From: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Improve multipath fail-overs by mapping firmware errors into
I/O errors.
In some rare instances, firmware does not return the proper error code
for I/O errors caused by a multipath path failure.
Map I/O errors returned by firmware into errors that help the multipath
layer to detect the failure of a path.
Reviewed-by: Gerry Morong <gerry.morong@xxxxxxxxxxxxx>
Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
Signed-off-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
drivers/scsi/smartpqi/smartpqi_init.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index d8df7440bbe1..0dd901445dcc 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -3247,6 +3247,20 @@ static void pqi_process_raid_io_error(struct pqi_io_request *io_request)
sense_data_length);
}
+ if (pqi_cmd_priv(scmd)->this_residual &&
+ !pqi_is_logical_device(scmd->device->hostdata) &&
+ scsi_status == SAM_STAT_CHECK_CONDITION &&
+ host_byte == DID_OK &&
+ sense_data_length &&
+ scsi_normalize_sense(error_info->data, sense_data_length, &sshdr) &&
+ sshdr.sense_key == ILLEGAL_REQUEST &&
+ sshdr.asc == 0x26 &&
+ sshdr.ascq == 0x0) {
+ host_byte = DID_NO_CONNECT;
+ pqi_take_device_offline(scmd->device, "AIO");
+ scsi_build_sense_buffer(0, scmd->sense_buffer, HARDWARE_ERROR, 0x3e, 0x1);
+ }
+
scmd->result = scsi_status;
set_host_byte(scmd, host_byte);
}
@@ -6021,7 +6035,7 @@ static int pqi_scsi_queue_command(struct Scsi_Host *shost, struct scsi_cmnd *scm
ctrl_info = shost_to_hba(shost);
- if (pqi_ctrl_offline(ctrl_info) || pqi_device_in_remove(device)) {
+ if (pqi_ctrl_offline(ctrl_info) || pqi_device_offline(device) || pqi_device_in_remove(device)) {
set_host_byte(scmd, DID_NO_CONNECT);
pqi_scsi_done(scmd);
return 0;
--
2.45.2.827.g557ae147e6
