Re: [PATCH v5 08/10] scsi: ufs: Move the ufshcd_mcq_enable() call

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 08, 2024 at 02:16:03PM -0700, Bart Van Assche wrote:
> Move the ufshcd_mcq_enable() call from inside ufshcd_config_mcq() to the
> callers of this function. No functionality is changed by this patch. This
> patch makes a later patch easier to read ("scsi: ufs: Make .get_hba_mac()
> optional").
> 
> Cc: Peter Wang <peter.wang@xxxxxxxxxxxx>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

- Mani

> ---
>  drivers/ufs/core/ufshcd.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> index 7647d8969001..4c2b60dec43f 100644
> --- a/drivers/ufs/core/ufshcd.c
> +++ b/drivers/ufs/core/ufshcd.c
> @@ -8703,8 +8703,6 @@ static void ufshcd_config_mcq(struct ufs_hba *hba)
>  	ufshcd_mcq_make_queues_operational(hba);
>  	ufshcd_mcq_config_mac(hba, hba->nutrs);
>  
> -	ufshcd_mcq_enable(hba);
> -
>  	dev_info(hba->dev, "MCQ configured, nr_queues=%d, io_queues=%d, read_queue=%d, poll_queues=%d, queue_depth=%d\n",
>  		 hba->nr_hw_queues, hba->nr_queues[HCTX_TYPE_DEFAULT],
>  		 hba->nr_queues[HCTX_TYPE_READ], hba->nr_queues[HCTX_TYPE_POLL],
> @@ -8732,8 +8730,10 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)
>  	ufshcd_set_link_active(hba);
>  
>  	/* Reconfigure MCQ upon reset */
> -	if (hba->mcq_enabled && !init_dev_params)
> +	if (hba->mcq_enabled && !init_dev_params) {
>  		ufshcd_config_mcq(hba);
> +		ufshcd_mcq_enable(hba);
> +	}
>  
>  	/* Verify device initialization by sending NOP OUT UPIU */
>  	ret = ufshcd_verify_dev_init(hba);
> @@ -8757,6 +8757,7 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)
>  			ret = ufshcd_alloc_mcq(hba);
>  			if (!ret) {
>  				ufshcd_config_mcq(hba);
> +				ufshcd_mcq_enable(hba);
>  			} else {
>  				/* Continue with SDB mode */
>  				use_mcq_mode = false;
> @@ -8772,6 +8773,7 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)
>  		} else if (is_mcq_supported(hba)) {
>  			/* UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is set */
>  			ufshcd_config_mcq(hba);
> +			ufshcd_mcq_enable(hba);
>  		}
>  	}
>  

-- 
மணிவண்ணன் சதாசிவம்




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux