timeout unnecessarily. With this change, the platform drivers can set a
different UIC command timeout as desired. The supported values range
from 500ms to 2 seconds.
v3 -> v4: - Addressed Bart's concern about the two string to int conversions
would yield different results.
v2 -> v3: - Addressed Bart's comments. Renamed UIC_CMD_TIMEOUT to
UIC_CMD_TIMEOUT_DEFAULT. Changed "Default.." to "Defaults..".
Removed an extra line in the module description.
v1 -> v2: - Created kernel module parameter namely uic_cmd_timeout
as recommended by Bart. Addressed some other comments.
- Un-do the change in the include/ufs/ufshcd.h file
which added the uic_cmd_timeout field to the hba struct.
- Removed the patch 2 in the series where the UIC command
timeout value was overridden by the platform driver.
Bao D. Nguyen (1):
scsi: ufs: core: Support Updating UIC Command Timeout
drivers/ufs/core/ufshcd.c | 37 ++++++++++++++++++++++++++++++++-----
1 file changed, 32 insertions(+), 5 deletions(-)
--
2.7.4
